help-and-support-forums
Unable to update Frsky R9mini - - SOLVED! - -
accidentally reset my vision40 in betaflight and now there's no motor output protocol?? please pleas
x9d Plus 115200 baud and 150hz
Hardware
Binding Walkthrough
Hardware
Binding
Software
Translate data from RC into MavLink + SBUS
Hardware
Software
broken ceramic antenna
Hardware
Unable to bind when connected to FC
INAV
Hardware
Software
telemetry loss
Target Mismatch Firmware Update
binding issue
Receiver firmware update problems
Flashing/Updating
Connection Issues
bootloader
BetaFpv HX115LR showing 0% on goggles
elrs rx connect to tx but in tx signal is not shown
bad channel 12?
elrs blink solid light
Is betafpv superd or some other elrs rx operate at 3.3V logic level?
TX12 ELRS Stuck Loading
SPI RX Hardware issue
Hardware
Binding
Betaflight
Flashing/Updating
fitting elrs to babyhawk r with sbus and no spare uart
Lua script stuck on loading
Happymodel EP1 bricked
Bad Range at 100mW 250hz?
one channel is acting like a switch
Elrs indicates rx and tx bound but no reponse from tx sticks or switches in betaflight? help
Intermittent arming issue (T Pro, ELRS 3) and model mismatch
Flashing binding phrase
trouble flashing zorro internal elrs
Module not communicating with radio
wifi binding ep1 doesn't work
PPM receivers: telemetry module
I forgot what my binding phrase is and it was not save on the configurator
form for @GGmanic
Video Range help needed
Error Connecting (UART, Jumper T Pro,
true diversity rx with normal tx
Low power (pit mode) when trying to bind?
connected symbol has disappeared
No Bind after Successful flashing
RSSI dbm problem - very short range
Errors trying to Flash Happymodel 2.4g Slim Pro
cant update boxer from 3.3.0
Software
Updating SIYI FM30 TX with ELRS 3.3.1 problem
can't update the tx
hdzero elrs backpack headtracker
HappyModel EP1 cannot flash
Support with switching to 3.0
EP1 Dual TCX0 flash issue
Meteor85 RX flashing issue