#Para's House. (Goodbye)
1 messages · Page 3 of 1
I know I just wanted to pad the sent messages 
ok im gonna lock in for the next 25 minutes
4 pieces left right?
Did you want a GoPro on it too?
Motor, Reciever, strapon, battery, bepper
Do I?
Idk ¯_(ツ)_/¯
https://pyrodrone.com/products/radiomasterxr3-nano-multi-frequency-antenna-diversity-expresslrs-receiver-choose-antenna
https://pyrodrone.com/collections/receivers-1/products/radiomasterxr1-nano-multi-frequency-expresslrs-receiver-choose-antenna-1
https://pyrodrone.com/collections/receivers-1/products/sequre-elrs-2-4ghz-single-rx-single-antenna-tcxo-high-refresh-rate-low-latency-receiver-w-ufl-antenna
https://pyrodrone.com/collections/receivers-1/products/geprc-elrs-nano-2-4ghz-pa100-receiver
5 I forgor beeper
Thank you! You can have my first unborn child
Why is it so cheap?
i sent u 4
Oh these are different links
You can have my first 4 unborn children
because elrs
Not really for diversity
still is for diversity
normal diversity should be 15-20
gemini is like 18-25
gemx is like 25-30
Diversity is when you have two antennas so that you can have better range
range = horizon
the 04 is the limiting factor
Plz don't tell me 04 pro is bad 
no elrs is just really fucking good
Oh thank god I was about to have a stroke
hi jason
We r at 2k messages now
So a any of these recievers are good then
Are you sure
Pretty much
?
You should check again
Oh
Please tell me all about it
And how makes you feellll
And what's your favorite color
For the buzzer you probably want a vifly self powered buzzer
K I'll look around
For batteries 6s probably 13-1500mah
New Vifly Finder 2 5V Super Loud Buzzer Tracker Over 100dB w/ Battery & LED Self-power for RC Drone Vifly Finder 2 5V Super Loud Buzzer Tracker Over 100dB Built-in Battery & LED Light for Flight Controller RC DroneSpecification: Brand Name: Vifly Model: Finder 2 Item Name: 5V Buzzer for RC Drone - Built-in Batt
This cute right?
That is not cute
Ya
For motors you could look at xing 2 motors I think they come in 1855kv
oh you probably also want a smoke stopper
I don't smoke
haha lol its so your drone doesnt smoke
I never heard of a smoke stopper @soft pecan is this a real thing??¿
This is the second iteration of the ShortSaver! With power on/off switch for easier receiver binding and a button to adjust short-circuit and over-current trip time. Check out all our Electronics and the rest of our ViFly Products! Completely cut off the current flow and prevent “magic smoke” For other smoke stoppers l
it cuts off the battery when a certain amperage is reached, like a reusable fuse
so when your drone has a short somewhere it stops it
Should I?
good to have
How will I fit all this on the quad
this is only for building the quad it doesn't go on the quad
its to check for shorts the first time you power up
yeah its not critical, but it helps prevent unnecesary spending lets say
because you only use it when you power up the first time
its to prevent you from frying your esc or fc if you solder it wrong
I would never 
||||I will definitely buy this||||
Got the buzzer
Motors, batteries, and bat holder
Almost there!
... I think
how about motors
worken it
make sure theyre 2207 size
AxisFlying C227 5 Inch 2207 1960kv 6S Cinematic FPV Drone Motor is the Ultimate Cinematic Tool. With its strong 2207 6S motor, the AxisFlying C227 turns your drone into the perfect cinematic companion. This motor delivers exceptional power and control for capturing stunning aerial footage and creating cinematic masterp
slightly pricyer
idk
getting better at findin stuffs
how did you guys figure out what is to high kv?
is it tied to the esc?
Premium performance: That's been the focus of AxisFlying since we started a year ago. The AF series, and the BB series. We pushed the envelope of the tried-and-true FPV formula. Now we'll be doing it again… with a twist.Introducing AE series, by AxisFlying. Great performance, high quality, and the high standards that w
Look at the datasheet. A higher kv draws more amps at the same voltage. The axis c227 motor can draw 40a at 100% throttle. Your stack is rated for 45 amps. So that’s a bit close
Yeah it’s tied to the esc
Make this your pfp
Do either of these motors I picked look good to y'all?
