fix-my-printer
Error sensorless homing Ratos 2.1
Solved
setup
vcore 3.1 z-tilt issue
motion
Solved
setup
Y axis jamming when moving rapidly
motion
Heater extruder not heating at expected
other
Having issues with bed mesh - using beacon.
motion
my RPI Cam doesnt work
setup
Super Power motors on 5160 Pro's 48V
motion
Solved
Rapido V2 with 104NT smoking and Generally overheating, EBB36
setup
Heater_Bed Not Heating at expected rate
other
Dua 5015's always running - but not in the interface
Solved
other
Option 'pin' in section 'probe' must be specified - after update
setup
Extruder reset error only after 3+ hours of printing
Solved
other
Temp reading is wrong?
other
Filament break between hotend and extruder when unloading filament
Solved
other
accelerometer help
setup
fans staying constantly on
setup
vcore3.1
setup
4028 Fan inverted control
Solved
Setting up USB Camera
setup
VCore 3.1 random klipper error
other
VC3.1 500 upgrade. Rear bed z drops when unpowered.
Solved
other
MCU Not connecting. Klipper Log provided. After swapping from Octopus V1.1 to Pro h723 V1.1
Solved
setup
I updated my system before evey thing was working fine
setup
Best way to remove RTV glue from keenovo heater pad?
Solved
other
setup
Beacon revH - bed mesh hangs klipper/mainsail
other
LDO-36STH20-1004AHG (XH) getting hot
Solved
setup
complete noob with RatOs, Octopus PRO, EBB36 V1.2 and only problems.
setup
LGX Lite first test - TMC 'extruder' reports error
other
Beacon (Again)
Solved
setup
Raspberry pad 5 - black screen CM4
other
setup
V-Core 3 - Octopus 1.1 and RPi connection issue - 'mcu': Unable to connect
Solved
other
setup
Can't install firmware on new board
setup
possible the latest updates borked Z Pinda detection?
motion
Strange smell after enabling performance mode on steppers
other
Klipper fails after hard Recovery
Solved
setup
parts cooling fan is going on and off during print.
Solved
other
Clicking noise on x/y axis travel
Solved
other
Extruder temperature is going crazy.
other
setup
Front right Z motor not working
motion
Bed not heating
setup
Y motor seems to be losing torque on X moves
motion
Solved
Part Fan works in dashboard but not during prints
other
Prints often fail at this Z height
motion
arsnevada
motion
I need correct pinout for 1st gen (old, original) X/Y endstops for v-Core 3 and Octopus Pro 442
Solved
setup
V-MiniON bed heater - strange behavior
other
at a loss with Ratos configuration wizard
setup
layer shift on newly assembled printer
other
First longer print attempted, printer stops after 1 hour
Solved
other
Extruder skipping, extruder motor overheating?
other
setup