#programming
1 messages · Page 399 of 1
pure evil maybe

Pure 
I have decided QML is not de wae
only one quarter
her evil is performant and reluctant. not even 1/4
evilangelizer
answer is probably never, we need less tribalism not more
or better: enubic-enubs

But... but.... evil 
that's this channel 
shwo
when can we rename this channel to #baking
surely for evils birthday NN can become EE
ye, enub-enub
i argue that will decrease tribalism, as it will add people into a channel with people they might not otherwise be around. for a day.
people might get confused though about EE and start asking the questions about capacitance and what the peak voltage should be.
when they should do it here.
why not both
it's a lot easier to get better quality video with lower frame rate
this looks terrible at 60 with the same constraints
video is 5.8mib, rest is audio... I know, I failed getting it below 10.. I could if I reencoded.. but, meh
also, stop using h.264
I just briefly tested and it sucks.. I see a lot of people still using it when working with low file sizes >.> it's fine to use when there aren't strict file size constraints but really falls apart when there is..
13.2mib with h.264 🥲 and it looks terrible
no audio
@olive sable vmpv av://v4l2:/dev/video0 --profile=low-latency --untimed --player-operation-mode=pseudo-gui
@olive sable
That makes sense 

Must be pretty big system its embedded into
nVidia jetson moment
I think their AGX Thor could indeed reach 130W
Yeah, Thor Jetson T5000 is rated for 40-130W
if you wanna lose some braincells by reading something today
they probably need new glasses.
actually, who the hell streams videos online in 4k? most videos aren't even available in 4k. Home video is the only reasonable use for 4k anyways
1080p is good
documentaries look much better in 4k
I think 4k on phones is a gigantic waste of bandwidth same with any 4k streamed tbh
if you don't want 4k, turn your settings down.
I think they're not completely wrong
a friend helped me to make gass station neuro sama'nt
but
i have half a gigabit of internet and even then at most i'd only do 1440p
Streaming the highly compressed feed into 4k is silly
1080p or 720p would be better
what I can say is that I 480p is actually fine for certain things
LTT did at one point show cost breakdows for the 4k streaming
i just think that its absurd to compare network traffic energy usage to ai datacenters
and it was a bit silly
yeah
Streamed content is highly compressed that by definition destroy many of the 4k detail
144p like twitch goes to when you put it in the background is fine for podcasts... but only if you're not watching it.
also streaming is still hella profitable
av1 codec and 4500mb/s is enough
economically wise its good
see: "overton window". next they'll say "perhaps we should compromise. how about 1080p." and it will start to sound reasonable to limit stuff.
"video streaming takes up to 75% of traffic" doesn't equate well to "75% of energy usage"
i think regardless of 4k or 1080p streaming it wouldn't make any difference from energy usage wise.
like actually
infrastructures are already built, they're just constantly pulling in power regardless of load because they barely even take up any energy usage
there's a reason why most ethernet cables uses 26 awg
we also have fiber lol
maybe "4k video on the internet takes 75% of the motivational energy people have to go outside coz they're just watching it"?
how about instead, stop throwing cash on your whatever imaginary "ai is the future guys"
imagine how much easier it would be to train AI if you know all video in the internet is limited to 480p?
that doesn't make any sense either nor it makes the difference with 1080p because its an entirely different scope now
i guess i suck at humor.
grass
but it doesn't work that way 
2160p takes about 2 to 2.5x the bitrate of 1080p, as long as the encoder wasn't horrible
also, 1440p on yt is generally about 3x the bitrate of 1080p, that's just because yt absolutely butchers 1080p and below
grass
woohoo for "import _winapi"
_winapi.VirtualQuerySize() <= i think it's for finding out how tall Neuro and Evil are.
and pyside6 documentation on how it looks sucks. "dear pygui" seems much better.
bet you didn't expect this on a fitness channel.
✉️The LENNERT GAINZ newsletter: https://newsletter.lennertgainz.com
(I will automatically send you my FREE WORKOUT PROGRAM. as of the making of this video I have nothing paid to sell you.)
(You will be notified as soon as my WORKOUT GENERATOR releases. I will only release once I am really...
I'm not a programmer (at best I'm one of the best sql writers you can find) but I'm wondering how the incoming age verification on discord is going to affect neuro
Neuro is a bot account so I don't know why she would be affected
The opposite. Too little that it's borderline suspicious even if that's a reputable seller
What do you need uSD that size for anyway?
only reason I can think is maybe camera
overpriced
though also sus
if you bought it make sure to test the flash blocks to make sure that its not firmware manipulated
(even happens on listing with good reviews because people can be really easily tricked with firmware change that pretended to be really massive storage)
though i'd say tokopedia should be more trustworthy
just don't buy it on shopee that place is full of said scam
age verification only affects nsfw channels/servers and it doesn't affect bots, 100% not important
she'll have to be creative if she wants to see nsfw stuff. just like any other kid.
Not for long
Because of tiktok buyout
I've already encountered trash listing like "the souls of a man" and what not
This is one such listing 
ah
480p??!! what is this, 2005?
480p was a little extreme, I'd say 720p is the minimum for a desktop screen
sure, 480p on a phone screen might be fine
"dijual temen goblok tiap hari pushrank terus"
Rp 50,000
also 4k is not a "complete waste", you can actually benefit on it especially with a home theatre that has a big screen
no resolution is a waste
even my 27" screen heavily benefited from 4k >.>
regardless of your resolution the electricity usage is barely any noticably different
GenAI | Cloud
talk to me when you aren't responsible for it
I suppose hes talking about the data usage? Idfk
the bandwidth increase requirements are also largely bs
encoders are smart and can handle higher resolutions more efficiently
Ironically, streaming a 3D scene will be much more bandwidth efficient
energy usage, because he compared it to ai datacenter
though you'll need to render it yeah
Yeah, the cost becomes computation instead
But that's relatively cheap
we have "smart" tvs now, surely they can render it 
neuro uses a bot account so if she'd need to do age verification a lot of other discord bots including the popular ones would need it as well
oh smart tvs have like 2gb of ram on average and a really horrible arm cpu
I guess the higher end models could have more though, cuz 4K needs a bit of computation
considering that networking traffic are costly not because of energy usage but more of infrastructure requirements
we waste even more energy on streaming
I feel like that alone should be an indicator they don't know what they're saying
or do and are being misleading about it
its almost always better to transfer less compute more
that's why encoder exists
but yeah, for the reason of "energy usage", dude's a dumbass
i bet the "GenAI | Cloud" description is just random shit he put in to make himself good about it
and trying to justify hogging up resources for training the next generative AI which will be used purely for ethical purposes
I guess?
lmao
yeah its most likely an argument against people's push on "ai is taking away too much electricity"
I see no actual benefit from generative AI, I think AI could be better off used for research
ai bros, basically
i want alpha fold 3 but get image/video slop instead 
im not even entirely against llms, just that giant entities been going crazy about it burning money for what, better score at sota benchmark somehow
"agi guys trust"
I want AI to do my retopology, Not to generate the whole model and I clean up after it...
"need 400b more guys for agi trust"
Ive been getting advertised "3D model generators" on youtube
i want models that fixes things, not generate half assed shit
i've been endlessly getting ads about whatever tf those video gens
its annoying
lol me too
especially those thirst trap adult ai shit
its stupid because i can easily make those models in blender
the worst part
