B580 settings and oc

[lament coyote]

So i recently got the new b580 titan oc I also am using the 12700k n z790p mobo what are my best optimal setting to get the best performance possible honestly can't complain bout this gpu it has run beautifully just wanting to see if there are better setting than stock on this card

[royal carbon]

what oc settings are you using?

[lament coyote]

im on stock settings atm havent changed anything

[pastel gust]

I'm using these settings

Here’s my before and after in rdr2

Although, in certain parts of the benchmark, I was getting a pretty massive 15% boost

It really helps my 1% lows

[lament coyote]

What cpu are you running may I ask

[pastel gust]

Intel Core i5-14400f

[lament coyote]

Ok so not far off from mine awesome ill give those settings a try a report back woth my findings ty much

[pastel gust]

👍

If you want to be safer you can actually do 0 voltage 90 power and 225 frequency where you'll get slightly (not noticable) more performance and use less power

[lament coyote]

So went with the same settings you did i beat the 4060ti furmark scores by almost 1000 point everything looks stable temp went up all of 4 degrees so I run at 58 degrees now I'm pretty damned comfortable with that lol

My beginning score

Ending score

4060ti scores lol

[pastel gust]

awesome

[lament coyote]

The final settings inwent with

That's my 3dmark score

I appreciate you're help bigdog i literally built this as my first pc a month ago lol I didn't even kno wat a gpu was then lol

[pastel gust]

I built my first 2 months ago lol

same boat

make sure you don't overclock too much though, could get unstable to shorten the lifespan

35 for voltage is pretty high and I'm conservative with it so I stay at 30 or below

(I'm no expert)

[lament coyote]

yea i lowered back to 30 that was more a test to see wat happens lol

That was my temps power consumption n everything n it's all super stable ran a stress test for over an hr

The 64 was the highest saw n that was during the 3dmark bench test

[pastel gust]

holy crap 3300MHz

[hazy oar]

this is pretty great but what are your core voltages, im not seeing them on the chart? they have to be pretty high im guessing 1.070-1.085

[lament coyote]

I'm not sure how id find that info

[lament coyote]

Ran stable st that as well stress tested it for 8 hrs never got over that 64 degrees

[pastel gust]

8 hours bro

Wtf

[lament coyote]

If you tell me how to access tgat info id be happy to benchmark it it again n find out for you

[lament coyote]

To be honest that was accidental started the stress tested n had an emergency fine call so left n forgot to to shut it down so yea 8 hrs but it ran perfect without issues it seems

[hazy oar]

I use HWinfo64 and it gives me a read out, so does GPU-z from tech power up

[lament coyote]

That's wat that read out is from is hwinfo64

I tuned my oc down to preserve longevity but is my current hwinfo readout

I'll look up the other

This my more conservative oc

[hazy oar]

1.035V is not too shabby I believe stock spec says 1.020 max but they can take up to 1.080. my card cannot do 3200 on anything lower than 1.070 atelast that Ive gotten to hold without the intel software crashing

[lament coyote]

I'll put it on the 3300 settings I had it on n run another bench test for ya n show the same info

Tomorrow

[lament coyote]

This at 3250

This at 3300

I did find that at 3300 it stays stable thru various benchmarks n stress testing and most single player games as soon as you attemp to play a multi-player game it'll crash n turn off resizaeble bar

[hazy oar]

I also noticed the same benchmarks seem to handle the edge clocks better I could get 3250 at 1.070v and steel nomad or timespy over and over but it would crash in cyberpunk and world of warcraft

I think this week Im going to attempt to tackle the 'advanced GPU tuning' tab XD

[lament coyote]

3250 has been super stable on everything as long as I don't set the power limit over 108

[hazy oar]

what model are you on? the sparkle titan?

[lament coyote]

Yea the titan oc

[hazy oar]

nice same card I have

[hazy oar]

ive been messing withthe voltage graph for a few hours today and it doesnt seem to want to old the ettings but changed them auses the mto move slightly. im not sure exactly what is going on but im not going to mness with it for now

[hazy oar]

another few hours spent messing wiht that voltage graph and its a no go. I did get the ram up to 20.50 which did improve my 1 and .1% lows a few frames but thats it

[hazy oar]

I hsould try 108 and see at 114 its a crash every time cause I see the core voltage jump to 1.020

[lament coyote]

Those are the settings I use

[hazy oar]

Ill have to test them out. jsut got done getting stuck in a memory clock boot cycle from hell XD

[lament coyote]

That sucks lol I've been on those settings for over a wk now no issues

[gleaming panther]

i once got my b580 to take like 180w with +50% voltage, 120% power and +350mhz freq offset
(it was at 3.4ghz)

[hazy oar]

oh no I was messing with the ram on a diffeerent thing

[hazy oar]

if you got a solid clock on the ram like 20.50 - 2075 you could likely get a world record or atelast in the top 15 with a score from a clock like that

[plucky fable]

thanks for all the convo above, i have a gunnar tri and going to attempt to use your settings

[lament coyote]

how did it work out for you