#Para's House. (Goodbye)
1 messages · Page 10 of 1
Connectors is the ribbon place and plugs, bottons are just thing that I can push to do a thing, what are barometers?
Also how coat?
uhh well usually 422c comes with little brushes
little ESD-safe brushes to coat it on
and then if you want you can see with a UV light how good of a job you did
barometers measure barometric pressure, a good way for your flight controller to know the altitude
won't be on the ESC
No literally wtf I do?
well i mean if you want to carefully brush it on
just spray some in a container
and then apply it with a brush
not a very handy formfactor
what store are you closest to again
should've gotten the 5 gallon container smh
Hey @fallen sable what do you think of my drone?
So time to work on the next one yeah?
Guess I'll buy the neo 2
Ordering now
Anyone know the answer to this question?
Wait I can get this shit in person?
What kind of stores
well that depends on how close you are
fpv stores
it's just a normal jst plug
don't know what size
There are fpv stores!?
It had a wire for the controllers I thought
where do you buy your parts 
The Internets
wait para why are u scrapping the whole drone
tx and rx, positive voltage and ground
and then an sbus wire you take out
I'm not
Full deep clean
And inspection
Will rebuild asap
Just getting the neo 2 to drive Emilia insane
what am i listening for
Channeling my inner embeld
Cool cool thanks.
you knew what a connector was
Lol you really didn't vibe with him huh
i did fly yesterday and it flew fine (just as bad as before) but it def makes a difference sound from the others
i actually did
and that's why i am so upset about it lol
spent hours getting them set up
answering questions
just for them to give up at the sight of an unplugged jst connector
feels like the most elaborate troll ever
it was simply impossible to fix
you can’t expect him to PLUG IN A JST
also emilia do u think rear left motor is borked?
sorry ik i already asked about this but im just not sure
I mean that does sound crusty but if it still flies and you're not going to replace the bearing
i would rip it till it falls out of the sky
Him Actually going and getting the neo was such a kick in the balls
but yea, just worried it’ll fall out of the sky onto something important lol
and their friend still is on their tinywhoop journey
literally
is it just unbalanced or something? like why wiggle
it fell onto asphalt from like 10+ stories up probably directly on the motor
because of a faulty receiver
and I haven't been able to look into it further lol
How many drones do you have?
Also what would someone need to charge a battery like this?
Also does fc die mean betaflight from scratch?
you can use your normal charger with an adapter
or get something like a vifly toothstor
not if you saved a backup!
Did I?
@solemn cairn did I?
Got it
How many drones you chew threw in your journies?
That feels like a lot to me
Would love to see some of your footage
I respect water a little bit more
Lol I died to grass water
faulty receiver
Was that preventable?
absolutely
i had had a few soft-rxlosses before
3 of them
just hadn't replaced the receiver
Soft rxloss?
briefly loses connection but not enough for a failsafe
So if I have a soft RX loss ever does that mean replace?
Failsafe activation time is only one second right
it means at least inspect it and do a bench test
So look for damage or connection fails
How test the bench?
Also do you ever sleep?
on occasion
To bad this will get lost under 10k messages lol
Your a king 👑
I added it to the spreadsheet just in case but luckily you have the big brain
I appreciate your disasters. Good to learn from
I have another drone that I don't have footage of
got blasted out of the air by an FM transmitter and splooshed directly into a big river
10/10 luck
i only do it very carefully. no crazy freestyle tricks, gps rth ready to go, landing before the battery gets low, etc
Rip
I really should setup the GPS if I wanna water walk eventually
FM transmitter
yes
Like from a car?
from a pirate radio station mast that was entirely out of wack
I'm confused how that kill ya
Does that mean I could use radios to just knock peopls drones out of the sky?