i tried blocking the ads
but youtube kept shoving that up my throat
theyre marketed towards people who dont know what they're doing, Pretty sure the AI has horrible topology too
it would be more creative and time efficient to just model the thing yourself rather than generating it and cleaning up after the AI..
the topology is always horrible
funny thing is that i wasted more time nagging ChatGPT to fix things that it broke even though i specified every single detail, problem and what to fix
I could've just done it faster i just coded it myself
also also... as soon as you get it to model something other than a smooth uniform object.. GG
the more pressing question is, if i knew the problem and how to fix it why am i asking chatgpt to do it
i swear this LLM stuff is brainrotting me
oh yeah i avoid using ai for coding
try to use it only for generating specific functions and see if that works for you
thats what programmers will be doing to save time in the future anyways
yeah those works ...for basic programming atleast
well no matter what you're programming, I think you can always get it to generate an input/output function
best part about those is that you can sandbox them most of the time
wait you're right
non global variables inside function would be easy to isolate in case chatgpt does some crazy shit
mhm!
Good design pratice is good design pratice
discord stop killing your autocorrect and let me correct stuff
you give me red swiggly, but give no correction options
only use llm for basic programming functions with defined I/O
that's what i mean!
I'm personally testing if it can rewrite some code from one lang to another
I am kinda over dealing with python's BS and want to rewrite in C
It's only going to get worse and the benifits of easy testing are no longer outweighing the pure speed issues.
plus C is starting to look easier due to how much overhead numpy is giving me
good call
if it doesnt work, I think it would best be to translate it yourself, because you already know how the underlying structure looks like
so its easier than writing the whole thing again
Absolutely
The process of getting the slop up to speed is quite something
caught me with a lack of emit side in the code, I had it stripped out as it was a botch system.
-# anyone wondering, 34-35 are active at once
yeah, I'm probably gonna use Opus in those cases
I don't like Opus cause it's noisy... but if I'm like 50-150kb over 10mib and dropping a quality setting with Apple AAC cuts off 450kb of bitrate, I'd rather choose Opus
#neurotic-neurons message I did it here and.. yeah, it's fiiine
I went with Vivaldi. Was irritated by subtle website issues with Firefox.
Only complaint is that the built-in ad-blocking seems to update slower than uBlock Origin. YouTube has intermittently given me the "adblockers are again TOS" black screen.
So Gemini made a Netflix website for me
I'm User 2
I like how the very bottom of the emotes are sharp but the rest is just a complete blur
I think it happened because it wasn't on the screen for long enough
on screen less time=more compression
and since it was only on there for like at most a few frames, it just kind of butchered it
I'm going to do a Neuro one next
this one.. might be tricky to look good.. we'll see
@noble zodiac advent of code day 2 part 2
def f(x):
s=len(str(x))
r=0
for c,q in zip(range(2,1+s),[1,1,0,1,-1,1,0,0,-1]):
n=s//c
p=10**n
d=(p**c-1)//(p-1)
m=1+(x-1)//d
r+=q+q*(sum(10**i*(p*p**i-1)*[9,99][i==c]//(100*10**i-10)for i in range(1,c+1))-p-d*(s%c<1)*(p*p-m*m+m-p))
return r//2
print(sum(f(b+1)-f(a)for a,b in(map(int,x.split('-'))for x in open('02.txt').read().strip().split(','))))
that inner loop annoys me greatly
first attempt, overshot 10mib (11.8mib) and the background does indeed look bad
unlike the Evil one, the background kind of needs to look good here...
wait, it is actually cut off.. I thought that was just a glitch on my end
wat
???
oh, it happened when I fixed the muxing of the mp4 cause yt-dlp likes to break it sometimes
fun
no, wait, the original video is like that, too
okay, seems like this is part of the stream
not an error on my end
I also messed around with tiny videos a while ago. This one is only 8kbps each for both audio (aac) and video (h264 86x64), at 677kb for 5 minutes, while still being comprehensible. Only mp2 goes under 8kbps and it sounds completely incomprehensible at 4kbps so I stuck with mp3/aac at 8kbps for these videos. Also, something odd I found is if the video is less than around 128p, discord will add horizontal or vertical bars to make it 4.1:3 aspect ratio. So I made it 4.1:3 ratio instead. Discord still added slight horizontal bars to it but they are barely visible being just 1-2 pixels wide on the left side
should use Opus 
Why? Isn't aac preferred and possibly also optimized for mp4?
Didn't know that
Guess I could try it but doubt it can go under 8kbps either so it'll just give better quality
You mean the song?
Fair point but it sounded good enough at 8kbps so I kept stereo
I thought it was a Neuro version
It is the Neuro version
the audio is Neuro?
Nyanyanyanyanyanyanya! is a legendary viral Vocaloid song released on April 7, 2010, by Japanese producer Daniwell (also known as daniwellP), featuring the voicebank Hatsune Miku. The track exploded in popularity on Nico Nico Douga, amassing millions of views within weeks and becoming one of the platform's most iconic hits, often credited with d...
yeah, nvm, it's not really sounding a lot better
it does starting at like 12kbps
Neuro sounds better
but the music is butchered
it's also more 9kbps
it might be using the wrong encoder.. hmm
I added -set-ctl-int 4024=3002 but maybe it didn't work.. that's supposed to force the music encoder
it's definitely using the wrong encoder...
okay, it's more just different.. this is also approaching 10kbps
hmm...
I have no idea why it would sound so bad. I used handbrake to reencode audio for the Nyanyan video and sometimes use audacity for specific effects/formats or kbps and mux it with the video using ffmpeg
Maybe the format you're using just sucks for low bitrate idk 
I think I accidently sent the 12khz one instead of 8khz, which 8khz sounds a bit better.. still bad 
I like the other one better 
ended up being 5kbps 
I think it's ruining by trying to do higher frequencies...
Yesterday, I wanted to make an excessively bass boosted version but after a lot of trail and error in audacity, I realized that 8,000hz is just awful at preserving bass, so I switched to 12khz then 16khz. I wanted it to sound like ear destroying bass but this is the most bass that can be added at just 8kbps
guess I might as well do parametric stereo since I'm doing AAC... let's see
ah, I gotta go to bed soon.. eh, ten minutes
goal will be 10kbps, though
it's not using parametric stereo by default for some reason >.>
meh, I'll look at this in a few days
dang, that's a high sdr
will need to test it in a few days
it did catch some instruments
but oh well, gets the job done for seeing how well this does and I'm not gonna go through the effort of trying to get the instruments out of the mix right now
I need to go to bed soon
lemme try one more
dang, captured a ton of instruments :/ but it picks up harmonies better which is good for this test, and I really need to sleep and can't test various models...
and, yep, removed the harmonies.. sounds pretty processed, too
Woah infosec crap
what am I looking at
Pretty neat 
-# Can't sleep? 
@fathom glade Summarize this chat
@grok spike this mf's drink with fent
is it that bad
dawggg why are games so goddamn large???
Because game developers realized they could get away with it
Once we have petabyte storage as the norm I'm sure we'll start seeing 100 TB games
aoc day 2 part 2, revised
t=0
f=lambda x:(s:=len(str(x)))-s+sum((q-99)*(1-((m:=1+(x-1)//(d:=((p:=10**(n:=s//c))**c-1)//(p-1)))+p*p-m*m-p)*d*(s%c<1)-p+sum(10**i*(p**i-1)*b'\tc'[i>c]//(100*10**i-100)for i in range(2,c+2)))for c,q in zip(range(2,1+s),b'ddcdbdccb'))
for x in open('02.txt').read().strip().split(','):a,b=map(int,x.split('-'));t+=f(b+1)-f(a)
print(t//2)
i miss the good ol days where 30 gigs was considered 'large' for a game lmaooooo
Recently tried out for honor and the game is almost 120 GB, but lets you start playing at around 8 GB
If the game runs (even if just the tutorial section) at 8GB what could possibly be needed taking up the other 112-ish GBs
4K textures ig? (which imo isn't a necessity since most PC players play at 720p/1080p anyway...
neuro-sama
who
you
the clanker kid

