fix-my-printer
Unable to access Configurator
Solved
setup
4028 fan not working
setup
Strange noise when moving T0 in X
motion
Beacon Z-Offset woes
motion
other
Layer shifts/clunking after 3.2H upgrade
motion
SAVE A SOUL and help me make sense of this!
setup
Configuration issues
setup
Ratrig V-Core 4 IDEX 500 error
motion
other
Extruder error
Solved
Strange non straight parallel lines while printing
Solved
other
unsatisfied with my V-Minion print quality (VFA, ringing, z inconsitencies)
motion
Fix layer shift
motion
Belt tension graph not sure how to proceed.
motion
BTT SKRat V1.0 V-minion X and Y endstops will not trigger.
setup
"No Beacon model loaded" after attempting to run "BEACON_INITIAL_CALIBRATION"
Solved
setup
MCU SHUTDOWN: stepper too far in past. only on pause resumes
motion
Solved
IDEX Toolheads offset in X
other
setup
Orbiter motor skipping steps
motion
other
setup
Z_TILT_ADJUST
motion
Layer shifts destroying perfect prints
other
ADC out of range
setup
"Endstop y still triggered after retract" when running "BEACON_INITIAL_CALIBRATION"
setup
Control board flashing
setup
IDEX 500 erroring when going to print from second toolhead
other
Beacon poke test failed on BEACON_RATOS_CALIBRATE
setup
Belt tension/Belt slipping
motion
Solved
Suddenly heater bed not heating at expected rate while printing, log shows no abnormalities
other
Auto temperature soak
setup
Vcore4 no UI, only ssh
other
EBB42 v1.2 SuperPINDA (z probe) Always Triggered
Solved
setup
Printer stopped responding, UI won't open
other
TEMPERATURE_WAIT
setup
When I connect the printer display I cannot connect to printer with LAN
Solved
other
setup
Partcooling Fans on IDEX both 100% all time
other
Sudden Issue: bed not heating at expected rate anymore - V-CORE 4
Solved
other
setup
No Extrusion
other
VAOC camera not working
Solved
setup
Error Message
setup
Layer Shift V Core 4 500
motion
setup
Squaring the gantry
motion
Can't get printer to print more objects at once
motion
Only changes to RatOS make changes.
setup
How can i override a ratos variable for different adxl_chips?
Solved
setup
Vc4 layer seperation and heavy stringing
other
Part Cooling fan doesn't work any more
other
layershifts and not able to run performance mode without warnings
motion
other
Initial Z-Tilt is failing. New Build
motion
setup
No trigger on x after full movement - x carriage only seems to have problems during homing.
motion
Solved
abs(): 'Undefined' Error
setup
LED Light Strips
setup