yeah lol
if you have a big mast, big FM antennas and a broken way too powerful transmitter
that somehow blasts noise around 868MHz
WTF
How prevent
this has a gps on the arm tho, why didnt it rth if it lost rx signal
step one is not living in the netherlands
Easy
was different drone
GPS on arm reasonable place
oh
i dont do it on 5" but i did that on my 7"
its on a brace between arms
i don't? Need to 3d print mount
depends
i designed my own 3d printed mount for my 5" gps
there is always more than one way to do something
422c will prevent that from happening again
i pulled a toothpick from a stream after 2 minutes and it was fine, no 422c. i dropped a whoop in a sink for 2 seconds and its completely toast
water is unpredictable
im still using the camera, beeper, and vtx antenna that were submerged in a pond for an hour years ago
above picture drone was in there for like a solid 2 hours while i walked in water in like -20c lol
What did you do to save the 2 min one
Ouch
I think the camera still worked and the flight controller was still usable
i just pulled it out of the water, set it up on the defrosters of my truck to dry out for a bit, and it was fine later that day
😮
ye
Impressive
i believe the fc survived as well but i put a whole new stack in
I would like to try and build a drone where I pick the parts entirely. Any resources or strategies to pick motors, and good stacks? Or is there only one or two best answers?
I know what to research frames, o4 always, and elrs, and props, but identifying good stack and motor I'm still not sure what is good vs bad
I don't like the skystar fc I killed. Not cuz it died but cuz it sucked with o4
as far as motors you have size, kv, motor/frame mounting sizes, and then just sheer build quality. i like rcinpower
as far as flight controllers stick to good brands
H7 > F745 > ATF435/F722 > F405/G4 > F411 or something along those lines
avoid the bmi270 gyro unless its F405/G4 or below
ESC's again stick to good brands, try going for AM32 and avoid BLHeli_32
I wanna slowly transition to the point where I have a good idea of how to identify good vs bad parts and only have to ask for second opinion instead of having you guys pick everything.
This is handy thanks
So it mostly comes down to knowing brand reputation and then making sure it's compatible with your needs?
sort of
brands can have a shit reputation but still have a handful of good products
or have a good reputation but have a handful of shit products
cough betafpv and skystars
Damn
does eachine have a single good product though?
Oops
I read it backwards
But yeah
The ev800d
surprisingly yes but none are relevant to fpv so much
lol
for the price
Oh sick
So it really is just another thing where numbers don't do it all you just gotta probe other peoples experiences, and check it fits needs
what do they make outside of FPV?
yup
and then another fun part is that there'll be batches where products just fail
No
Please
which completely changes peoples perspectives on said products
so you have to ask when!
I think heli stuff?
Woah
Airsoft and fpv have so much in common😂
Damn so if I wanna make my own drone this time I should pick parts, look at reviews, and then ask you guys for second opinions?
Why sad my dyslexic friend?
are you going to make a 3.5"?
Cause you have to watch reviews and read comments and stuff and that takes time
I’m gonna say why sad my dyslexic friend at some point Airsofting tomorrow
Sounds funny
The fleet goals areeeeeeee. Neo 1, neo 2 (pavo femto) DC Mario 5, x frame 5 inch, 3.5 inch x frame, maybe go whoop whoopy, and after all of that if I'm somehow not satiated/broke maybe a 7" cruser (only if my skill is capable enough)
could build your own neo
I have dyslexia and ur username is pain
Heheh
Define what you mean by that
Oo and a 2.5 inch I suppose
the neo is a 2" cinewhoop
and they make all sorts of cinewhoop frames
even very light ones
Yeah can you build a cinewhoop that allows camera moving and stable smartish non acro flight?
That looks so cool
you could yeah
How hard?
the camera moving part? easy
the stable smartish non acro flight? you'll need some sensors and probably ardupilot
Interesting I'll put making a cinawhoop on the to build list that sounds like an interesting project
if you don't need it to be indoors it's better to scale up as well
basically just go as big as you can staying under 250g ideally
Yeah but OOP is a huge selling point
Is sub 250 and camera move and Smartish to much at once?
i would start with just doing the camera move thing but getting a flight controller capable of ardu later on
which for the record means you only get to buy F405, F745 and H7 flight controllers and you have to check if there's an ardu target
so limits options quite a bit
Alright here's my build order plan
Neo 1
DC Mario 5
Neo 2
3.5" X frame
5" X frame
WHOOPS!
Camera smart cina thingy
7" DC finger remover
Sounds like a future me problem
lol
What so funny
no toothpick? 
Everyone knows you start with a five inch to see if you like the hobby and then work your way to whoops duhhh
What's a toothpick?
and then you only fly tinywhoops from then on
EXACTLY
That's cute
which gives them pretty cool flight characteristics
Why not considered whoop
So it's a whoop without propgaurd?
is a toothpick
Interesting
Lol
So whoops and toothpicks. Better flight without dji video system?