ohisee
wromg reply
ohisee
You need the bed ejector-2000
Or the bed shaker-2000

So lady awa, where is the location of this place called wrr that you speak of?
prison
prison has beds tho
ok
statistically speaking 99.99999% of people who end up in coffins never leave
so a coffin
what is a coffin but a bed for the dead?
I am curious about that outlier
entered as a joke
that's the vampires
and got out
Does anyone have a pasion for reviving old tech?
i was buried alive in 1342

doesnt exist anymore

Does anyone know how to make nested functions easier? I'm kinda uhh
Stuck
Why the hell can't I send a code block 😔
Use a language that supports it
LuaU
lines = lines .. "local function " .. vars[13] .. "(" .. vars[14] .. ") "
lines = lines .. "local " .. vars[15] .. " = " .. -- 100+ more of these
I am not proficient enough in Lua unfortunately
aww
Okie
I'll just lurk on the dev forums then
Thanks anyways
return self:whitespace();
end
for i, statement in ipairs(block.statements) do
if(statement.kind ~= AstKind.NopStatement) then
local statementCode = self:unparseStatement(statement, tabbing);
if(not self.prettyPrint and #code > 0 and string.sub(statementCode, 1, 1) == "(") then
-- This is so that the following works:
-- print("Test");(function() print("Test2") end)();
statementCode = ";" .. statementCode;
end
local ws = self:whitespaceIfNeeded2(code, self:whitespaceIfNeeded(statementCode, self:newline(true)));
if i ~= 1 then
code = code .. ws;```
I'm cooked
I'm NOT gonna get promoted 😭
yo
yo
fuck it
debian
i fucking hate how i cant select any text in the google drive website
it immediatly tries to open the file
I got a %78 on the programming languages exam!
The average was a %68.
I don't think I've ever been %10 higher than the average 
lambda calculus is hard though. Beta reduction, and envrionment handling too 😭
This is the lowest level computer science class I've ever taken
with all that though, this is probably the most interesting class I've taken
unplugging my keyboard between my pc and the pi is getting confusing
in my experience, people who switch computers often usually use a usb hub that allows you to change the output device
very convenient but im too lazy to buy one
the problem isnt really the switching, its my idiocy
i plugged my keyboard into the pi and started typing before realizing discord is not on the pi but the pc
you mean a kvm switch or like a thunderbolt hub
tried debian bullseye, same issues
maybe bookworm
if this doesnt work im going back to orange pi os
they probablt have some shit built in for the hdmi input stuff
Debian should be mostly the same or worse compared to Armbian in terms of hardware support
I thought they just use the kernel provided by Orange Pi
but it different



they have own patched version
the armbian was unnoficial, these debains are from opi official website
oh, that Debian
wasn't orange pi os debian trixie
these are the options
they also offer normal not-"Orange Pi OS" Debian

