Printer Hardware Missing from Configurator Setup Wizard

[indigo pine]

Hey all,

Is there a reason I'm no longer able to select my hardware in the RatOS Configurator Setup Wizard?

I'm just trying to change my nozzle size back from a 0.2 to a 0.4mm. This is something I've done dozens of times before, but the printer hardware is no longer showing up in the Configurator.

I've already run ratos doctor via SSH, this hasn't worked. Debug.zip is attached below.

Screenshot:

[vocal crystal]

To help others find answers, you can mark your question as solved via Right click solution message -> Apps -> ✅ Mark Solution

[indigo pine]

@plush ermine sorry for the ping, but is this something you would know the answer to?

Can also confirm that attempting to start the Configurator process again from the Select Your Printer stage doesn't work

[plush ermine]

You have to select another printer, then reselect your original printer and make sure to click “start fresh”. Somehow the data in moonraker got corrupted.

[indigo pine]

Ahhh, thank you, I'll give that a try

Is there anything I should backup before doing that?

[gray fulcrum]

Nothing more than the printer.cfg which is already contained within the ratos-debug file

[indigo pine]

Just confirming this worked, thank you both @plush ermine @gray fulcrum

Will mark it off as solved

[vocal crystal]

Thank you for marking this question as solved!

Learn more

https://answeroverflow.com

[indigo pine]

Ok I spoke too soon on this

There's something really weird going on with the Configurator now

I didn't notice when I redid the config yesterday, but now today I'm having issues with the printer when homing

And when I re-check the Configurator settings, I see it is outputting weird things like this

What does EBB42 v1.2false mean? And why is it setting the Y Endstop to an Octopus V1.1 F446 when it knows it's using an Octopus Pro V1.1 H723?

@plush ermine @gray fulcrum I don't suppose you've seen this before too?

[plush ermine]

That’s cosmetic, nothing to worry about, it happens if the endstops are set before you chsnge the board, IIRC, it’s only for display purposes, the value doesn’t actually have the name in it.

[indigo pine]

Thanks Mikl

So the Y endstop being labelled for a Octopus V1.1 F446 doesn't mean RatOS will assign it to a different pin?

[plush ermine]

No 🙂