#Crashing on install every time
123 messages · Page 1 of 1 (latest)
use a BLACK USB 2.0 port . do whatever you have to do to get that.
and make sure it fits damn snug
Ok I’ll try again with 2.0
use ventoy, and check the checksum from the second white ventoy boot screen,
and compare to the sum on mint site for a perfect match
Did that already it’s a valid iso
see #1295816480256163892 following extreme attention to step 4 b and ALL of step 6 perfectly
and do the flash on a 2.0 port too
see #1367031929999986698 message also
I see this in the console before crash
This was on usb 2.0 and on GPT file system
ISO was verified
I’ve tried 4 different USB slots
bad, bad luck with your usb's then
if you have a second pc in the house, and a router, and this pc above can connect via ethernet, then u can do a LAN installation
@mighty latch
Oh I might try that
or
do this...
do have 2 hdd in this pc?
are u planning on wiping one to put Linux fully installed on it?
@mighty latch
maximize DISK management Window, and show
?
open Windows DISK MANAGEMENT. maximize it. show.
disk 2
is the one that ive been trying to install it on
this screenshot is before reformatting it again after failed install
show current ss
that is it
u have the known-verified mint ISO on Disk 3, in C: somewhere, yes?
disk 2
wtf
well. get a well-verified ISO onto your C: DRIVE
preferably in the root of C: FOR SIMPLICITY
then boot ventoy, hit browse, n go there
i can browse into my C drive in ventoy?
yes
whaat. Ok ill try
instead of booting the iso from the SHIT FLASH
boot it right from C:\
u can still do the checksum too
ok so where do i install ventoy then?
no where if it's on ur usb stick already
ok got it
get ur KNOWN-WORKING ISO on the C:\ root now
ok
see this, scroll down in it a touch for powershell way
yea i got that part done for an iso already
ensure there are NO ISO's on DISK 2 at this time. to avoid later confusion
then boot using the browse thing i said. then once at live desktop, do efibootmgr in terminal
Yup just did that
Well can’t rn I’m booting yea lol
is it Win 11?
Yea
...
Give me one minute something unexpected happened when booting (full system shutdown)
Yea i think i have a deeper issue going on here. I tried both iso files the way you mentioned and both are verified and yes I’m on UEFI
are u in live desktop yes or no?
no
you want me to go back into the mint live boot?
boot live.. at this point, i dont even care how u do it. just get into live desktop of mint
alright
Once in live how do I open efibootmgr
ctrl-alt-t then type it
good
so u booted the ventoy usb n did what, the one on the flash, or browsed to the c: drive to load the ISO this time?
Browsed this time
ok open gparted app from the start menu
Opened
look in the top right selector
u have TWO 1 TB (931 GiB) drives
make sure to choose the one u want to wipe for linux
Done
ur extremely sure that's the one?
Ok done
then after it is put out of use, go to the Device menu item. choose 'create new partition table'
and make it as GPT.
after that is done. run the installer, do the something else option.
or even the "install alongside windows" option would be just fine.
it will summarize it will create 2 partitions, an ESP and a main root ext4 one onto the dev that ur seeing right now in gparted. note its dev name
Ok will do. The installer is crashing whenever I try the boot from C option. I’m gonna try feom USB one more time with the new changes we just applied
k
I’ll lyk when done
Same error
I’ve been trying for a few hours loads of different things idk what the problem is
u chose the 'install alongside Windows' option?
No i chose the “something else” option
open DISKS app and choose the hdd u want linux on, that we earlier wiped. take a photo of its model and serial number
once that is done, powerdown
unplug all other drives inside the pc except the one u just noted
then boot live, and do 'erase disk and install'
i've seen many times too many disks always screw things