JB compared some of these motors https://www.youtube.com/watch?v=-8KwB3nEt8I... I'd probably go with the ae2207 motors out of those two. but it doesn't look like those are unibell (supposedly more durable)
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
My main channel: https://www.youtube.com/c/JoshuaBardwell
Heck guess I'll keep looking for motors if y'all see any you like or can vouch for let me know
are you looking for more budget motors (like $15 each) or more premium motors (like $22)?
I'm looking for what works, is in stock, and is on pyrodrobe
Under 30 sounds fine to me
Ive been using t motor velox
Not unibell but they work
As long as theyre decent quality, motors are motors
Imo
ive heard good things about them but havent used them
They haven't given me an issue yet and thats all i can ask for
do you run them on a 6s 5"? if so, what kV?
1950kv 6s
This frame has been through everything, including falling into a pond, and I just keep replacing the electronics. Here's it's first built from 2019 https://rotorbuilds.com/build/15284
The FPV Cam is an old Falkor, I don't believe my product link matches it exactly.
2207.5 is fine
Sweet
This is 1950
That's hot
Yeah 😂
Alright battery and strappon that it?
you probably want a 6s battery that is probably 1300-1500mah
I I'll look around
they should be around 20-40$
Per?
#🧾shopping-advice message
per battery
you probably want 3-4 at least, each battery will only last for about 6-8 minutes
Attention FPV racers! We at SMC have listened to you. We went to the drawing board and came away with a new formula to deliver the performance you demand from your FPV race packs. Check out all our 6S Batteries and the rest of our Batteries Collection. Specifications: mAh +/- 5%: 1400mAh Voltage: 22.2V Size: 36mm x 39m
This one?
These?
looking at the spreadsheet, are you actually gonna get the vest?
No
Lol no
The new GNB Flight packs have 160C High Discharge rate and suitable for Racing or Freestyle Checkout all our 6S Batteries and our GNB Battery collection! Specifications: Model No. GNB14006S160A Capacity 1400mAh Configuration 6S1P Nominal Voltage 22.2V Dimension 403880mm Appr. (HWL) Weight 233g (+/-7g) Max cont. dis
GNB lipos without decals have worse cells
that?
Discover the Dogcom brand and its high quality and stable Lipos batteries. Here is the SBANG Version with a new discharge rate of 160C. Checkout all our 6S batteries as well as the rest of our Dogcom Products! Features: High & stable quality, Lower internal resistance, Longer life cycle. Higher capacity than compa
https://pyrodrone.com/products/gaoneng-gnb-6s-22-8v-1300mah-160c-hv-lipo-battery-xt60 these are newer
GNB's newest battery line is their new 160C high output low weight batteries.Checkout all our 6S Batteries and our GNB Battery collection! Specifications: Capacity: 1300mAh Voltage: 22.8V Cells Configuration: 6S1P Pack Dimension: 353882mm(HWL) Net Weight: 198g (+/-6g) Discharge Rate: 160C Charge Rate: 1C to 5C Disc
ohh the hv ones
I can’t talk about those
y not
I’d get a few 1300mah and then one 1500mah to see which you prefer
Becuase I don’t have experience with them?
how many total do you think he should start with? 4 total?
Maybe a few more
Isnt bigger mah just better?
No
heavier
More mah = heavier
So there’s a balance
1300 is a really good middle ground
Maybe do 2 and 2
2 1300mah and 2 1500mah
Why 2 and 2?
Decide for yourself
Could also do 3 1300mah, 1 1500mah, and 1 1700mah
Since you are super rural and cruising oriented
Defo try a bigger one though
Bigger means less tricks but more flight time?