Analog party?
maybe a hdzero party perchance
Bleh
So if you dji on those it would be to heavy
Also would toothpick even hurt people in crash?
With props so small does guard still matter?
you can make it work with a o4 lite
yes since they can still slice you and damage walls and stuff
get in hair
Also have I asked enough questions?
I see
So if toothpick cant fly around the peoples where when would you want to fly it?
I thought that it would be to slow for enjoyment indoors
more difficult
same place as like the 3.5"
or like a small yard
I see I'm not convinced that toothpick would offer much of a benefit when 3.5 is on the build list. Whoop could be fun for inside. And x frame 5" inch for freestyle plus taking turns being broken, 7" got the long time flight down, and cinawhoop gonna cinawhoop.
I would love to not have to get another set of goggles
But if it is pain to fly inside no way around it
Also I'm failing to find a "fpv store"
Wonder if there is a more specific thing to look for
Or perhaps less specific
Stupid Country
Just think of a dumb country
And shit on it
That's my country 🇺🇸
I feel like I asked enough questions for now don't forget to occasionally sleep @soft pecan thanks for all your time ⌛ as always
what state
NY not city tho
you're screwed then
Mountkisco area
Great
anywho good night
thats what i did
my dad’s from just a lil north of there!! near poughkeepsie
also possibly nitro hobby or the hobby store. not sure if they do quads tho, u should call
don’t have much stuff built this decade tho lol
I'll call
Package included: SEQURE H743 FC x 1E70 G2 4IN1 ESC×130AWG 40mm Reverse Double Headed SH1.0-8P Flat Cable x 130AWG 100mm Single-head SH1.0-4P Flat Cable x 160mm Length 12095 5V Buzzer x 1M3*8mm Silicone Shock-absorbing Washer(Black) x 1012AWG 100mm Power Cable (black/red)×2XT60H-M Black Male Connector×135V 680UF Solid
SEQURE H743 & E70 G1 Review Video: Product Description: (1) Equipped with a high-performance STM32H743 processor, the operation frequency is up to 480MHz, offering rapid control response.(2) Adopts MPU6000 gyroscope, this FC realizes precise gesture sensing and stable control, improving the reliability of the syste
These last 2 links
Is it good or for the hood?
do we even know for sure what's wrong yet?
Yeah the fc is fried
Yes but I'm looking into this stack for the next build
damn! another one?!
para has bench stokholm syndrome
i think im just gonna stick with my 3.5" and 65mm
Bro got a lifetime supply of 422c
And yet I die to water grass damage
Cuz I forgot to use it
Guys I have a problem stop pingging me✋
@gaunt creek
I'm turning off my phone
good
@gaunt creek
just had to check huh
it’s ok to use loctite on tmount prop screws right
sure
going to ask in advance, why?
I swear, I wasn't 100% sure if you had it but iirc you bought one at the beginning
didn't want to sound dumb and ask but yeah
anyway, you can practice diagnostica and soldering
it attacks the plastic from the prop
they can literally just explode
yeahz not suitable to happen mid flight 
What is practicing diagnostics
There's more people and messages in this one forum thread than in some active servers I'm in
Good
One day I will evolve into answerer of questions
shork
And this channel can basically become help-quick-questions-with-ADHD
Couldn't have said it better myself
It was fun discussing skirts and thigh highs at 3 am with ya yesterday
yup
Big nos
cool
lmao
not sure if its the right word but I meant like figuring out what is wrong with your drone, if the parts are fried and which one it is and so on
Rainy?
It's a meh FC
purely because of the fact it has no pads for anything
other than that it's pretty great
I see at least two or three pads there
maybe more
oh okay but where are the pads for any of the things the connectors go to
and for the record this has been a problem for the two times I have recommended this thing now, I'm not just randomly complaining
the connectors offer extra pins, the only important thing that I would consider necessary to be on both pads and connectors is the analog VTX output, which is broken out with both
i mean that's interesting for you i suppose but people tend to need more than that broken out
I2C is broken out with both, 10V is broken out with both
and i wouldn't say uarts that are only seen on connectors are extras
There are 4 UARTs on pads alone, that's more than enough IMO
i mean so far that is 1/4 people i have seen that don't have a problem with that
You've recommended the stack before, I was a little surprised that it's suddenly meh
What were the other complaints?
it's good other than those pads just not being there
I don't even remember
@hallow oriole
I'm also coming from the perspective of not understanding why they don't have the pads for those there as it feels like they easily could have to me?
