help-and-support-forums
how to flash BAYCK ExpressLRS 915MHz Nanoto 3.3.1
RM Bandit Micro TX changes power with Dyn OFF?
General
Hardware
Jumper t lite and external Tx module
trouble trying to update this receiver, can someone help me out
Radiomaster Boxer "Connected" to RP3 receiver but no radio inputs detected (in mission planner)
Binding
Cant open ExpressLRS Lua Script jumper t-lite v2
flashing of Jumper AION RX Nano not successfull
Flashing/Updating
Radiomaster Boxer is not starting up
finetunig of rf frequency?
ExpressLRS commands not appearing in betaflight
elrs not picking up in beta flight
Trouble binding RTF Mobula6 ELRS to Radiomaster Boxer
Radiomaster tx12 mk II erls bind with RX but don't work on betaflight
Should I reflash the drone or are there other options?
Problem building elrs 2.5.2 for radiomaster zoro
Motor Problem
General
ELRS reciever stuck in bootloader mode?
Software
Flashing/Updating
cant get the Darwin 240 Johnny 5 elrs to bind with jumper t lite v2 elrs
Binding
Flashing/Updating
telemetry lost telemetry recoverd audible messages
ELRS, multiple Tx, multiple drones, same binding phrase, flying simultaneously?
Error while trying to downgrade to ELRS v.2
Flashing/Updating
Can't get BNF tiny whoop to bind
Hardware
Binding
Stuck in bootloader mode Radiomaster RP1 receiver.
No telemetry when flying
BETAFPV F4 1S cross AIO ver 2.1 receiver firmware update problem
Hardware
Software
Will this work?
Cross F4 smartaudio
Cyclone 7CH PWM Rx update fw by UART stop on "Connecting" status
How to charge my first ever lipo lol
Problem with my jumper T-Lite v2 elrs
Software
Flashing/Updating
HappyModel Cross F4
Initialization of communication "TX module - handset"
Software
Update via Passthrough not possible because port not detected
Packet Rate 50, 150, 500 difference
send data through an ELRS Micro TX Module with the pc
Wifi issue
airport with two Rx ?
Binding by comport not working
Binding
Hardware
Software
Happymodel 2.4GHz EP1 Flash Issue
radio and receiver bind when plugged into comp but nothing when battery plugged in.
I suddenly encountered such a problem with the Betafpv Meteor75 model. What's the solution? Can you
Mobula 8 > Radiomaster Boxer
F3 Whoop with only an SBUS pad, no telemetry
is LBT receiving working with normal radio?
31.25mm antenna strain relief (X12 board)
Meteor65 Pro failsafes during flight
RadioMaster RP4TD, what are the pin numbers for R and T pads?
Mobula 8 stuck in Bootloader Mode and will not connect to WIFI.
Hardware
Binding
Software
Flashing/Updating
ELRS Flash help (BNF Nazgul Evoque F5 V2)
Binding
Flashing/Updating
1 betafpv lite rx wont flash even when forced into recovery mode, the other is in bootloader mode