Meteor75 2022 Serial ELRS 2.4 / LiteRadio 3 Controller bind help | ExpressLRS Community | Page 1

broken rapids Jan 31, 2023, 2:35 AM

#

The Lite Radio 3 non-pro can only go up to 2.0.1 ExpressLRS

since you flashed your serial receiver to 3.2.0, they aren't compatible.
reflash the serial receiver on the whoop to 2.5.1, with the same binding phrase (if you used one) as the others.

sharp forum Jan 31, 2023, 2:38 AM

#

broken rapids The Lite Radio 3 non-pro can only go up to 2.0.1 ExpressLRS since you flashed y...

Got it, thank you! I'll do that

#

broken rapids Jan 31, 2023, 2:43 AM

#

sharp forum

flash it via wifi

sharp forum Jan 31, 2023, 2:49 AM

#

I have no clue what I'm doing, do I switch to ExpressLRS RX wifi? I did something like this before and inputted it's pwd: expresslrs then I go to 10.0.0.1, what do I do then there?

broken rapids Jan 31, 2023, 2:49 AM

#

sharp forum I have no clue what I'm doing, do I switch to ExpressLRS RX wifi? I did somethin...

Here's the Flashing Guide:
https://www.expresslrs.org/3.0/quick-start/receivers/betafpv2400/

BetaFPV Lite & Nano 2.4GHz - ExpressLRS

ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency. Vast support of hardware in both 900 MHz and 2.4 GHz frequencies.

#

Method 1 if you didn't set a wifi ssid and password
Method 2 if you did set up wifi ssid and password

#

you can uninstall the Configurator v1.5.5, and install an older version (v1.5.3) and try via Passthrough

sharp forum Jan 31, 2023, 3:27 AM

#

I went with the Passthrough and installed v1.5.3

#Meteor75 2022 Serial ELRS 2.4 / LiteRadio 3 Controller bind help