hello everyone, For a new receiver that has not flash firmware before using esp8285, what files do I need to flash, bootloader.bin firmware.bin partitions.bin, or the firmware generated directly by pio ide?
#New elrs receiver flash firmware
north drift
worn gale
the generic target via platformIO should cover your needs, unless your hardware isn't using the base pinout from that target.
flashing via uart on a fresh chip is a must, and that will also prepare the flash partitiions
north drift
the generic target via platformIO should cover your needs, unless your hardware ...
Does this include the bootloader?
worn gale
Does this include the bootloader?
an esp chip has a secured/locked bootloader