ratos-support
Upgrade while keeping history link?
Solved
Configuration
v0.11.0-201-g37315bf3 prints prime blob off plate
Other
Default printer.cfg ADXL default.
Configuration
Save config error when setting position endstop offset
Errors
Configuration
Lost Extruder Temperature Control after latest RATOS update during PrimeBlob
Errors
Bed Heating Problem when starting print
Errors
Rpi touchscreen blank with backlight on after bootup
Errors
ratos adaptive bed mesh not working with cura
Configuration
errors since using ratos adaptive mesh
Configuration
Klipper install dirty after update of ratos and klipper
Solved
Other
Octopus not recognised
Solved
Configuration
Native RatOS Adaptive Bed Mesh hits the bed in prime location
Macros
Motion
PAM: Klipper shutdown on prints which use the full bed
Errors
PAM- Adaptive Priming Fails
Errors
ratos 5160pro
Solved
Errors
Configuration
Can variable_bed_mesh_profile be set in the slicer?
Macros
Configuration
Customization
No Wlan connection when HDMI Display is connected
Configuration
Unable to overwrite Octopus ADXL config
Errors
mcu issues (solved) + psu no voltage
Solved
Errors
4028 fan on sht36 v1 toolboard not controllable
Solved
Configuration
RatOS on a Prusa MK3S+
Solved
Configuration
Boards
Mainsail Dashboard change in ratos v2
Solved
Customization
Klicky Probe gets attached but then Error occurs
Errors
Configuration
Flashing of SHT36 Toolboard does not finish
Solved
Errors
Wifi special characters
Solved
Errors
z-tilt going wrong
Solved
Motion
thermistor reading stuck at 159C I am using a rapido plus hotend.
Solved
Configuration
"Disable Extruder Heater" occurs mid print
Errors
Other
Is the Fly-Adxl345 (RP2040-based USB board) supported?
Boards
prime line not done properly
Solved
Configuration
Hotenend Thermistor only recognized when on Main MCU not when on Toolboard
Solved
Errors
Configuration
Random klipper restart
Errors
OK...what did I miss? (latest updates)
Configuration
Motion
Z Axis wont stop at the top of lead screw when homing.
Configuration
ADC Out of Range error
Errors
Configuration
network issues
Configuration
Superpinda offsets not applied when homing Z
Errors
Configuration
Part cooling fan Delta 9030
Configuration
Customization
Boards
Problems with homing direction with sensorless homing
Solved
Configuration
Nidec 4028fan ON 100% always
Errors
Invalid adxl345 id (got ff vs e5).
Errors
Configuration
Primeline scrapes the bed
Macros
Configuration
Motion
PAM issues
Errors
RatOS all Invalid
Errors
pin ADC_TEMPERATURE used multiple times in config
Configuration
mcu not connecting
Errors
Configuration
rpi 3a+ ratos not hosting wifi
Errors
TMC5160 PRO + Octopus 1.1 @24V Sensorless homing not working
Solved
Macros
Configuration
Timelapse "enabler" does not show on start of print
Configuration
Graphs
Configuration
Customization