The USB port is a valid point of criticism, I'm not too happy about that. But the pads aren't an issue at all IMO
I know they would be for me, I know they have been for Jason
so it deserves a mention
I don't understand how they would tho. There's 4 UARTs, I2C, Buzzer, Analog in/out, CC, 5V and 10V all with pads
that's more than enough for any kind of regular setup where this FC would be used
It's not an FC that's specifically made for complex setups... it can accommodate them, but that's not the main point of it
also why the fuck does this only sell for $30!!! https://sequremall.com/collections/fc-and-esc/products/sq-blueson-a2-esc-am32-blheli_32-128khz-4in1-esc-forfpv?variant=44706874163388
Product Description: (1) High-quality ultra-high copper thickness PCB ensures the current carrying capacity while improving heat dissipation. Equipped with top-level MOSFET, it enhances flight performance and makes you enjoy the fun of flying in the air.(2) Equipped with a high-speed 32-bit processor, it supports full-
that's mad

i could just grab a esc for the funzies cus its dirt cheap
matt has one
to be clear it is a new ESC, I haven't seen it before and it probably hasn't been community tested as much as the existing one, but... hard not to impulse buy
oh yeah I do remember now... okay, 2nd time I've seen it #🥽fpv-drones message
I would have more use for a 20x20 ESC rn tho, got a bunch of 30x30 stuff laying around
may have to bother the Sequre engineer/rep if they have new 20x20 stuff coming
What is wrong with the USB port?
Only surface mounted
Would you say I should not get it or it still cool as a cat?
It's fine
IMA gonna get it
Two Flight modes: Normal and Sport The throttle lock function can be canceled in S2 Independent Gyro gain adjustment for pitch, roll and yaw Basic setting includes stick countering and ESC throttle calibration Blue and red LEDs for working status The GT Power S2 Multi-copter Control Board supports these multi-copte
Curious what would be your first choice for 5 inch stack
That strongly depends on what I'm after
Freestyle?
Idk, I had SkyStars desync recently. Only happened once tho, lucky I was not over water. I don't trust it as much as T-Motor so far
Any ESC can and will desync given an incorrect setup/bad situation
it's not an inherent hardware fault
sky stars is bad do not the buy
Skystars is nice
I'm not all caught up, but... did you smoke the quad?
Smoking a quad sounds hard
Don't inhale the quad
they crashed in wet grass
soaked the fc
plugged it in a few times while soaked
fc died
well no that wasn't the problem with the fc
wait so i’m confused i’m getting mixed messages. loctite on t mount screws or not
this basically was
absolutely not
loctite eats plastic
do not put locktite anywhere near plastic
hmm
is there a good way to remove loctite from screws?
all the ones that i have came with it on them
alcohol is truly a solution for everything
ok
did not fix my FC
do you know why they’d ship all the screws with dry loctite on them?
didn't help that one dude
just drink so much that you forget your fc had a problem
is he still muted?
he got banned
oop
he got way more chances than reasonably anyone else would get
yeah
wait who is this?
fish
it's insanely easy not to be racist/*phobic/whatever
ya he totally deserved it
not if youre brainwashed enough
and probably could’ve been banned much sooner lol
thoughts on this?
i’ve been using the screws with dry blue stuff on the for t mount since i got them
yeah
you think if i scrubbed it with isopropyl alcohol and a wire brush it’d come off?
look at all the drone categories at the bottom lol
only a few
here is the second half
eta wen
when what?
fix 5"
finnnne
yeah still never convinced me the value of toothpick
something you'd have to try i suppose
but 3.5 inch would fly same spots and whoop can kamakazie into peoples
i’d just be scared i’d break a toothpick
weight offsets\
they did get conformal coating
I’m-
didnt use it tho
Only US$199.99. Shop for HOTA F6+ AC/DC AC500W DC250Wx4 15Ax4 Smart Balance Charger for Lipo LiIon NiMH Battery at Banggood.com. It is a high-quality charger with advanced features.
