#Stick Inputs in BetaFlight

13 messages · Page 1 of 1 (latest)

remote merlin
#

Hey, I'm having trouble getting stick inputs to show up in Betaflight.
My Rx and Tx are bound (Light on RX turns solid, TX shows connection) and model match is enabled.
The TX is detecting 12 telemetry sensors.
FC: Mamba F722 Mk1
TX: Tarantis X7S (Access) running EdgeTx with HappyModel ES24 2.4Ghz external RF
RX: BetaFPV 2.4Ghz Nano
I double checked the wiring (Receiver RX connected to TX of FC, Receiver TX connected to RX of FC)
I also tried diffierent UARTs (UARTs 1 and 2).
Betaflight is configured as per https://www.expresslrs.org/quick-start/receivers/configuring-fc/
Any ideas on what else I could try?

Configure your Flight Controller for ExpressLRS with the help of this guide.

limpid comet
#

put receiver into wifi mode and post a screenshot of the webUI options tab

remote merlin
limpid comet
#

your receiver should be flashed with the BetaFPV Nano target..

remote merlin
#

these were my settings, is that the correct target?

limpid comet
remote merlin
limpid comet
remote merlin
#

Well, that explains it haha

limpid comet
remote merlin
#

thank you ❤️