ratos-support
crowsnest issues? logs says all ok...but then fails
Configuration
Customization
Other
Pin 'z_step_pin' is not a valid pin name on mcu 'mcu' (Prusa Mini)
Errors
Trying to setup ratos2.0 but stuck at the screen
Solved
Errors
Update to moonraker breaks ratosv2 configurator update.
Errors
Transition to shutdown state: MCU 'mcu' shutdown: Timer too close
Errors
"Layer 0 of 0"
Solved
Other
klicky probe drawings reversed??
Macros
Configuration
Customization
should homing be using offsets like z_tilt?
Motion
hotend not heating
Solved
Errors
Configuration
Other
y home in the wrong direction
Configuration
Motion
bltouch not showing up as probe in endstops
Configuration
Customization
Can't get Orbiter filament sensor v2.2 to work properly
Configuration
Z probe always triggered
Configuration
Customization
uart pin must be specified
Errors
Configuration
[Errno 13] Permission denied: 'eslint-patch'
Solved
Errors
problem with initial firmware install.
Errors
Boards
Boards are no longer listed in the Pi
Solved
Errors
Boards
Other
Moonraker can't connect to Klipper after updating
Errors
Pausing after Prime line
Solved
Macros
My RatOS dont connect to wifi
Other
Beacon Help
Solved
Macros
Configuration
Other
Adaptive Mesh # probe points
Configuration
Macros
Customization
Prime line/blob position control?
Configuration
Where do I set fan speed on startup? What about while printing?
Solved
Configuration
Connecting Fystec PIS on RatOS 2.
Solved
Errors
Configuration
Boards
Installed RatOS but can't flash the Octopus
Solved
Configuration
Boards
Z Homing + MK3s
Macros
500 Internal Server Error
Errors
Einsy bootloader
Errors
Boards
can’t upload anything
Errors
Manta m8p cb1 no wifi, ethernet or usb wifi connection.
Solved
Configuration
Boards
Octo v1.1 flashing - klipper not detected
Errors
Configuration
Boards
Having Problems With M600
Errors
Beacon leadscrew safe_home_x
Motion
Any way to access ratos macros without installing ratos?
Solved
Macros
Disable active LEDs on logitech C930e camera
Solved
Configuration
Other
smaller x/y min/max vs bed size for z-tilt
Errors
Configuration
Customization
Motion
Just updated RatOS and now usb web cam does not work
Configuration
adaptive Meshing
Solved
Macros
Configuration
Customization
Confused.
Motion
BTT 42 does not flash.
Configuration
Beacon constantly triggered
Errors
Configuration
Boards
Priming & Printing with .6 nozzle
Configuration
Motion
Option 'control_pin' in section 'bltouch' must be specified after installing inductive probe
Solved
Errors
Configuration
Customization
Error when trying to home
Macros
Motion
Static IP Configuration
Configuration
AWD TMC 5160 issue
Configuration
Customization
Motion
CAN w/ SKRat v1.0 and EBB36 v1.2
Solved
Customization
Modify position_min / position_max to avoid collision
Solved
Configuration
Motion
bad mesh
Configuration