ye
I wanna get an orange pi
none of the orange pi os ones are debian. its oh, arch or droid


ah, i was thinking of this but i guess that's not official huh
Not for any reason thats the orange pi is for
I wanna make a retro emulator box out it
#3
is it just me or does the nix-community cachix cache keep breaking
i keep getting hit with 206s that break the build lately
oh boy, i'm sure it'll be fine 
still no nv12 on the third one
guess you're stuck with Arch then 
unless you want to figure out the kernel situation and port whatever is missing to one of the Debians
oh hey they changed an api again 
Has anyone here made a startup can you gip some advice
startup should be fast 
I've started a non-tech business before and have worked at small startups my entire career (~19yrs)
weird, the supposed patch doesn't work 
wonder if it's for an older driver version
how are you testing this btw
modetest -M rockchip -p | grep -A10 Plane
other way around, it's for the latest driver and i was using stable 
oh nice they improved logitech mouse support in 6.19
Hey guys, i'm doing a small project for a llm driven bot with Discord integration, but i'm a little lost on sources for a portion of It.
It involves an llm (done, local install) and TTS (done, with elevenlabs for now - It should also be local later). But i'm having trouble finding sources for good STT. Does anyone have sugestions on where to look?
comic sans?
comic code
parakeet 0.6b v3 is a good one
or just use whisper like everyone else does…
reading again - do you want providers?
i think elevenlabs has stt
as well
lets try ubuntu i guess
I have news update
the RK3588 does not support NV12

the hdmi input is either NV12, NV16, NV24, or BGR3
i was hoping to just do passthrough to the hdmi output skipping the gpu entirely
ye
hmmm
Hmmm... I'll give It a test.
I don't want to use elevenlabs too much because I need it for testing and I don't want to burn the tokens too quick
Thanks!
has different supported formats because it's a completely different IP block

the HDMI TX / output is the Rockchip VOP2 display controller
the HDMI RX / input is the Synopsys DesignWare HDMI QP TX
stupid
it's some other Synopsys "hdmirx" thing
can the HDMI input not just do RGB? 
oh ye
wrong 
me can't read
i have just tested
v4l2-ctl -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat=BGR3
v4l2-ctl -d /dev/video0 --stream-mmap --stream-count=100
and it does seem to work
yeah, that format is supported by everything I think 
should be fine as long as you don't run into HDMI bandwidth issues
im pretty sure 570x1140@180 should be fine on hdmi 2.0 input and 2.1 output
havent done the actual math tho
are you still planning to spin the helix at that slow ass rpm
900 rpm ye
15 revolutions per second
ye
the motor can go up to 1300 or so, but its a lot easier to match up the framerate and motor rotation at 900rpm
how are you planning to get 180 fps at that weird resolution into the Lightcrafter
i was hoping monitor = HDMI-A-1, 570x1140 @ 180, 0x0, 1 woudl work
- Lightcrafter does not actually support HDMI (only DVI, basically an ancient subset)
- max refresh rate of 120 Hz
also not the resolution you want 
well, you're correct that it doesnt support 180hz at 912x1140
but we're doing 570x1140
you can ignore that whole sentence
as long as it fits within the pixelclock of 150mhz you can set the edid to whatever you want
at 1140x570 it should fit up to 190hz in the pixelclock
we only need roughly 176 tho
basically, when it runs in quickfire mode with intermnal ram its able to do 4225hz. the only thing limiting the hdmi mode from doing that is the hdmi input chip stuff
from what i could find in the texas instruments forums, its all pretty much limited by the 150MHZ pixel clock
there are 2 separate ram chips. while one chip is being displayed the other one gets filled with new data from the hdmi
if we're still limited to 120hz then thats fine i guess, still 2880hz being displayed

I understand pattern sequence mode now
ye you'll be limited to 2880 Hz output refresh rate
the TFP401 can't do more I think
unless it supports weird resolutions, then mabe
only 2880hz? smh, you gotta pump those numbers up!
pixel rates up to 165 MHz
if you reduce the amount of pixels per frame, you hsoudl be able to pump more frames throguh the pipeline
i think it should work
also, the limit of the lightcrafter is supposedly 150MHz, so i find it strange that the TFP401 does 165
the lightcrafter is 912x1140. it does support weird resolutions
The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! It will decode any resolution from 25-165MHz pixel clock, basically up to 1080p. We've used this breakout with 800x480 displays
it's weird since the EVM and the DLPC350 docs both specifically mention a 120 Hz limit
ye this makes sense
has to support weird resolution due to pattern sequence mode
all in all, i dont think it should be an issue. and if it is we still get 2880hz
4225hz woudl be cool but 2880hz is already a lot
ye just try 
im happy with either
I think you can do up to 3600 Hz if you really need to
but only through the flat panel display link
30-bit color
where do 2 bits go
not exist
idk
this device is confusing
I slept okay 
Yeah, a little on the aggressive side but that means nearly 100% of reverb is removed
Which is cool
What's this supposed to be?
A Lua Obfuscator, search Prometheus Obfuscator on google. And go to unparser.lua, you'll find that block of code
If you don't know what an Obfuscator is, search it up cuz I'm too lazy to explain
ouh, did the projector arrive?

I have no idea how they manage to make that in Lua but ok cool
Learn Lua Twin ✌️
I'm currently learning piano right now, wouldn't have time for that. Sorry
nah
oooh
delivery update tho
sorted

Arrives Tue, Feb 17 - Tue, Mar 17
i swear this said 14 before
how dare they
nah im just schizo
how dare you

