gpu showing up as llvmpipe (kernel 570 open)

[cedar swift]

nevermind, even on 550 it shows up as llvmpipe, any help on this? :/

[manic steeple]

log out, press the circle next to your username and take a picture

[manic steeple]

you want to make sure you are using the 1st entry. software rendering will use llvmpipe, which you don't want.

can also attempt to switch to NVIDIA on-demand. then verify it again. also upload inxi -Gxxx info here

[cedar swift]

Graphics:
Device-1: Intel Raptor Lake-S UHD Graphics vendor: ASUSTeK driver: i915
v: kernel arch: Gen-13 ports: active: none off: eDP-1 empty: DP-1, DP-2,
HDMI-A-1, HDMI-A-2 bus-ID: 0000:00:02.0 chip-ID: 8086:a788 class-ID: 0300
Device-2: NVIDIA AD106M [GeForce RTX 4070 Max-Q / Mobile] vendor: ASUSTeK
driver: nvidia v: 570.153.02 arch: Lovelace ports: active: none
off: HDMI-A-3 empty: DP-3,eDP-2 bus-ID: 0000:01:00.0 chip-ID: 10de:2860
class-ID: 0300
Device-3: Sonix USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 bus-ID: 1-8:7 chip-ID: 322e:2122 class-ID: 0e02
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris
gpu: i915,nvidia,nvidia-nvswitch display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 68 s-size: 1434x807mm (56.46x31.77")
s-diag: 1645mm (64.78")
Monitor-1: HDMI-A-3 mapped: HDMI-0 note: disabled pos: primary
model: HISENSE serial: 1735156332 res: 3840x2160 dpi: 68
size: 1430x800mm (56.3x31.5") diag: 1639mm (64.5") modes: max: 3840x2160
min: 640x480
Monitor-2: eDP-1 mapped: eDP-1-1 note: disabled model: MNG007QA1-1
res: 3840x2160 dpi: 142 size: 344x215mm (13.54x8.46") diag: 406mm (16")
modes: 1920x1200
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 2 drv: iris device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia x11: drv: nvidia inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 570.153.02
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4070 Laptop
GPU/PCIe/SSE2

[cedar swift]

Yeah I have tried that too.. same issue

I double chcked to see if secure boot is turned off and it is

im also connecting the laptop to a 4ktv but like I mentioned before with driver 550 everything worked, i just wanted to update to 570 to see if it would be better but after doing that, rolling back to 550 gives me the same issue with llvmpipe like it is now with 570

[manic steeple]

no idea then. if you have a snapshot of your system from before that, you can rollback to when it was working.