product review what yall thinks?
seems to not have a great built in power supply
but they do seem to replace it when the power supply breaks
so
what would you pick for 4 charging at a time
normal hota f6
mind linking me up
(which is what I did get lol)
uhh I got mine on AliE
and the store I got it from doesn't ship to the US anymore
so
https://pyrodrone.com/collections/chargers-1/products/ultra-power-up9-ac100w-dc200w-quad-channel-ac-dc-smart-battery-charger what about this
The UP9 100W/200W AC/DC Four Port XT60 Multi-Chemistry Smart Charger is a fantastic choice for hobby enthusiasts with many batteries. The UP9 can charge up to 100 watts total on AC power (CH1+CH2+CH3+CH4=100W), and up to 200 watts total when using an external DC power source (sold separately). Each charge channel suppl
not really any good
especially for that stupid ass price
a hota f6 will be like 90 bucks without tariffs
like here
yeah just saw your link thanks
Silly question what is ac power supply and do I need it
some random one i found
ina box
how portable do you need this to be
I don't know what it means
how portable do you need the charger to be
does it need to stay small setup wise
do you want it to be compact setup wise
Two addon option
ac power supply takes wall plug and makes it into usually 20v dc so your charger can charge
answer the dang question
Ahhh
Does not have to be
okay but do you want it to be
Charge at home is okay
So if you get both addons you can charge on the go?
And at home
i don't know what that site adds as addons
it's basically a site run by like one dude to sell his setup
And plug in ur pincel to solder on field?
but it isn't well known enough to be sold out of these on a pre-tariff price
the first options adds this https://flyhighfpv.com/products/stay-high-field-charging-pack
The Stay High Field Charging Pack - "When you need to stay high all day" It's 6S and 15,000mAh, capable of delivering a continuous 30Amps. Weight is 1.3Kg. This is the Field Charging Pack I've been dreaming of! This can easily charge 12.5 of my 6S 1300mAh packs, but only weighs as much as 5.5 of those 1300 lipos, so
which is just a big 21700 pack, you can do better for way cheaper
So get the second addon and find cheaper battery elsewhere
you can get 1200W power supplies for like 50 bucks if you look on ebay
or 500W meanwell ones for 50 bucks
instead of presumably a 240W power supply they're including
So get charger and then battery and power supply elsewhere?
unless you like the included power supply they're offering yeah
And what would a higher W power supply do for me?
depends on your future plans
I that bats can only charge so fast
if you ever want to charge a really big battery
or more than 4 batteries at once
240W might not be enough
Gotcha
I'm looking at pyro and I'm not seeing anything cheaper at 15000mah
it takes like 33 watts to charge one 6s 1500mAh pack at 1C
so charge 4 6s 1500mAh packs at 2C and that 240W power supply already isn't enough
for the field charge pack there comes another multiple questions right
always keeping you busy thats my goal
Would you rather:
- Buy the 333 watt-hour pack for 200+ dollars
- Make your own spending AT MOST like 110 dollars in cells, a mildly expensive spot welder (100-200), learn an entirely new skill and spend a few hours making it for the first time
- Sacrifice size and weight, but buy like two LiFePo4 cells for like 50 bucks max with wiring and hardware.
i see
the 333 what hour thing is the first addition in the charger yeah?
so what about first upgrade and find powersupply elsewhere?
wiring and hardware?
yeah for the lifepo4 cells you'd need like
isnt option 2 dangerous?
two or so bus bars, a few nuts, if you wanted a balance connector, some wire to solder an xt60 to
im in over my head here
no because presumably you would learn how not to be dangerous
also I believe the packs on that site are from here
GFHGJBLUGLDBIKWUDB 4000 DOLLAS!
if i dont care to charge more than 4 240 W should be more than enough right?
but only if i make one?
or use 2 small ones?