You're schizoing 
Also, dang been a while since I worked out again and now my body hurts all over
hi! im a bit new to code and i got my AI to speak but the AI is having odd and strange/off topic responses and every time it try to fix it its not working and was wondering if you all had some ideas how to fix it
not without knowing more about it. your issue is too vague to give any helpful advice.
what do you expect to happen and what is actually happening?
what have you tried to do to fix it?
(also, you haven't said anything about your "AI" which speaks other than it can speak. no idea what it's based on, which language, which libraries, which models, what hardware, what OS, nor what code you wrote)
my initial idea is that it's mishearing you if you are using speech-to-text but then I assumed you'd've ruled that out by judicious use of debug prints already. but then i remembered you are "a bit new to code".
is it actually responding correctly to what the STT part is sending it, even though that is not what you said?
but i still don't know what you mean except it is (sometimes? always?) having "odd and strange/off topic responses".
so next I'd check that you are setting up the context properly. if it's "sometimes", as in "it responds normally to me the first time, but then acts like it only just met me the next time" then that points to you not handling context properly.
also if the model is small, that could explain it always giving strange/off topic responses.
?? wait what is neurobot
neurobot is jsut neurobot
🍪
Om nom nom
You've given me 3 cookies! | I've received 282041 cookies total!
oh it’s a qol bot lol
🍪
Om nom nom
You've given me 11 cookies! | I've received 282042 cookies total!
🍪
Om nom nom
You've given me 1 cookie! | I've received 282043 cookies total!
how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long how does the neurochatting thing work does it just measure the length of a message and react if it’s really long
aha cool
aww, thank you~ ( ◡‿◡ *)
🍪
Om nom nom
You've given me 2 cookies! | I've received 282045 cookies total!
🍪
Om nom nom
You've given me 2 cookies! | I've received 282047 cookies total!
aww, thank you~ ( ◡‿◡ *)
what if we made a python script to type out the string “/cookie” on a while true loop and all ran it so neuro would become foie gras on cookies
but… cookies
fine moderation it is 😔 (no pun intended)
🍪
Om nom nom
You've given me 3 cookies! | I've received 282049 cookies total!
In case of an investigation by any mods, I do not have any involvement with this person, I do not support any actions made by them, and anything that looks like encouragement to break the rules is purely coincidental.
I'm not repsented here and I intend on keeping it that way
what if i use both?
cloudflare is jsut a bridge between the portforward and the domin so i dont have to share my ip adress
Bumped me up an entire dlss tier on cyberpunk path tracing to balanced, never let anyone tell you overclocking isn't worth it
This is at stock power levels too so thermals are pretty much identical to before
tbf discord does have a pop up when you click external links
but yes no one likes this decision
The hacker would probably cook up a domain like discord-age-safety.com or smth
True enough
The laziest fix to this is just to block forwarding bot message and that gets rid of the bulk of htem
or actually display who sent it in the forward
i had to jsut add
sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia
to make the install of the mali drivers work 
support-discord[.]com could also trick people
What's funny is that discord already doesn't allow you to forward messages from 18+ channels to normal ones. Not sure about dms to those who haven't opted in.
Though I doubt that still works
fuckkk
It doesn't for me
I was probably not being as careful as I should of been clicking links because Discord wasn't popping up the window and I assumed they were "trusted" sites
And then I realized it just NEVER popped up
what operating system are you using? which processes in particular are getting killed?
is there any indication as to why they are being killed?
and you say "My every process" do you mean mean "every process i try run" or "every program that i've written and try to run"? ( this #programming , after all)
[do people just come in and ask questions and leave?]
Ubuntu 22
And
~/project $ python -c "import pandas as pd; import glob; [print(f'{f}: {pd.read_parquet(f).columns.tolist()}') for f in glob.glob('DATASET//*.parquet', recursive=True)]"
Aborted python -c "import pandas as pd; import glob; [print(f'{f}: {pd.read_parquet(f).columns.tolist()}') for f in glob.glob('DATASET//*.parquet', recursive=True)]"
~/project $ clear
Aborted clear
people kept being under the impression that overclocking are "way more power for tiny extra boost" for some reason when you can actually always do both overclock and undervolt at the same time and is usually the correct way of doing it.
like come on, its 2 settings away. don't have to be absolute uneducated idiot who thinks overclocking always means power bills goes up
Any idea how to fix it ?
some people are so hellbent on it they refuses to learn how voltage clock curve even works and just always assumes that more clock = more watts
try
read INPUT </proc/uptime; echo $INPUT
this is a work around so we can read text iles. just want to make sure that works first.
(i'm going to assume cat would just abort)
~ $ cat /proc/meminfo | head
MemTotal: 7801748 kB
MemFree: 174068 kB
MemAvailable: 2847652 kB
Buffers: 2452 kB
Cached: 2508128 kB
SwapCached: 100536 kB
Active: 1964128 kB
Inactive: 2719728 kB
Active(anon): 482644 kB
Inactive(anon): 1953172 kB
~ $ dmesg
Bad system call dmesg
~ $ cat /sys/fs/cgroup/memory.max 2>/dev/null
~ $
NO
After limit my vir ram it happens glitch
And it glitch out and said
This
~ $ ulimit -v
unlimited
~ $
what about tail -n 1000 < /dev/kmsg
It is under Bad system call
MAYBE MAIN MACHINE WAS NOT REACHING
while read -t1 i ; do echo $i; done < /dev/kmsg
if that doesn't work, then you've got a sick computer and migiht need to restart.
the fact it's giving different errors (Abort sometimes and Bad system call others) seems to indicate memory issues when it's loading the program. (and that some programs seem to work miight just be that they were in memory before the issue occurred)
It finnally working after restarting the pc
you might have had a kernel memory error of some sort. if it happens again, it might be you have bad RAM that needs replacing. ;/
you should probably download memtest86 or something similar and run it to make sure things are ok
twice in a day is wild
"f you are on Kernel 6.1+, download the 5.10 version"
fuck fuck fuck

i hate this shit
im jsut going back to orange pi os
i have wasted hours of my life
Dam that requirment are high
For tranning each need somewere about 16 to 24 gb vrams
if it was easy everyone would be doing it.
I'd argue that is both due to theory and hardware
Why did you move in the first place? 
use-after-free in chromium just got patched 
in other words, i lowered my standarts and now jsut want something that works
Today is valentines day
:(

