having all sorts of issues

[bronze laurel]

i didnt have issues yesterday., now today, prints arent sticking. i did the popcan under the x gantry to level it, and my mesh is still messed up.

[whole shuttle]

looks like you haven't done a z-tilt

[bronze laurel]

A what?

[whole shuttle]

https://www.klipper3d.org/G-Codes.html#z_tilt_adjust

[bronze laurel]

@whole shuttle and this is for problem meshes?

[whole shuttle]

you clearly have a flat plan that is tilted, that tells me you didn't do a z-tilt.
You need to do:

• home all
• z-tilt
• bed mesh

[bronze laurel]

Do I need to add a z tilt adjust config file?

[whole shuttle]

not if you are using RatOS

[bronze laurel]

okay so in the command line i type.. ?

*console

I found this on Reddit too. https://www.reddit.com/r/3Dprinting/comments/111gro8/height_map_problems_i_used_a_pinda_then_switched/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

[whole shuttle]

something like

G28
Z_TILT_ADJUST
G28 Z
BED_MESH_CALIBRATE PROFILE='ratos'

this is from looking at https://github.com/Rat-OS/RatOS-configuration/blob/v2.x/macros.cfg#L355

[bronze laurel]

g28 z_tilt_adjust did nothing

[bronze laurel]

@whole shuttle

[whole shuttle]

Define "did nothing"? it should either execute the gcode or give you an error