bold plinth
Hi, I'm trying to following a guide updating my Zorro and RP3 that i received today. Im at that stage where i wan't to Enable the WiFi on my Zorro, so it will appear as a hotspot. But when it says "Wifi Running", no new networks is found on either my laptop or mobile phone. Any Idea what might be causing this?
Zorro: v2.8.4
elrsv3.lua
build: RadioMaster_Zorro_2400_TX-3.2.1
jolly quartz
Hi, I'm trying to following a guide updating my Zorro and RP3 that i received to...
in any point in time, did you supplied/set wifi SSID and Password?
bold plinth
i did not set a ssid\pw at the configuratior
bold plinth
Hi, ok so just had to read through the document again and what you mean by webUI. From my understanding this is what you get when you enable the wifi on the TX. So basically that is my problem, i don't have had this to work before and believe i just bind manually earlier. Now i want to try this but don't get it to work.
jolly quartz
are your devices capable to connecting to 2.4GHz networks?
is it only the TX that won't show up?
does the RP3 wifi access point show up and you can connect to it and update it?
here's the flashing guide for the Zorro
https://www.expresslrs.org/quick-start/transmitters/rm-internal/
aside from wifi, there's via ETX Passthrough flashing/updating method..
Here's for the RP3
https://www.expresslrs.org/quick-start/receivers/radiomaster-rp-2400/
there's via WiFi, via UART Adapter and via Passthrough
bold plinth
yeah the EP1 show up atleast, but haven't tried the RP3.
thanks for the links, i'¨ll check them out
jolly quartz
so you have an EP1 as well?
