ratos-support
Heater chamber_heater not supported
Solved
Macros
Configuration
Errors
Unable to see Realtime Stream from Beacon
Errors
Print Start shows a warning about incomplete Slicer configuration.
Configuration
Probe Samples Exceed Tolerance
Errors
Configuration
Error during accelerometer data streaming
Solved
Errors
Configuration
Printer Site Reference name
Macros
2.1 Installation stuck at ratos-configurator
Configuration
EBB42 flashing/setup via usb(data only) + 24v
Solved
Configuration
Boards
Default Filter Fans Speeds don't meet Ratrig Docs
Solved
Errors
Configuration
Pressure advance doesn't seem to get implemented
Configuration
Y-Stepper engages for X-Movement
Solved
Customization
Pi Camera on New RatOS
Solved
Configuration
"Must home Axis first" When trying to home after fresh 2.0.2 Install
Solved
Errors
Rat rig VAOC 3DO Webcam not working in visual calibration
Macros
Configuration
DC slammed on Homing after Set Kinetic Centre
Info
Motion
MCU 'Toolboard t0' shutdown: Timer too close.
Solved
Errors
Wrong skew profile tries to load
Solved
Errors
Configuration
Motion
YeagerBomb RatOs not saving Z-offset
Configuration
Motion
issues with vcore 4 500 PEI flex plate
Other
Pi has Problems to flash after reinstallation
Solved
Errors
Configuration
mcu 'beacon': Unable to connect
Solved
Configuration
GuessWhatsThisParlor Error
Errors
Configuration
NikoMan update issue
Solved
Errors
Configuration
toolhead variable_standby on print start T1 toolchange does not wait for T0
Errors
Macros
Print Fail during beacon calibration after update - bug?
Errors
How do i fix this?
Solved
Configuration
Warnings after updating and restarting
Errors
Other
RatOS missing from Software Updates
Solved
Configuration
RPICamv2 doesn't start as an VAOC cam.
Solved
Configuration
Customization
User Error
Solved
Configuration
Other
Notifications integration in RatOS >= v2.1 - telegram-bot, Pushover, MQTT?
Customization
Other
RatOS for Raspberry Pi5 ?
Solved
Customization
IDEX input shaper values not being set correctly
Solved
Macros
Configuration
Motion
My control interface stopped responding and simply exited the window!
Solved
Errors
pin PC4 used multiple times in config
Solved
Customization
Print stopping at lay 451 with move out of Range
Errors
No variable_adaptive_mesh in printer.cfg?
Configuration
Customization
Pin 'heater_bed_sensor_pin' is not a valid pin name on mcu 'mcu'
Customization
Configuration Bug Einsy
Customization
Boards
Nozzle expansion offset gets reset by an order of magnitude at the start of a print. VC4/500
Solved
Errors
Configuration
Other
Rat Pack
Solved
Configuration
Other
RATOS SSID keeps appearing after some time
Solved
Configuration
Prime blow messing nozzle
Macros
Customization
Move exceeds maximum extrusion (0.2mm nozzle)
Macros
Configuration
Errors
RatOS Core: Configurator & Configuration Error
Errors
Configuration
Overriding Pins
Macros
Customization
RatOS invalid recovery fails
Solved
Errors
Upgrade RatOS from 2.0 to 2.1
Configuration
Other
Override virtual_sdcard ? (Move gcodes folder somewhere else)
Configuration
BTT manta m8p IDEX compatible
Solved
Other