What
It means it’s heavier
More weight
So less zippy
I personally prefer that heavier feel
But 1300mah is a good middle ground
That's what I thought
I’ll let you decide the mah counts you get
How can I figure out flight time per battery
it really varies depending on how hard you push the battery
I want to know the ratio between 1300 and 1700
Is it just that? 13 to 17
If I fly in straight line with both will 1300 give me 8 minutes and 1700 give me closer to 14 kinda deal?
well by math a 1700mah battery is 30% bigger than a 1300mah battery. So if 1300 gives 8 minutes, a 1700mah will give 10.4
but if you had 2 1300mah batteries, you could stick the other one on the charger
Only if I'm at home no?
yeah, unless you had some sort of ac power supply to power your charger
I'm leaning towards 3 1300s and on 1700mah
No
What
It’s not linear
oh thats true because it weighs more
It’s prolly closer to 5-6min on a 1300, 6-7 on a 1700
And it’s just not linear
Yikes thats quite small
Just buy multiple
K
Lol I'll just get one battery
This battery made with Samsung 21700 40T Li-ion Cells, it is compatible with 7 inch 300mm-380mm FPV, Long range drone, Chimera7 Pro, Crocodile LC75 V3, RC Airplane, MultiCopter, RC Hobbies etc. Checkout all our 6S Batteries and the rest of our GNB Battery collection! Specifications: Model No.: GNB80006S10R Capacity: 80
How do y'all feel about tattoo?
The new GNB high volt packs have high output 120C discharge rate and suitable for Racing or Freestyle. The extra voltage increases the capacity of the battery while saving weight compared to an equivalently sized non high volt battery. Available in 4S and 6SCheckout all our 6S Batteries and the rest of our GNB Battery
I'm thinking one of these
GNB's newest battery line is their new 160C high output low weight batteries.Checkout all our 6S Batteries and our GNB Battery collection! Specifications: Capacity: 1300mAh Voltage: 22.8V Cells Configuration: 6S1P Pack Dimension: 353882mm(HWL) Net Weight: 198g (+/-6g) Discharge Rate: 160C Charge Rate: 1C to 5C Disc
And 3 of these
Never mind the 1850mah is out of stock
tattu r-line? I just got some
They serving you well?
haven't arrived yet lol
Worst thing ever, absolutely shit, never buy
||jk, wanted to scare the other guy, I’ve heard good things about them||
haha lol
Meh, I have a couple of them but I don't like them, idk why I keep buying them
They're the only ones available at my local store lol
The 4S ones are okay, I use them on my cinewhoop and it flies fine, but the 6S one I got for my 5" is just not powerful, it sags very much
I thought it has a quad issue (first quad I actually built myself completely from scratch, picking parts and all) but then I tried a friend's GepRC battery and I was amazed that my quad flew better and longer than with my more expensive Tattu pack
Is the 6s one r-line?
No, funfly
R-Line seems fine, I have a friend in Belgium who has one and when I flew his quad back in August as far as I can remember it flew great
Clean and remove residual solder from your soldering iron tips without water with Weller's Soldering Brass Tip Cleaner with Silicone Holder. Simply plunge the iron tip into brass coils that clean, prevent rust and extend tip life. Increase tool safety and stability with the slip-resistant silicon...
this good clean thingy?
Looks fine
and the tip that comes with this is gucci right?
id get a bc-2 aswell
would you use just the bc 2 or are there reasons for differnt sizes in quad building?
Bc2 is good for bigger pads because of the high surface area
gotcha
The 8351 No Clean Flux, Halogen Free is designed for lead free alloys and is also well suited for leaded alloys. Because it is low solids, this organic flux leaves virtually no residues so that the board appears cosmetically clean after exiting the wave soldering machine. It is specially designed...
does this look tasty to you guys?
that bad huh..
