Hello All , I cant bind my Meteor65 ELRS to a Zorro ELRS , I'll appreciate any help to understand how to bind them , what version of ELRS should I use on each , and if I have to use betaflight-configurator 10.8.0 to update the firmware on the Meteor65, witch target and version should I use .
#Cant bind ELRS 3
frigid pilot
dapper hamlet
what firmware version is on the Zorro elrs?
if Zorro is already on 3.0, then you need a nightly Betaflight build for the metor 65
frigid pilot
the zorro is in ELRS 3.0
Thank you deadbyte, I'm not sure wat target should I chose I just flashed this
dapper hamlet
Thank you deadbyte, I'm not sure wat target should I chose I just flashed this
the photo I posted already has the right target
frigid pilot
ok thank you I'll change that
dapper hamlet
I got this message
IF you have the betafpv meteor 65 with the ExpressLRS SPI then yes, betaFPVf4SX1280 is the right target for it
dapper hamlet
this motor protocol error is because you haven't set up the right motor protocol (dshot 300) in the motors tab..
if you saved your diff all dump, you can easily put parts of it into the CLI tab, type save and apply them back into the flight controller
dapper hamlet
!spi
visual fossilBOT
https://www.expresslrs.org/3.0/hardware/spi-receivers/
Flight controllers with built-in ELRS SPI receivers are not flashed using ELRS Configurator, the ELRS firmware is "baked in" to Betaflight. Thus to update your ELRS firmware, you'll need to flash the latest version of Betaflight for your FC. Betaflight 4.3.x is compatible with ELRS v2.x.x, and Betaflight 4.4.x is compatible with ELRS v3.x.x.
To set a binding phrase on a SPI receiver, enter it here and paste the resulting code in the Betaflight CLI: https://www.expresslrs.org/3.0/hardware/spi-receivers/#binding-phrase
