What video system are you using? Also send a screenshot of the Betaflight Battery tab
#Battrey Voltage and OSD doesnt show up in goggles.
red depot
old iron
DJI Caddax Vista with DJI Integera
red depot
Change the voltage sensor back to Internal ADC if that's an option
red depot
Send a screenshot of the Ports tab too
old iron
red depot
the voltage sensor works
Oh yeah maybe you're right. I assumed the 0.0v was in Betaflight but if it's in the OSD then the Battery tab doesn't matter
old iron
I know i have periphals on disabled but I tried them all
red depot
What UART is the VTX connected to?
Is it UART4?
Also, go to the CLI tab and generate a support ID, copy/paste that here. Should be the leftmost button at the bottom
old iron
whats the command?
old iron
it ran through but didnt gernrate
red depot
You can't scroll down?
old iron
its fully scrolled down
red depot
Hm. Try again, maybe? Like unplug/replug then go through the process again
old iron
Hm. Try again, maybe? Like unplug/replug then go through the process again
f52821ff-9460-4c50-91d7-a0039df93d7c
red depot
What receiver are you using? Is it also DJI? Or ELRS?
old iron
ELRS 2.4GHZ. My Cinebot 30 OSD works but both my MAnta and GEPRC Mark 5 dont
red depot
Try setting the peripheral type to MSP OSD + DisplayPort on UART 4
I forget its exact name
red depot
And the VTX is for sure connected to UART4?
old iron
And the VTX is for sure connected to UART4?
wouldny my drone not bind and fly if the UART was incorrect?
red depot
No
That's only if you get the receiver UART wrong
You just won't be able to set the OSD if you got the VTX UART wrong
old iron
my reciever is on T3 and R3
old iron
they are both on 1.01. I updated them back to bind them for my other drone
loud tapir
i know they changed something about the vista with goggles 2 and integra on the latest update
try just updating the vista
red depot
If all that doesn't work, make a settings backup either in the Presets tab, or by running diff all in the CLI tab and copying the output into a text file. Then flash the FC firmware like this and make sure to remove the circled features
Usually it's the other way around though, with HD overriding analog so it might not help
old iron
i know they changed something about the vista with goggles 2 and integra on the ...
1.01 is actually thr highest I can go
I actually got it, updated firmate on BF