looks good
get some kester/mg chemicals solder if you ned it
also what happened to having friends soldering gear
Running out of excuses to procrastinate on choosing bat
I have that option but you advised getting my own at some point so I wanted to have it all lined up but buy last
Smort
Bruh
3 Gnb flower 1300mah
2 1500mah
Bam super easy
That's me 
I found it
The new GNB high volt packs have high output 120C discharge rate and suitable for Racing or Freestyle. The extra voltage increases the capacity of the battery while saving weight compared to an equivalently sized non high volt battery. Available in 4S and 6SCheckout all our 6S Batteries and the rest of our GNB Battery
I think
The new GNB high volt packs have high output 120C discharge rate and suitable for Racing or Freestyle. The extra voltage increases the capacity of the battery while saving weight compared to an equivalently sized non high volt battery. Available in 4S and 6SCheckout all our 4S Batteries and the rest of our GNB Battery
Looks good
And this
That was 4s and the 6s is out of stock 
The new GNB high volt packs have high output 120C discharge rate and suitable for Racing or Freestyle. The extra voltage increases the capacity of the battery while saving weight compared to an equivalently sized non high volt battery. Available in 4S and 6SCheckout all our 6S Batteries and the rest of our GNB Battery
The "Yellow Label" 100C/200C lipo batteries from GNB is their new light weight line. These packs have same great performance and quality that you would expect from GNB but feature a plastic protection plate instead of the conventional aluminum or fiber glass.Checkout all our 6S batteries and our GNB Battery collection!
Found a pricey alternative
So sad 😢 right?
GNB's newest battery line is their new 160C high output low weight batteries.Checkout all our 6S Batteries and our GNB Battery collection! Specifications: Capacity: 1300mAh Voltage: 22.8V Cells Configuration: 6S1P Pack Dimension: 353882mm(HWL) Net Weight: 198g (+/-6g) Discharge Rate: 160C Charge Rate: 1C to 5C Disc
GNB's newest battery line is their new 160C HV output and low weight batteries.With the quality GNB is known for and only 223 grams you really can't go wrong with this pack! Checkout all our 6S Batteries and our GNB Battery collection! Specifications Capacity: 1500mAh Discharge Rate: 160C Continuous Dimensions: 80mm x
charge it at 1C btw
1500mah works for now
Idk ¯_(ツ)_/¯
K
sorry got too angry
Lol I don't mind.
Sorry if I'm actually bothering you I can try and chill out. I value and appreciate your opinions so I ask lots of questions
Just remember if you ever get sick of me you can tell me to Google it. 
1300 is probably fine, i use 1200 lol
thats 1300mAh, so 1.3Ah, 1c would be 1 X 1.3Ah= 1.3A, so thats your charge rate. for 1500mAh, its 1.5a
Well I'm compensating for something so I like bigger numbers
I do that I'm gonna go mock 20 into a tree
welcome to the club
Bat strapping
I don’t know much about options for battery straps… but i think the only thing that actually matters is the length?
So just a bunch of these
Easy enough
Lol
metal buckle
Why can't anything be easy
this is easy
This is why I need you guys
just find any 250mm with a metal buck;le
The best strap in the industry just got better!This is our same strap that we include in order for free, this version just got upgraded to KEVLAR STITCHED AND METAL BUCKLE!The metal buckle is NOT the same one you see on other overpriced kevlar straps!This buckle is ONE PIECE and does not have any meeting points or even
There first try (:
I picked this based on @soft pecan s wall of text did I make a stupid mistake again?
The perfect combination of thickness, Flux percentage and Alloy/Tin to give you the shiny and clean soldering results when used with our TS100 or SQ-001 soldering irons.Also available in a 15Gr. pocket pack size.Chekout our full collection of Tools & Building supplies Specifications Wire Diameter: 0.8mm Alloy: 63%
Its leaded and. 8mm
for the record I got mad over the other strap because I have a very similar strap and it pisses me off so much
Understandable did we do it!?
Is this the last part
We have everything? ¿
I think we won! 🎉🎉🎉

You can't think of any random niche thing needed?
nah, ill think of it right after you put in your order
https://docs.google.com/spreadsheets/d/1stqDDwoMiFmqRTxziLsiQ7YnWge8gvOoavo88aX3eKY/edit?usp=sharing
ngl an extra pack of prop nuts is like 3 bucks and if you ever drop one youll be happy you had extras
i like the low profile ones for 5" and you can get pretty colors
Your crazy if you think I can afford this shit
Its gonna be a bit
Sounds good
Now I can learn how to fly in a sim while I wait
What about a prop wrench?
Wait no there's more 😶
@hallow oriole is a prop wrench
necessary?
