#What LED Status is this

1 messages · Page 1 of 1 (latest)

arctic sapphire
#

hey, it’s a long story actually

i made a post on r/fpv quoting “I can’t get the controller to connect to the receiver”, prior to the post i actually managed to connect my controller to the receiver but during my testing smoke came out (it was the capacitor pin touching the frame) and ever since that it seem it doesn’t want to bind

so i got a support from a guy, telling to downgrade the firmware, try certain methods and stuff but eventually it leads to this - a led status that it isn’t on the expresslrs guide thingy

i suspect it’s bricked but i as well tried getting it in bootloader mode and it kinda of work but it goes back to the same led statis

silver atlas
arctic sapphire
silver atlas
#

I'd suggest reflashing via a uart adapter with erase before flash enabled.. and flash it with the CORRECT target.

if it's still behaving that way, the only explanation would be a hardware issue (either the voltage regulator or the rf chip itself)

arctic sapphire
#

alright, i’ll give that a try

arctic sapphire
silver atlas
arctic sapphire
#

but i can try other method

silver atlas
arctic sapphire
#

okay. what flashing method do i use then? (oops mb, will do)

arctic sapphire
silver atlas
shy notchBOT
silver atlas