#mobula 7 multiple issues

1 messages · Page 1 of 1 (latest)

viral igloo
#

hello i bought a mobula 7 using dji n3 and the radiomaster pocket, i updated the firmwares and i have now the crazybwef4sx1280, the controller seems connected since when i turn it off the drone starts flashing, when i try to use the controller with betaflight the input are 0 also in flying mode its still blank without anything put. apart from this one motor seems strange with a freeze and then a noise idk if you can ear it in the video.. i cant really find the issue.. oh and also using the drone with the battery when arming it it doesnt do anything at all

#

i know i should take of the blades..

stable iris
#

when you say updated the firmware do you mean you updated betaflight? doing so would have wiped all of the settings from the flight controller and you will have to load the manufacturers cli if you havent made a backup

viral igloo
stable iris
#

10.10 is the configurator version not what's on the drone

viral igloo
#

before it was this i think, at first the xontroller would show up in betaflight, as soon as i changed the firmware to crazybeef (to put the phrase in the receiver section in betaflight

rn_image_picker_lib_temp_d7da3edf-2d43-46bc-ab83-65e9c56754ed.jpg
viral igloo
stable iris
#

you changed the target?

viral igloo
#

where sorry?

stable iris
#

you cant just flash a different target

#

you need to use the one it came with

#

and it has a serial receiver not spi

viral igloo
#

i changed it cause there is no option to put the binding phrase in the controller section without another firmware.. but it has exsl built in from what i know, ill try to put the original firmware now thanks

stable iris
#

betaflightF4 is the correct

stable iris
viral igloo
#

with the wifi right

#

i also used the plug unplug battery and it worked

stable iris
#

its not an spi receiver, it doesn't not support inputting the binding phrase though betaflight

stable iris
viral igloo
#

ok thanks a lot

stable iris
#

you also need to load the factory cli

viral igloo
#

i have backup yes

viral igloo
#

done it but it doesnt show on betaflight, ports are wrong.. damn

#

i wrote a post on betaflight forum thanks btw for all