@gaunt creek well youll need some sort of wrench. for a long time i used an adjustable cresent wrench but i believe they take an 8mm, i now have an 8mm nut driver as well as the ethix prop wrench
its not cheap but its awesome
https://www.amazon.com/Driver-Cushion-Klein-Tools-630-8MM/dp/B0009ORXSE/ref=sr_1_4?crid=73NMVSL5R7T4&dib=ey this also works
The full hollow shaft design facilitates work on stacked circuit boards or other long bolt or stud applications. Klein's exclusive Cushion-Grip handle offers greater torque and outstanding comfort. The patented Tip- Ident quickly identifies nut driver and size. For more than 160 years, Klein Tool...
Would you need both of these or just one?
A Fool still needs help with literally Everything
Just one
'nother item: An RID module. Technically you're supposed to have a RemoteID that tells the FAA where you are flying, how fast, etc. It goes on the drone, about $30 to $40. Technically you need it to comply with all drones heavier than 250 grams.
adds to the thread
Ehh
you “need” one
ya thats what i meant by "technically"
Just one
Yeah i got an RID module because it wouldnt let me register as over 250g without one and i wanted the piece of mind
But that was after 7 years of me flying completely illegally lol
I never had an issue, but its the chance you take
Don’t do anything stupid and they don’t care
Dont bother anyone and they don't even find out you exist
I'll get this the bolts and the rid module
How does one get a riz mod is it a process with the FAA?
Where can I buy some?
you can either get it in the form of a module (you can transfer it between drones) or you can get it as built into a gps module
The Ruko R111 is a compact, FAA-compliant remote ID module designed to enhance the safety and reliability of your drone flights. Weighing just 13.5g, it offers precise real-time GPS tracking within a range of 500-800 meters, even for lost drones that crash and power down. The module is compatible...
gps module: https://newbeedrone.com/collections/all/products/newbeedrone-beeid-m10q-gps-module-with-remoteid
All RID modules have a serial number that you register with the FAA
So I might aswell setup GPS is what you are saying?
the NewBeeDrone one is on preorder still, but if you're paying for a module, i'd want it to include GPS I can practically use
but this wasn't available when I got mine so I have the R111 above it
The r111 is basically just a rid module
yeah, nothing more
With GPS you can find it if lost and do return to home function?
I mean some people kinda need help understanding ngl
But this is some great patience bro..
What
Don’t be rude
I like helping people get into doing something I love
Don’t come into a thread with a new person and insult them
Hey hey
In not trying to be rude at all
I'm sorry if it was rude
I just asked, I felt it was as if u were spoon feeding him
Buy anyway sorry
I have been following this thread from the start
And again I'm not trying to be rude but I felt like they are missing out on the homework parr
Part*
@gaunt creek rid modules all are certified by the faa to complete the rid requirement, but they dont all work the same. Some of them require gps input from an outside source, some of them include a gps and allow betaflight to access it, and some of them are completely self contained units with a battery that do have gps but do not allow betaflight to access it. I prefer that last type, i got a real cheap ruko one that velcros on when i want to use it.
Thanks
I'll be more independent, thank you all for your patience.
I'm working two jobs 6 days a week, raising my brother, while doing school, while trying to sell my house, my time for homework is far and few between.I feared with my limited time i would end up needing to rebuy alot of things do to my lack of experience. I think you guys are very knowledgable and fun to talk with so I probably leaned on you guys a bit too much. I can certainly carry more of my own weight especially because you guys are all doing this with me on your own free time. Thank you all again for spending all this time with A fool who needs help with literally everything.
No what
I’ll help you don’t worry
i think they just came in to ridicule you
you wouldn't get answers if people don't want to give them
and you haven't asked to be spoonfed information so
While everyone’s here lol, did we miss anything? https://docs.google.com/spreadsheets/d/1stqDDwoMiFmqRTxziLsiQ7YnWge8gvOoavo88aX3eKY/edit?usp=sharing
Don’t get the omnifixo, get blue tac
Youre learning as we teach. Its only the people that refuse to learn that we will ever have a problem with. Dont worry about it.
It's chill busy at work will pester later
This is the help with drones section not the help with buying section. Beta flight, soldering, sims, radios, part 107, assembly, how to actually fly. I can drag this on forever. You can never leave. 
