snow mauve
Yeah I'm getting a mess going on for some reason. I just upgraded a fan and put a beacon on and now I'm getting errors all over the place.
I commented the pin for the fan to !PD15 cuz apparently J55 doesn't work.
Then the 4-pin fans part cooling is declared "not a valid pin name" after I just commented the line.
Uncommenting the line gives the first error but there's no updates available in the update manager.
Config included, I have no idea what's going on. I really need to get it fixed.
fading vine
https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/blob/master/Hardware/BIGTREETECH Octopus - PIN.pdf
J55 is the whole port, you want PD15 because that is the name of the pin that is controlled
also line 159 - [include RatOS/4pin-fans/part-cooling-fan-25khz.cfg] is wrong, there are no 4-pin ports on the octopus 1.1
snow mauve
oh gotcha. Thank you.
PD15 did help the setup but it also caused the "recompile the firmware" to show up so i guess that's the underlying issue
snow mauve
https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/blob/master/Hardware/BIG...
Well, either way I do gotta reinstall the firmware apparently.
Do I still gotta unplug everything from the octopus to do that?
snow mauve
Sorry I'm just really frustrated with this thing. The only major parts I added were the beacon and the 4028 but apparently that was just too much for a simple part swap and some klipper editing. A friend wanted to buy it and I keep getting delayed cuz of one thing after another.
fading vine
Well, either way I do gotta reinstall the firmware apparently.
Do I still gotta...
how did you install the firmware originally? ratos should automatically flash the new firmware
snow mauve
micro SD card in the octopus with the firmware in it, wait a bit, take microSD card out.
fading vine
and that was the firmware from ratos, or somewhere else?
snow mauve
From RatOS, yes.
fading vine
paste the error you are getting
snow mauve
fading vine
so me the status of your machine that lists all the versions and if there are any updates
it should be under the machine tab if I remember correctly
snow mauve
I ran every update available.
fading vine
but it is saying your klipper is dirty, did you modify any files?
fading vine
what do those info icons say next to klipper and moonraker?
snow mauve
Repo has untracked source files: ['klippy/extras/beacon.py', 'klippy/extras/gcode_shell_command.py', 'klippy/extras/linear_movement_vibrations.py', 'klippy/extras/ratos_homing.py']
Repo has untracked source files: ['moonraker/components/timelapse.py']
and fan is still going full blast atm
fading vine
did you manually install beacon?
snow mauve
did you manually install beacon?
No.
fading vine
and fan is still going full blast atm
yes, that is normal.
anytime the MCU goes into this state it turns the PWM signal off. These fans are set to go to 100 when it doesn't receive a PWM signal
fading vine
Do you have another SD card for your PI? You could try moving to 2.1 which has much better support for beacon
if that fails, you still have this SD card
snow mauve
Yeah I just bought one to re-flash the firmware and OS.
So the new versions don't need to have the firmware flashed directly on the octopus anymore? All done from the pi?
fading vine
So the new versions don't need to have the firmware flashed directly on the octo...
no, you will always need to flash firmware when there is an update, that is how klipper works
But ratos knows how to automatically flash it via the USB cable
snow mauve
yeah that's what I meant. Cuz before you had to flash it directly via a microSD on the octopus before installing ratOS on the pi.
fading vine
that is only the first time - that is with any board, you first have to flash klipper on it instead of whatever came with the board
snow mauve
Ahhhh
fading vine
the error you are getting are saying the firmware you flashed and the version of klipper you are currently running don't match
snow mauve
the error you are getting are saying the firmware you flashed and the version of...
Okay, configuring things now and it's going a lot smoother.
Quesiton tho: I have a Rapido 2F UHF hotend. Do I want to label it as a Rapido Plus UHF or Rapido UHF?
Okay. Reinstalled the OS with a new microSD and re-flashed the firmware, it said it was good.
Still got this error.