nah its too expensive i think charger+ac and I can figure out field charging later
unless 240 W is too limiting in your opinion
only if you make one, use a different bigger cell, or slightly cheaper from like gnb
i think i may learn the new skill at a later point and stick with charge at home for now
yeah either that or buy a more powerful psu from ebay or something
honestly for field charging if you’re not flying somewhere super remote u can usually just find an outdoor outlet
i just bring my hota t6 with me since it’s tiny
yeah but then you don't get to hold a huge battery
im looking for psus on ebay rn
i do like large batteries
like 12v 1200w or 2400w ones
and then there's cheaper name-brand ones like 500w or 600w meanwell power supplies
all varying in size
wtf am i looking at
you could use a computer psu but that's more difficult to use than for example the first meanwell in this image
i know the meanwell looks very scary but it's really simple
for the meanwell you take one of these friends
you stick it in the right order in the right 3 slots of the meanwell
and then you stick an xt60 in the ones labelled 12v
😵💫
it's your call, i don't want to force you to learn all this crap
I like learning but I wanna focus on the sky for now
Maybe I take easy way out for now and then expand skills later
very much can
Yeah so charger plus the 240 psu for now and come back to it later I think is my plan
Unless you see a higher W PSU brainless option
i am a little concerned it says restocking
lol
that's probably the one in the options
I cant just buy a ready to go higher W PSU?
I am sure there is one for some absurd price? but even the ones you see on other FPV stores end up just being like the meanwell PSU but some random off-brand with a wall plug and xt60 included
@gaunt creek im not sure what size pack youre making for for smaller packs you can solder to 18650s and 21700, i just built a 4s1p yesterday with no welding
jason is disowned
What
it's where you solder directly to a bare cell and damage it
Not true
Not if you do it fast
Lol
it's risky
Is anything in this hobby affordable and simple?
But the cells weren't the slightest bit warm when i did it, only took maybe 2 seconds a joint
only if you compare it to other hobbies
Affordable is always relative
If it was simple everyone would do it and it wouldn't be worth anything
Okay ordering the carger and AC now
The Pacer V3 line of motors is specially designed for freestyle. You will enjoy the precision, efficiency, and reliability of this powerful freestyle motor. Available in two KV variants 1750KV for 6S, 2550KV for 4S, and 2080KV for 5S-6S. Check out all our 22XX Motors and the rest of our T-Motor Products! Increase the l
for a 5" any opinions?
im gonna take that as a full approval
not very pretty
i meean that's a pretty big problem
Lol what would you get that pyrodrone has in stock
also 30 for a normal motor is absurd
fuck you mister felon
that motor is supposed to be like 23
anyways they have tons of good motors on pyro
In stock?
yeah
I wanna get 5 high end deluxe super motors for 5"
why is there choices
don't bother
just do 0
just don't add it to your cart at all
so
shipping providers they have
included insurance
most ones like fedex, ups, dhl they handle claims pretty easily
the reason pyro has that on their site is because USPS does not tend to do shipping claims very well and it can take a long time
i would personally not bother with having third party insurance, and if you're worried just upgrading from USPS
it auto adds but i noticed i can change price
none of these are "better" its just looks?
oh I mean I am sure there are better ones than others
all the expensive ones will be quite durable as well
but the question is
will you notice?
i really wanted this https://pyrodrone.com/products/rcinpower-gts-v4-2207-1960kv-brushless-fpv-drone-motor-black-gold?srsltid=AfmBOopjL-lLumNzIqa9U7wbQ_CzQNDv8U-gbeV2SYEDfvj1O_EjX_hO
The RCINPOWER GTS V4 2207 1960KV Brushless FPV Drone Motor provides the perfect balance of power, torque and efficiency for high performance FPV drones. With a max thrust of 2 KG and quick acceleration, this motor offers stability and durability in even the toughest of conditions. Its innovative design and durable comp
cant find anywhere selling it tho 😦
they look cool right?
oh yeah rcinpower gts are cool
know any sneaky stores i might find these?
Never shopped from aliexpress before
What is the deal with ali
it's a marketplace
so like ebay or amazon
where a bunch of stores list products on it
and then the store front/platform itself handles the payment/sometimes aspects of shipping/customer protection
I can just trust this and buy now!?
Why were people shitting on ali this shit looks great
usually from a lack of understanding what aliexpress actually is
check the store's reviews first
because ali is gonna scam you and sell you fake china motors and sell all your data
that sounds like amazon
You say to be honest that implies problems
china doesn't like money or something
Can I do it!? Can I do it?