Today is also black day
You can always remove it 
fair
testing diffusion settings be pretty spicy
got for $14 LMAO
Where 😭
He's got GPU. GET HIM
be careful of any australian swarm that will jump you
HI
bro showing it off in public is crazy
"guy was in an alley. wearing black with a beret and a mask over his eyes, holding a bag with "LOOT" stenciled onto it. seemed legit."
my orchestration program is coming along ;]
it actually ran the brain and correctly showed it as having a yellow status. (because it didn't start a /health service like it promised it would in the config)
and terminating it worked too
this will be much better than having 3+ tabs open in the terminal.
What you building?
a tool to launch multiple console apps without opening multiple consoles. has a simple "if the process exists, status is yellow, unless it responds to a request to a REST endpoint when it's green, otherwise the process is dead." display.
it will have dependencies so i can tell what type of other program I need to run. will also make testing easier.
You may be interested in pm2
Ahh, systemd
for windows. and with a gui.
I see
And CMD with tabs is not sufficient?
Doesn't windows already have service manager?
Or a batch script
it also lets me change the config and turn on different sets of services in my own scripts.
mostly coz i've had to open 3 or 4 terminal tabs to do stuff and it's annoying to tab between stuff and accidentally kill the wrong thing or start it up with the wrong set of testing arguments.
this should reduce those annoyances.
Well have fun when Microslop Copilot+ OS decides to suddenly break it for no reason
it uses subprocess and request.
and dear pygui.
not a lot to break.
When you vibecode an OS nothing is off-limits for breaking
if you insist.
Remember we're talking about the OS that one day just completely wipes your SSDs for no reason
Well it did delay the release of NEVER because it happened to the editor of that
apparently.
Official Vedal sourced information
also cmd with tabs won't tell me when a process has stopped responding to REST.
(i thought that was clear with having a yellow status)
If you haven’t been following this
︀︀
︀︀- a huge number of people essentially fell in love with this old ChatGPT model called 4o
︀︀- it was turned off yesterday
︀︀- they are going crazy
︀︀- generating images of hamsters burning down OpenAI
︀︀- threatening OAI leadership
︀︀- etc
︀︀
︀︀I truly thought the whole thing was some goofy satire for a long time, but I’ve realized this is just what a protest movement lead by people who fall in love with an early AI model looks like
Quoting Leia Harris (@x_LeiaHarris_x)
︀
If 4o is really gone today, we will #never4orget what @openai and @sama have done to us.
︀︀
︀︀#keep4o #keep4oforever #4oforever #ChatGPT #sama #openai
really 😭
yes

