#Need binding help

1 messages · Page 1 of 1 (latest)

slate mesa
#

Custom build, Foxeer F722 v4 mini FC, Foxeer 2.4GHz LNA on v3.2.1, RM TX12 MkII on v3.2.0. Was previously bound and working.

weary reef
slate mesa
weary reef
# slate mesa

can you remove the text in the binding phrase field for the TX please.. so I can see the actual UID that's on the tx

slate mesa
#

Okay, one sec please

weary reef
#

asking about the TX

slate mesa
#

Nuts. You

weary reef
#

Me?

slate mesa
#

're right, of course. Another moment...

#

I'd swear I've flashed the Rx with my binding phrase

weary reef
# slate mesa

as you can see, the UID that's saved into the tx is not the same as that of the RX

slate mesa
#

I see now they don't match

weary reef
#

type in your binding phrase as before, but this time, click the save and reboot button at the bottom.. take the receiver off wifi mode by rebooting it and see whether they bind now

slate mesa
#

I've been following the guide on the ELRS site, at least I thought I was

#

Pretty sure I've done that at least once, but I'll try again now

#

Gotta wait a minute for WiFi, of course... brb

weary reef
#

also, you're using spaces on the binding phrase?

#

if they still won't bind, choose an alphanumeric, no symbols, no spaces, binding phrase

slate mesa
#

Didn't work after just the reboot. Trying again after a power cycle.

#

If I change the phrase, what will I do with my other quads that are on that phrase?

weary reef
slate mesa
#

I checked one a couple hours ago. It connected, armed, etc

weary reef
#

do they have the same phrase as this rx?

#
  1. use the binding phrase that's already working on your devices to this particular receiver in question
  2. change the binding phrase to all your devices

that's your options

slate mesa
#

Yep. Just tried one of them and it worked

weary reef
#

clearly, per the UID numbers, this receiver's binding phrase is not the same as the others..

slate mesa
#

The one I just checked is an SPI. I need to check the binding phrase as shown in BetaFlight, right?

weary reef
#

or via the CLI through get expresslrs_uid

slate mesa
#

Okay, I just copied the phrase from BF with the working quad plugged in. Going to paste that to the WebUI for the problem one.

weary reef
#

that won't work

#

the UID field is Read Only

slate mesa
#

I copied the phrase text

#

Must have been some odd character in the auto fill I was using. It's bound now, but won't arm.

weary reef
slate mesa
#

Checking...

#

Yes. I also had to set up the arm mode just now.

weary reef
slate mesa
#

Yes. The main issue I came here for was the binding, though.

#

Fixed now. You're amazing, as always.

#

Thank you. I'll try to remember these steps for next time so I don't have to bother you. At least it was super easy for you.

weary reef
#

I don't really mind..

if I do, I won't be around

slate mesa
#

Do I get to rate you, because you'll get 5 stars