#Binding Boxer 2.4 ELRS with DRB4 dual band RX

1 messages · Page 1 of 1 (latest)

smoky gazelle
#

Hi,
I just bought a drone with DRB4 dual band rx. Before purchasing the Nomad module, I would like to use my Boxer internal 2.4ghz RF module with the DRB4. ELRS website says it is doable like with a non dual band RX busing 2.4 link only. Looking at the ELRS script on my radio, I am 3.3.0 ISM2G4. My RX is set to EU868. I tried to bind both using Binding phrase but to no avail. My guess is that domain mismatch prevent the bind. How should I set the RX to match my radio. There is no ISM2G4 in the drop down menu on the web UI.
Thanks for help,
Best regards,

Pierre

tidal prawnBOT
languid matrix
#

because there are limited modes these devices can sync at

#

!lr1121

drowsy craterBOT
languid matrix
smoky gazelle
#

I am at 50hz

#

is there a difference between 50hz and 50 2.4G ?

languid matrix
#

can you put the TX and RX into wifi mode and post screenshots of their !webui banner, options and model tabs

drowsy craterBOT
#

Connect to your transmitter's or receiver's WiFi network to access the web UI:

smoky gazelle
#

Well, it is working now, I guess I needed to re-power the RX for the drone to bind. Both TX and RX are ISM2G4 and talking to each other now.
Thanks for help anyway 🙂

IMG_1824.jpg