#SpeedyBee Mario 5 Build for a friend
1 messages · Page 1 of 1 (latest)
Thanks
I dont build my kwads myself…
Huh? So who built the drone in the picture?
Yeah, that's what I understood
You've done a great job with the soldering
I could never get it just right
Thank you so much
And here is my mario...
Went through A LOT
Few things to not even look at... :
The arms are covered with my old bike's inner tubes for better protection
I have an xt90 at the back, and I use an anti spark xt90 to xt 60 adapter between the drone and battery. I need it because my batteries do a spark when connected and it burns the inside of the connectors...
And forget about the soldering
It was a long time ago when I was a noobie
I am so much better now a days
Thankfully, this drone didn't need any components changes due to damage
It is very well protected. Front camera guard, a horn to protect the battery, even the antennas have a special mount so they won't stick up
Still not sure why I have those holes on the front of the camera protection print. Maybe for even more protection, it might take the impact first and bend 🤔
That's normal inrush current, and it happens to everyone.
But I get burned connectors... everyone else has clean ones
Everyone who has my batteries says the same
Even when I connect them to my charger you can hear a spark (thankfully that one doesn't burn the connectors)
Those are for t style antennas
Ohh
Didn't realize that the person who made the print made those to have an antenna there
Probably the worst place to put it. So unprotected. One bad crash, and the antenna is gone.
He made a print to guard the camera, but gonna ruin his antenna
Yeah for 900mhz antennas prolly
Its ok there..
Very nice for longrange
When you turn back, you get better rx link
True, but long range with a 5 inch? I mean, it's possible...
Personally I fly freestyle, so an antenna there is a really bad idea
You will smash it
Trust me, it works
Think about a 2.4ghz Antenna
