#arc a750 taking 8 minutes to generate 30 step img in foocus 1152×896 ∣ 9:7
15 messages · Page 1 of 1 (latest)
By the way, that problem was kind of solved after some instruction, but now it takes too long. Sometimes it takes four or five minutes to generate an image, but the first two images generate in about 45 seconds or a minute. any clue ?
It seem to have something to do with shared GPU memory. If you are on windows launch task manager alongside SD and watch how much shared graphics memory is used. When it slows down you can tell it is using main memory and not dedicated vram by looking in ARC Control, as vram read and write useage is very low around 3-5gb per second when it should be around 200+ GB a sec.
you are right, in first two image it taking full speed of the gpu but after that
it aint taking full load and give 10s it;[
am using arc a750 what driver this for?
I am using driver version 31.0.101.5448.
wasnt this for a580?
You should be able to find driver 5448 for your card here. https://www.intel.com/content/www/us/en/download/785597/intel-arc-iris-xe-graphics-windows.html
This download installs Intel® Graphics Driver 31.0.101.5534 for Intel® Arc™ A-Series Graphics, Intel® Iris® Xe Graphics, and Intel® Core™ Ultra Processors with Intel® Arc™ Graphics.
i get it this driver for all the arc gpus they mentioned i though its only meant for a580 haha
Download
gfx_win_101.5448.exe this one right?
31.0.101.5448 WHQL Certified
i installed the 31.0.101.5448 WHQL Certified and its working fantastically 1.27 it s ,its all thanks to you
you know about this errror RuntimeError: Native API failed. Native API returns: -999 (Unknown PI error) -999 (Unknown PI error)?
I don’t know what the cause of this error is, I have had SD run for 8+ hr without the error and sometimes it happens after the first image is generated.