Radio won't bind after i swapped my external module on my friends radio

[lyric solar]

could you put the receiver into wifi mode and post the screenshot from the webui options tab please..

also, does the lua script load on your radio with the module back into it?
which exact module was it? is it seated properly into the bay?

[crystal mica]

The lua script don't load sadly. Im at work rn but can take a photo later

[lyric solar]

could you please go through this guide and configure your radio PROPERLY?
https://www.expresslrs.org/quick-start/transmitters/tx-prep/

[crystal mica]

Yeah I've done all that now. But My Radio makes a wierd noise when the Module is plugged in. and Module is flashing red on the RM logo. and it gets kinda hot right under the power button (FrSky X9D plus)

[lyric solar]

the lua script still doesn't load?

what power level did you set the module to?

here's my suggestion:
Reflash the tx module via uart/usb with the option "Erase Before Flash" enabled. This will reset it to default settings

https://www.expresslrs.org/quick-start/transmitters/rm-ranger/#via-uart

[crystal mica]

There. Just had to set it to 115K Baudrate

[lyric solar]

also: https://www.expresslrs.org/hardware/x9d-troubleshooting/