I want these motors
step 1
look at store. kind of shitty rating
let's check why that actually is
credibility is good enough
9 negative reviews is not fantastic, but none of these reviewers actually knew what was going on
TL;DR it's an okay store that might screw you over with stock but likely won't, and you can just call the alie police if they do
Sweet thanks for teaching me a ton
I'm gonna buy em 🤑
That's a while
To bad IMA buy them
yeah uncharacteristically long
For drone number 5
oh also
in the same like vein of this
brands do have official stores on it
like you can find radiomaster official store on there
cnhl official store
many official stores
geprc
whatever
which tends to mean extra protection as opposed to ordering it from said brands own website
1960kv or 2040?
what's the goal of the drone
Freestyle
what flavor
Spicy
A mix of both
Fine 🍪 don't tell @brave moth
thanks and aight i wont tell @brave moth about it
oh and the aliexpress search sucks
it's like something you have to learn how to use
it never listens
ask it for 20mm and itll give you 200 fr
but i guess that's what amazon and stuff are like nowadays too lol
amazon is lowkey good in australia
eh amazon has always kind of sucked in the netherlands
it only got introduced not too long ago
and we already had like an amazon-esque thing that was better
so now they just fight and it's sad because like fuck amazon, let us keep our dutch company
potentially both at this point
dang'
If you can still see the floor then there's not enough Blahaj
Also I want them, it must be so fun to be able to swim in an ocean of blahajs

it's just an o4 pro
there's no size, there's no frame, there's not really motors
You'd need to pick a size first
so apart from missing almost everything, its complete
Both
whats gonna be the drone 2 size?
does that mean under 250 grams
Just make 2.5 inches!
so youre building a 2.5"?
so whats the size of nr 2
The neo is number 2
how are you building a neo
Drone 3 is is the neo 2 (Pavo femto)
Drone 4 is 3.5 inch
Drone 5 is another 5" just for good measure
Other than the total section look at this
https://docs.google.com/spreadsheets/d/1stqDDwoMiFmqRTxziLsiQ7YnWge8gvOoavo88aX3eKY/edit?usp=sharing
dud are you rich or something
Total section is under repair
Or something
No just lots of jobs

Literally took on extra hours specifically for this
I want to fly
And being grounded sux
I need 7 drones so that does not happen again

After taking extra hours I have another secret weapon 🔫 @unreal cargo is paying for almost half
I used to play thousands of thousands of hours of video games. After giving that up I have had a major void to fill

guys... i added it all up
erm
impressive
I'm somewhere between 2-2.5k with my 3 analog quads
it's because dji
lol
kill me
I wonder how deep I'm in, I'm scared of actually adding it up
No
I dun want to get depressed
yeah I'm also too scared of actually adding it all up 
I'll stick to my estimates
Well, I have a rough idea, but I also know my estimate is based on numbers from 6 months ago and I know it's much higher than that now, but I don't know how much higher and I don't really want to find out
1/3 of my air units I got free or next to free.
1/3 at a great discount.
So that means the final 1/3 I bought at full price I can not think about the costs.
😏
I should also go threaten divimath for free vtxs
That will make my life much less painful
Free parts from working in the industry, doesn't offset the low pay and next to 0 benefits.
Sadly.
Better off having a "real job" and just paying full price for RC shit.
By curiosity, how much money is there in fpv (like profit manufacturer side) ?
Feels like depending on who you look at it's either zillions or pennies
Get FPV seems to do alright in terms of their margins on their branded stuff.
Also they r doing/did well in terms of warehouse expansion and getting larger.
But also IDK how much of that is just FL being easier for certain business actions.
They (getfpv) were exceedingly leery about paying a few extra bucks for a employee, cuz:
"well getfpv could almost get 2X FL employees for that cost."
Also their cybersecurity is a shitshow and system of VPN half made back doors and was begging for abuse.
Found out later on that apparently a pilot I know when in young and dumb in HighSchool just fucking around.
Found their way into GETFPVs system and issued themselves like 10,000$ worth of gift cards.
They didn't even notice till they bought shit with the cards lol.
i tend to not be able to get on getfpv's website anymore
they have the cloudflare protection way up to where each click is a captcha or it just blocks me
Then theres NBD.
Which isn't a real business nor cares about anything.
DGAF labor laws.
Warehouse safety laws.
Item defect rate.
Theft.
Lost orders etc.
They don't care.