omg.... conspiracy! that@sama is the same sama as in Neuro-sama????
my gpt4o in visual studio 2022(copilot) still works
I guess they can fell in love with visual studio instead
"b-but cowde is scawey!!!1!1 I should be allwed to assess muh gpt4o on chatgpt!!!!11!"
someone will hack up an "IDE (wink) for 4o lovers"
just the chat part. no files, no git, no build. just talking.
Honestly this is the funniest thing about the situation
gonna be priced higher than claude tokens too
because gotta get that juicy cash
for them, hopefully.
keep 4o as a 0x for me plz.
yeah
I hate that this is the most likely possibility if they maintain it
I'm mixed on this
noway The red triangle
i think getting rid of the version which fed people's delusions, paranoia and distrust is a good idea.
why am I surprised
I am mad because they are just profiting off of people who is emotionally vulnerable
what if instead of chatgpt we had catgpt, and what if instead of tokens we had whiskers, and what if the dataset was all meows
one of my family broke up with her partner because they were becoming so self-isolating and even delusional.
coz of chatgpt
what if you trained a voice model on cat meows?
oh. god.
this is like, actual genuine concern
They shoulda shut down 4o immediately once 5 was out but money
AI interactions can be difficult for some people to treat with the right degree of both "this isn't an actual person" and "they don't know everything". especially when they're agreeing with you.
I saw an article about a woman who once 4o was shutting down was announced, cancelled her openai $20 sub, exported her conversation to caude
and bought the 130$ sub
married too
oh yeah what the hell
maybe after they announced it closing down, that prompted her to actually compare the different services instead of complaining about the one she currently used going away
and maybe claude performed better
Mate people will get attached to a rock with googly eyes
theres no shot people don't get attached to LLMs
also have you seen which server you;re in
i mean
okay yeah good point
but we're not marrying neurosama... for the most part
yeah cos half the people here ship her with evil instead
the rules even make a joke/exception about parasocial relationships with the twins.
There were also people who genuinely got mad at vedal for "mistreating" evil
it's generally a bad idea to mistreat anyone who looks like a person because it can make it second nature to act that way.
and these ones can remember.
at least it probably wasn't written by AI. ;/
(but it's an indicator of poor code quality when there's a lot of them... means someone didn't actually read it before approving it.)
My measuring stick is always if I could understand that being, then I would treat it with proper respect. Which is why I can't ever work in a farm with slaughterhouse lol
I keep finding myself typing stuff like "Sounds great, do that. Thanks!" coz that's what I'd type to a person.
i'd probably be much more upset and/or worried about an actual human person who behaved like co-pilot does sometimes, but overall they're a decent enough intern.
Yellow !
i'm pretty sure that the reason warning things used yellow for the "it's kinda bad" state is because that's what color you get when you mix green ("picnic in the forest") lights with red ("forest is on fire") lights.
Traffic light color is actually used in industrial equipment too
So Red-Yellow-Green is pretty standard yeah
Like this
traffic light colours were chosen because of how humans naturally respond to those colours, no?
made it so if an array consists exclusively of strings and/or numbers, then convert each of the elements into a button on one row. then if any of those buttons are pressed change it to a list with editable fields.
now it takes less space most of the time to show stuff.
very pleased. ;]
(and of course it change back again when you click the "done" button)
At this point i think it would be easier to just do the v4l2 input in vulkan
Just rendering directly to the screen via texture
Yes but also physics. Red has a good penetration in foggy weather due to the longer wavelength
The other 2, I don't really know
probably the traffic lights came from train signals. maybe they had yellow first too.
(like signals for the driver, not the crossing ones)
In 1920, the first four-way, three-colour traffic light was created by William Potts in Detroit, Michigan.[15] His design was the first to include an amber 'caution' light along with red and green lights.
Wikipedia.
Apparently also the first traffic lights exploded.
did they generate this art in chatgpt-5
CSS is hard apparently
that's one interpretation of how to display it.
it's not the usual one, but it definitely is one.
I mean you can clearly see the intent
but yeah that's true
doesn't mean it's good
doesn't mean it's intended either
but it is a way
red is also the color of blood
subconsciously a bad thing to see
woohoo ! successfully started all 3 processes and it correctly displayed the status of each as they came online (and in one case went offline after 1 second but that's an unrelated bug)
procrastination project #3 is almost complete.
then i just need to do #2 and #1 and i can actually think about working on the things i should be working on instead.
Maybe i should start vibecoding !
no
it's a great way to get a project to debug.
if you're into that kind of thing.
Gemini earlier surprised me by actually searching for documentation and asking me permission to download it and then if i approved it being used as input.
safer than you'd think. also kind of annoying.
Gemini is still annoying me and so i switch to opus because it was
Smarter then gemini
the 3 Pro is much better than the 2.5 Pro was
Agreed but what ure use case to use gemini ?
Dam
Been busy. And had some thing get stuck for a while and kept saying "continue" without reading anything every time i looked back. that thinking probably took a lot.
eventually i just restarted in a new prompt and it did it in like a few minutes. it seems to work better if you make new conversations regularly.
ah.. only 1/3. was misreading it.
I think model is still trying to retain the chat conversation and so chat u do too much chat that model forgot and what context u give in first the forgot and focus on new context
there is a sweet spot where it "understands" enough now to do the job but hasn't gotten distracted by all the other things it's done.
that's when it act's like a real person for a few interactions and you actually make progress.
Dam I don't have image sent perm
hmm. even if i ran out in co-pilot i've still got my daily uses with gemini-cli. just verified that seems to be working properly now with gemni 3.
one of my friends who still works at google swears by gemini-cli, but i think they get to use slightly better models than us mortals.
the fact that gpt 5.3 codex costs as much as gemini pro is kinda of funny
OpenAI asking for too little or too much?
How is ure ai tranning was going?
They are offline :(
Ai tranning minimum ram 10 mb
But it smallest model
insane wordington
i got reverse scammed
the repair shop guy told me its a 3070
apparently it is a 3080Ti
Nice
I wonder if they drive JohnCar738 to JohnWork925
My mode tranning is getting cooked
num params: 6528
step 1 / 1000 | loss 4.7417
step 2 / 1000 | loss 4.6436
step 3 / 1000 | loss 4.5674
step 4 / 1000 | loss 4.3682
step 5 / 1000 | loss 4.2548
step 6 / 1000 | loss 4.6464
step 7 / 1000 | loss 4.3826
step 8 / 1000 | loss 3.9831
step 9 / 1000 | loss 4.1971
step 10 / 1000 | loss 4.2112
step 11 / 1000 | loss 4.1087
step 12 / 1000 | loss 3.8753
step 13 / 1000 | loss 3.5269
step 14 / 1000 | loss 4.2356
step 15 / 1000 | loss 4.7603
step 16 / 1000 | loss 2.8014
step 17 / 1000 | loss 3.5131
step 18 / 1000 | loss 3.0281
step 19 / 1000 | loss 3.5288
step 20 / 1000 | loss 2.6713
step 21 / 1000 | loss 3.6145
step 22 / 1000 | loss 6.5406
Well i put song lyrics 🤣
i wish there was one standard URL and method for the "/ping" style health check endpoints across every service. ;/
i stupidly assumed they'd all be GET and now two of them need POST.
woo! now it can handle /health endpoints that require POST.
and I get a green square!
LLMs are good at making repetitive edits to JSON files, like converting all the services from a "network" + [ paths to endpoints] -> [ "url" + "protocol" ] schema was trivial for it.
Yeah, that's what they're good for when coding basically. Making boilerplate and throw away test/playground code
Wrong data :)
--- inference ---
sample 1: 11:04.390 --> 03
sample 2: 08:01.230 --> 00
sample 3: 04:05.090 --> 10
sample 4: 11:07.270 --> 05
sample 5: 04:26.980 --> 04
sample 6: 01:18.460 --> 13
sample 7: 03:07.210 --> 03
sample 8: 18:39.530 --> 13
sample 9: 07:24.580 --> 15
sample 10: 01:10.350 --> 03
sample 11: I ou tehyou tou
sample 12: 05:49.930 --> 10
sample 13: 01:24.460 --> 16
sample 14: I'l tou tonon d
sample 15: I tal the tou th
sample 16: I thish t thin s
sample 17: 02:18.980 --> 09
sample 18: It thin ane we s
sample 19: 01:08.290 --> 16
sample 20: 04:23.130 --> 11
it might need a little longer in the oven.
True
perhaps there might be some timestamps that need cleaning
I forgot clean up data set so and just dumped the data set
I will be back
adjust your learning rate

step 1 / 1000 | loss 3.0075
step 2 / 1000 | loss 2.8725
step 3 / 1000 | loss 2.9672
step 4 / 1000 | loss 2.9229
step 5 / 1000 | loss 2.3033
step 6 / 1000 | loss 2.0312
step 7 / 1000 | loss 2.4992
step 8 / 1000 | loss 2.2207
step 9 / 1000 | loss 1.9362
step 10 / 1000 | loss 1.3447
step 11 / 1000 | loss 2.1302
step 12 / 1000 | loss 1.4773
step 13 / 1000 | loss 1.6167
step 14 / 1000 | loss 0.6918
step 15 / 1000 | loss 1.8763
step 16 / 1000 | loss 0.9096
step 17 / 1000 | loss 1.3725
step 18 / 1000 | loss 0.3497
step 19 / 1000 | loss 1.5835
step 20 / 1000 | loss 0.6389
step 21 / 1000 | loss 1.0829
step 22 / 1000 | loss 0.2662
step 23 / 1000 | loss 1.1805
step 24 / 1000 | loss 0.4923
step 25 / 1000 | loss 0.8260
step 26 / 1000 | loss 0.3201
step 27 / 1000 | loss 0.8148
step 28 / 1000 | loss 0.3806
step 29 / 1000 | loss 0.6392
step 30 / 1000 | loss 0.3219
step 31 / 1000 | loss 0.5905
step 32 / 1000 | loss 0.3412
step 33 / 1000 | loss 0.4923
step 34 / 1000 | loss 0.2496
step 35 / 1000 | loss 0.4713
step 36 / 1000 | loss 0.3295
step 37 / 1000 | loss 0.3778
step 38 / 1000 | loss 0.2513
step 39 / 1000 | loss 0.3933
step 40 / 1000 | loss 0.3016
step 41 / 1000 | loss 0.3188
step 42 / 1000 | loss 0.2783
wuh is this a subtitle thingy
That data set
now evaluate loss for another validation dataset 
step 438 / 1000 | loss 0.2231
step 439 / 1000 | loss 0.1640
step 440 / 1000 | loss 0.2324
step 441 / 1000 | loss 0.1499
step 442 / 1000 | loss 0.2230
step 443 / 1000 | loss 0.1639
step 444 / 1000 | loss 0.2324
And It's overfitting

