#mobula 6 2024 binding issues

19 messages · Page 1 of 1 (latest)

stiff hedge
#

Hello! I am currently trying to bind the mobula 6 2024 that my friend got. I also have an elrs drone,the mobula 6 elrs. Binding with that worked, but the 2024 just isn't working.

We tried alot already, updating betaflight of the whoop to the newest version, updating controller (Radiomaster Pocket), reflashing betaflight on the whoop, setting the same binding phrase on both of them, and using the bind button in betaflight itself. Nothing worked so far.

The controller is currently at elrs version 3.3.0 and the whoop is at betaflight version 4.5.

quiet jackal
#

You have uart and elrs selected in receiver tab. I believe that's not a spi

stiff hedge
#

I had spi selected in the receiver tab not uart, because when uart was selected there wasnt a bind button. On my mobula 6 elrs just pressingthe bind button worked. I also should say, that the ELRS Led shows green heartbeat, nothing else

quiet jackal
#

Not totally sure but I believe they make both so you'll have to see which one. If it fast blinks after 30 seconds with radio off then you have wifi mode.

stiff hedge
quiet jackal
stiff hedge
quiet jackal
#

I believe I read somewhere the 3 plug method doesn't work if you enter a binding phrase unless you reflash bf fw and start fresh. There could be other ways to bind but I think that's true with the 3 plug. Maybe someone more knowledgeable with spi elrs can help

crimson frost
#

Reflash the receiver via Betaflight Passthrough

stiff hedge
crimson frost
#

Assuming it's the analog version

#

Like it says in the manual

stiff hedge
crimson frost
#

When you flashed Betaflight, did you flash the correct target? Did you restore your diff after flashing?

#

https://www.happymodel.cn/index.php/2024/02/24/mobula6-2024-1s-65mm-ultra-light-micro-fpv-whoop-bnf/

Happymodel
Jason
Mobula6 2024 1S 65mm ultra light micro FPV Whoop BNF

Features: AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx Super light 1S 65mm Brushless whoop only 17.7g Equipment with the lightest brushless motors-SE0702 only 1.46gram FX17-B 1/3 CMOS 800TVL Camera awesome footage Smooth and powerful Compatible for 1S Lipo/LIHV Specifications: Brand Name: Happymodel Item Name: Mobula6 ...

stiff hedge
crimson frost
#

Did you flash the correct Betaflight target? Take a clear photo of both sides of your FC.