#First layer extruder temp error

30 messages · Page 1 of 1 (latest)

crystal garnet
#

I'm still getting this error when I try to start the first layer print:

First I see that the T0 extruder is correctly waiting until the temp is right for probing.
12:38 PM
RatOS | TEMPERATURE_WAIT: Waiting for sensor: extruder, MINIMUM: 150, MAXIMUM: 155
12:38 PM
RatOS: Heating extruder to probing temperature...

But then it reports this after homing:
12:39 PM
RatOS | TEMPERATURE_WAIT: Waiting for sensor: extruder, MINIMUM: 0, MAXIMUM: 5
12:39 PM
RatOS: Heating Extruder...

I am up to date on the printer and this is with the latest PrusaSlicer 2.9.0

untold perchBOT
#

To help others find answers, you can mark your question as solved via Right click solution message -> Apps -> ✅ Mark Solution

lilac sky
#

please share the debug.zip file

#

the gcode file

#

before sharing the debug.zip file please run ENABLE_DEBUG and reproduce the error

crystal garnet
#

Enable debug from the console?

#

Running now

lilac sky
crystal garnet
#

The printer basically hangs when it hits the second temperature wait message. If I cancel the print I have to restart the machine.

lilac sky
#

understand

#

i can have a look once i have all demanded files

#

also make sure to update everything

crystal garnet
crystal garnet
#

I don't see a debug.zip file

lilac sky
crystal garnet
#

It also looks like it isn't heating the bed. I had to manually set it to 60c.
Rerunning the print again.

lilac sky
#

please share also screenshot of your updates

crystal garnet
lilac sky
#

will have a look tomorrow, will ping you then

crystal garnet
#

No worries. Have a good evening!

lilac sky
#

your slicer config is wrong

#

you have made it into multiple lines

#

this is supposed to be one line

#

i recommend you copy and paste it directly from our doc website and enter it into the fields in your slicer

#

after that it will work

#

@crystal garnet this