All that's important to NBD is that the rich family $$ trapped in china, gets turned into $$ in USA at an acceptable transfer rate and speed.
Legally you can only move so much $$ per year as $$ out of china.
But you can make all the drone parts you want and sell them overseas.
NBD is just a vechile to move money, not a business.
So long as the transaction is operating at an acceptable loss/transfer rate.
They don't give a shit about anything else.
But they r in denial about that so.
🤷♂️
well that's interesting
Oh man.
I had to use tinywhoop.com on a actual PC to order the other day.
Cuz the catchpa would not load on mobile (even requesting desktop page.)
So I was unable to login and checkout till I went to a actual PC.
I should probably email them about that let them know.
@fallen sable https://docs.google.com/spreadsheets/d/1stqDDwoMiFmqRTxziLsiQ7YnWge8gvOoavo88aX3eKY/edit?usp=sharing
look at the spreadsheet its done
lmao
@soft pecan @stark flower @shadow bolt @soft pecan @split lichen @brave moth @hallow oriole @tropic wyvern @solemn cairn
huh
lmao
we are proud and ashamed
God the bullying is about to go crazy
look at it lol
Nah
fr
please dont interrupt my blahaj cuddling sessions
LOOK AT THE SHEET
the haj
the haj in question

at least like pick a fancy brand if you're going 35a aio https://holybro.com/products/kakute-g4-aio-35a
what did you do to him 
freakhaj

it didnt fit me and i had to carry it somehow
so what u guys think of the spreadsheet? 😉
so pretty right?
expected
Why me not pinged
We need a Kirby role fr @soft pecan
you already have yapper
you've had it since last time you asked and it kind of became a
"how long till they notice" thing
weeks apparently
<@&1266954578708922490>
@soft pecan I want a special role! what do i have to do? ive been super annoying I could ramp it up!
plz plz plz
Yap
see this is why we remove the yapper role
wait crasher got yapper?
you get the muted role 🔥
sweet!
What did I get pung for
Existing
what 😦
but but i made a whole new discord server in the discord server
i can take em 
99 messages till 10k messages
why did I get added to this shit
Why are you like this
Im proud of the spreedsheet
historical reasoning or something 
what
yapper role
what
kbye
/mute
10k is so close
we have 42 people who suffered pain!
we need to get that to 50
also para is cooking up an essay
or is sleeping on a keyboard
oh hell yeah
i wasnt pinged tho 😭
para could you ping me too :3
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
thaks kind person
we have another one!
i mean aaaaaaaaaaaaaaaaaaaaaaaaaaaaa is good... but what bout bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbb is the real shit yk?
Heheheha
Is this hypothetical? I hope it's hypothetical
but! i dont have to worry cuz i dont have 4k!
move to a state that doesnt ban drones
Oh I see. Are you near the border of the state? If so might be worth keeping it around
Might be able to fly whoops inside
lol
Or find a rich dude with a giant hangar and fly in there
Like it might be a bit of a trip but if it's drivable you could make it a weekend trip or something idk
Damn Para's been typing forever
i mean... frias still exist no?
We are close
I'm 30 minutes from the nearest big town 💀
30 minutes is nothing
50ish messages away
All that typing just for that 😭
No lol
Message is ready
1
23
45
67
8
9
It won't count
Those are some of my favorite numbers
What won't?
Tell
Me
In
Detail
Hello night eagle
How
Is
Your
Day
Going?
speedrunning 10k
Yup
https://www.faa.gov/uas/getting_started/b4ufly
There's a couple others too, I think they all track frias
smh let it happen naturally
The mods delete the thread
Cookies
Noooooo
lmaoo
Monsters!
...

again?
12 msgs more to go
suck it
Ban
pack it up boys
I locked it for a little while, you'll take a break thanks to @unreal cargo
don't ping mods for no reason, what did you expect
you knew what you were doing since it was taken down almost instantly
be free
YAHAHA
yay!
Who needs social media when you have geometry dash daily chat
thanks god
Time to ping @ mods fr
that place is hell
wait does @mod work
Do it
You should combine them
Wait
No
Spell out "moderator" with an @ infront
wait you actually can ping just the role?
lol guys
Yeah for scammers and stuff
yes, so that we can deal with IMPORTANT stuff QUICKLY
