Hello Guys
I bricked my erls receiver from iflight. When i try to flash it with bootloader mode this Appears. Can anyone help me pls.
#Bricked it but cant connect to it anymore
ashen bramble
inner kelp
Are you following the !recovery flash procedure?
dire coyoteBOT
Follow these steps to recover a bricked RX:
- Move the 5v wire going to the receiver to a 5V pad that only powers on when a LiPo is connected
- Disable Telemetry in Betaflight
- Save and Reboot
- Close Betaflight Configurator and unplug USB and LiPo
- Bridge the boot pads or hold down the boot button on the receiver
- Plug in USB
- Click "Flash" in the ExpressLRS Configurator, after selecting via Betaflight Passthrough method
- Wait for the line PASSTHROUGH DONE to appear
- Plug in LiPo (with boot button held down/bridged)
- Wait for the process to finish (with success hopefully)
- Unplug everything, unbridge the boot pads, then power on to confirm the LED blinks, and then goes into WiFi mode
Video Tutorial: https://www.youtube.com/watch?v=jYLwaWBkM_A
ashen bramble
Jep does Not work
inner kelp
Does the receiver power on when you plug in USB, or only if your plug in a lipo?
ashen bramble
Does the receiver power on when you plug in USB, or only if your plug in a lipo?
I Made a mistake now it worked thank you very very much you made my day
ashen bramble
I got another problem……
My transmitter is bind with my receiver but in betaflight i cant control the drone my receifer blinking 3 times in a row, pause, 3 times in a row.