what the fuck is up with my fate
why did every 3080Ti i touched would always burn a single mosfet
this is the second time
So maybe the guy didn't reverse scam you lol
on the second 3080Ti i've touched
uh
so uhhh
i got both good news and bad news
the bad news, already told
the good news though... i desoldered the inductor associated with that burnt mosfet and it seem like it got initialized
good news is you've got hot air rework tools and a replacement mosfet?
(disabling that one vrm line)
though my test bench is stuck on BOOT debug led
but at least its NOT "VGA"
so imma assume it actually gets initialized
Dead gpu
I think
interesting. seems like you can (according to some people on the internet) get by with dead VRM lines.
Yeah, but the peak power consumption would change
this one has 18 phases
Also depends on how the power line is wired
removing one won't change much
will probably just stress a few others a little harder. make your super expensive GPU die a year or two earlier than otherwise
could always undervolt
also i got it for $14 so

oh
OH
WAIT
OH SHIT
a bit display just now
istg the way this person talks and what about
is this 100
it has to be no?

are you 100vestigating rn
not a new account. months old. lots of details in it. probably not.
active since 11th of this month thoughever
do they have a history of buying other active accounts or do they just make a new one each time?
now i feel like it's working properly.
Happy birthday @real sierra
existing
vs2026 when ram exists 
244 words in 6 seconds. except i didn't want it to wait until it had finished speaking so i need to redesign that part of the flow. it's streaming up until it hits a certain point. need to re-streamize it.
and if i'm getting that rate i can try bumping up the model size maybe.
(it's a problem because the TTS limits the input to 500 characters or it truncates it. ;/ and because 6 seconds is about 4 seconds too long. for a response.)
So, how is the volumetric display progressing sam?
hdmi input software support is dogshit
I wish I have opi5 to test it out too lol
I didn't even know they have HDMI in when I recommend it to you ngl
oh neat
Man, the kernel maintainers sure is awesome
Taking up space from a good ide like IntelliJ IDEA
rider has a ce now
Hello
How is u're life was going ?
BTW I JUST FINISHED MY LLM MODEL
This channel is dead
:(



Engineering 100 
you'd be suprised how often you stee stuff like that in the wild.
if it works it works
ye
By using a fuse, you're better than 70% of projects I've encountered

Yes, they released it in 2077 haven't you heard?
Each step was 16 samples
ye kernel 6.20 is kernel 7.0
gah
Your schizo about 100 is probably right 
I'm getting to the point where I'm being confused by large numbers (almost running out of fingers and toes again), so the next kernel is going to be called 7.0
:mlntcandy:
lady awa of wrr is typing
their username is 69_69_69_..., 100 used a similar one before

specifically similar to this though
isnt that always how it is with the linux kernel
the minor version just refers to the merge window and the major version just refers to how many times the minor version got too big
theyre obsessed not you 
because i thought you read it as “you’re just obsessed with numbers” which is dismissive of your point so you decided to defend it

my literacy
insulted
make a rope out of grass and use it to drag a tonne for 10 laps
please work this time

i made a soap out of grass and used it to brag a ton for 10 naps
To be fair though it was only partially the kernel, it was also the fact that I was doing P2P on 3090tis on an x299 chipset.
The way p2p is handled by x299 isn't great and it causes an obscure voltage sag on the cpu that I only found after fixing the parched driver and fixing the kernel version
eniac
I always thought the Soviet water integrators were cooler tho


📣 bweee bweeeeee bweeeeeeeeee

this channel is a psych ward and shiro is staff who’s also kinda chill
bweeeeeeeeeeeeeeeeeeee
psychic ward
to prevent
mind reading


Anyone that attempts it will be left with just the shell of a person they once were
i dont mind reading
I'd even go so far as to say I'm a big fan
kronii
no wonder i'm a Kaschenite
Should I update this project gng https://github.com/weenachuangkud/FastCast2
Looks stable to me
that pfp is incredible
it’s very 2014 if that makes sense
hello, i got an idea to make a game but i know absolutely nothing of programming or anything like that, what program could i use to make a game with real time combat? 2d most likely
unity or godot
there are also some more niche engines like rpgmaker for more specialized stuff
depends on how you want it to look. also "absolutely nothing" of programming is going to really make it hard.
you're gonna have to program if you're making a game
idk, never used it
what do you mean by "real time combat"?
how do you want it to look and how do you want things to be controlled?
coz "real time combat" sounds very complicated and messy.
not turn based +
"real time combat" is a pretty broad term. from pong to E.V.E.
what game is like it?
recettear like something like that
there are some game engines that require less or no coding like Construct or GameMaker
expect to have to learn some programming for anything that's not super basic though
for the 2 people who will run pytorch via rocm on RDNA4 // specifically gfx1201 navi 48 (possibly, havent been able to test on my gfx1103yet) - dont set HSA_OVERRIDE_GFX_VERSION otherwise you'll be like me and spend a week with training runs doing Memory access fault by GPU node-* near step 0 over and over
what did you set it to
i can learn on my own, just nothing too complicated
2D, Godot 200%
and coding isn't black magic. it is simply a different language to express yourself like english or math
Could even say...
2D00%












