ugly layers

[velvet lion]

Hello. Still with my layers issue. I dont know what can I test now... In the second photo i see something in the layers

[hallow karma]

What are the print parameters. Print temp, layer height, nozzle size,

Does your model have rounded corners?

Or is also a print issue

[velvet lion]

Default settings for a 0.4 nozzle. 215°, 60° bed. Printed in vase mode

[velvet lion]

Yes

I dont know what causes this. Im trying to fix this during 2 months

[vital zealot]

at what speed?

[velvet lion]

15mm/s

[hallow karma]

is that pla?
are you using input shaper?

[velvet lion]

Yes is pla without input shaper

Here another example on a old piece

[hallow karma]

what printer

[vital zealot]

what about cooling?

[velvet lion]

Ramps with tatara frame, bmg and e3d v6

[velvet lion]

??

[vital zealot]

did you use cooling?

[velvet lion]

yes

[velvet lion]

Another example

[main pebble]

I had the same issues, try to loose wheels and thiten belt, also lubricated your z axis

it loocks like your whole printer is wambling/binding/blocking while printing

also check e=steps

did you ever prined on the higher temp. like 240*C

if yes, check also bownen tube

[velvet lion]

I ever print at 215. But in the tower print have the same issue

[velvet lion]

Is direct

[hallow karma]

thats too hot for pla

have you tried with other filament?

[velvet lion]

No. Is my only filament. Is pla winkle. Recomended temp 190-230

[hallow karma]

the temp tower does it all look like this cube?