#pmdg 737 Thrust Reversers

1 messages · Page 1 of 1 (latest)

proud raven
#

Hi All, I have built Karl from 737DIY 737 throttles quadrant. all is good except the reversers. These use a Potentiometer. I can get them to operate using code from HubHop and they come on fine, trouble is they dont return to off when the levers are returned to the off position. I am sure its something I am doing wrong but after numerous hours of trying I can't get it to work. Has anyone have the same trouble or know of the solution please.
The code I am using is @ 32.0293 * 16383 - -16383 max 16383 min (>K:THROTTLE_SET)

brave hamlet
#

You have reverse potentiometers, separate from the normal throttle potentiometers, correct? If so, why would you have the throttle event code move the entire range including forward thrust?

#

It would seem to me your normal forward throttle levers do the positive values and your reverse thrust levers only do the negative values.

proud raven
#

Hi Jaime, yes pots for reversers are separate to the throttle pots.

brave hamlet
#

What is the min and max potentiometer reading you get from the reverse levers in the Mobiflight log?

proud raven
#

Hi Jaime , This the log readout for the thrust reverser. 04/28/2024 09:42:55(423): Throttle Quad => Reverser 1 => CHANGE => 664 => Config not executed, MobiFlight not running
04/28/2024 09:42:58(474): Throttle Quad => Reverser 1 => CHANGE => 682 => Config not executed, MobiFlight not running
04/28/2024 09:42:58(624): Throttle Quad => Reverser 1 => CHANGE => 699 => Config not executed, MobiFlight not running
04/28/2024 09:42:58(824): Throttle Quad => Reverser 1 => CHANGE => 716 => Config not executed, MobiFlight not running
04/28/2024 09:42:58(975): Throttle Quad => Reverser 1 => CHANGE => 739 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(74): Throttle Quad => Reverser 1 => CHANGE => 766 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(124): Throttle Quad => Reverser 1 => CHANGE => 785 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(175): Throttle Quad => Reverser 1 => CHANGE => 813 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(224): Throttle Quad => Reverser 1 => CHANGE => 837 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(325): Throttle Quad => Reverser 1 => CHANGE => 854 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(476): Throttle Quad => Reverser 1 => CHANGE => 880 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(526): Throttle Quad => Reverser 1 => CHANGE => 900 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(575): Throttle Quad => Reverser 1 => CHANGE => 934 => Config not executed, MobiFlight not running
04/28/2024 09:42:59(625): Throttle Quad => Reverser 1 => CHANGE => 968 => Config not executed, MobiFlight not running

brave hamlet
#

664 is the min? 968 is the max?

proud raven
#

Hi jaime, yes thats the readings I get from Mobiflight log

brave hamlet
proud raven
#

Thanks Jaime I will give it a try. I also posted something about the flap lever too, Could you have a look at that for me too please 🙂

proud raven
#

Hi Jaime, that works perfect 🙂