#I don’t know why it did this but I don’t know how to fix it or prevent it from happing again

1 messages · Page 1 of 1 (latest)

indigo dock
near venture
#

More information??

indigo dock
molten remnant
#

Only the form

near venture
indigo dock
#

K1 max, sunlu pla+, 100mm/s

near venture
#

There we go

#

Now what exactly is the problem, is it just bad bridging? I can’t really tell from the picture

indigo dock
#

Yeah

#

It’s been with most of my prints

indigo dock
indigo dock
near venture
#

Ok PLA is best at around 210

near venture
indigo dock
#

Yeah when this print is finnished I’ll try

near venture
#

And send me a photo of the print in the slicer so I can know what it’s meant to look like

indigo dock
#

But small things it doesn’t do it on but I took a photo of the other side and that might help I’ll send them side by side

indigo dock
near venture
#

Can I see it in the slicer?

indigo dock
#

Yeah one sec

near venture
#

Alg

indigo dock
indigo dock
near venture
#

Ah I see

#

Have you tried a benchy or any other print other than that mask?

#

Also 100mm/a is a bit fast for a print with such detail, try around 70 and it should work

indigo dock
#

Ok yeah I did and the benchy came out fine and I printed it at 300mm/s

#

But I’ll slow it down and try again

indigo dock
#

The print broke anyway the supports were too dense couldn’t get them off lol but I know how to fix that

near venture
near venture
# indigo dock

It looks good, yea just try to slow it down a bit and see

indigo dock
#

Will do is it ok if I dm you when it’s done it’s gonna take 24 hours to print?

near venture
#

Sure

#

Just post it here

indigo dock
# near venture Sure

so i did another test print and changed it to the creality highspeed filiment and its printing just fine i also slowed it down to 70mm/s imma try to do a big print here but as of right now my problem is fixed thank you

indigo dock
near venture