Hi, i have all the gauges now for the 737 Forward OHP, there all homemade, they are servos (SG92R) I believe these are 180 degrees, the needles are directly mounted on the servo (not geared) I'm looking for advise on how to get them functioning with Mobiflight I am aware that there has to be an "interpolation" to reverse the servos as they are counter clockwise are they are suitable for the gauges ?. I've seen a mixed bag on this re: steppers servos and such. I have got (VID28-05) Dual concentric steppers for the two gauges that have two needles "CAB PRESSURE & DUCT PRESSURE" and where to set the needle when in the off position physically for all ? thank you for any advice given.
#At the Gauge Stage
mellow quiver
halcyon idol
Hi, i have all the gauges now for the 737 Forward OHP, there all homemade, they ...
Yes, you could use interpolation to invert the scale direction.
The servos will need an external power supply with sufficient current capacity.
neat palm
@mellow quiveris this solved?