Oh you said while not why
Oops 😊
did i get it right
@soft pecan recommended the omnifix you better have a pretty good argument
and I use all 3 at a regular basis, sometimes at the same time
good eyes
good hand coordination
lol
i have to make up for it
yeah pretty much
i kind of burnt the like
plastic on my omnifixo
don't solder things that need to be real hot with plastic ends
lol
but but
wall of text says the omnifixo dont melt
yes. unless you're soldering at fucking 450c
and the whole thing you're soldering is nearing that temperature
lol
for quads i use the omnifixo more
frankly for just quads you can go without any at all
🙃 I just wanna not feck the quads
maybe even solder them well
the putty just keeps it still?
Oh
I kinda thought it was just a random helping hand tbh
wait i just removed it from the list 🤯
to buy or not to buy
For your frame
this stuff wont melt?
im not finding these extra arms
oh i was looking for a soldering thing called extra arms
omg it never ends
Electrical tape if you don’t have any good electrical tape
OH
422c from mg chemicals
bruh
why does he need conformal coating?
Is this your first pyrodrone order?
prolly i made an account
It’s waterproofing
cute
i thought its not good for your lungs and you have to be careful what you apply it to
The drone is super easy to short out if you acidently land in damp grass or your props cut some plants
Bruh
No shit
So is soldering?
I gotta try some then
Csn I send my referral link if I can find it
of course captain o7
o7?
Yeah I think they stole it from me
I tried to refer my family members for something and they got mad
cringe
Long story, I got a lil mad aswell and emailed them in a kinda rude way cause the way things worked out it looked like instead of taking 2D-points, they took like 1250
Still feel bad
this aint 20 dollas
amazon
422C-P is a Pen applicator containing an acrylic-silicone blend conformal coating that cures to a clear, durable, flexible and smooth finish for coating and protecting electronic traces. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers or sol...
this pen is 20
https://www.amazon.com/MG-Chemicals-Silicone-Conformal-Coating/dp/B085G42TGS i personally got this one
@soft pecan does this have long shipping times or is amazon even worse then I thought
how is it so cheap
that listing is $33 for me
i don't consider that cheap...
ohh the testequity site is cheap... yeah thats a lot more value for your $33
so i got it right the first time 😎
when you put conformal coating over a pad can you solder over it after?
i think so
yes
422c can be burnt off or removed with isopropyl
is there anything that you can't cover or do you just smother it over the whole board?
avoid the barometer, buttons and connectors
Do you know everything?
Unless I’m crazy you should be good to order
Yeah they do lmao
who do i harass to setup ideal veliosidrone settings with my boxer to be like what we are making?
The boxer shouldnt really need anything
As for the game settings
I'm not sure who has it
Maybe find a 5" veloci example online
This might be a google it question 😂

👍
Lol
On velocidrone, make sure the props are the right most option
Or at least starts with a “5”
The first two numbers are diameter, second two are pitch
5142 is 5.1inches, 4.2pitch
Roger
This is so out of pocket
I gotta fly again
You're a god
The church of Kirby is pleased
Tell me more about this church
this should be the new #🛸drone-general
Bet
I might be able to convince my parents to put the cost they were gonna do for a monitor(they wanted to see a live view and cobra x don’t have hdmi out) towards digital
They really wanted a monitor though
Digital what?
remember that the goggles x do have hdmi out and you can also wifi spectate if you have an android phone
That’s the selling point I was gonna use
Why is it so much cheaper to buy the goggles x and pro kit from caddx vs pyrodrone
wdym
Wait You Don't Have Digital and you have been carrying me this much?
Analog is fun
It’s just getting annoying enough to where I’d rather split off for some quads
I'll do analog next
579 vs 627
It’s great on whoops
Oh shit
It ends march 31st?
Ooo
If that monitor argument goes through I could get the goggles x by the end of the month
This is the right camera kit right?
https://docs.google.com/spreadsheets/d/1stqDDwoMiFmqRTxziLsiQ7YnWge8gvOoavo88aX3eKY/edit?usp=sharing
Good new I have a super affordable digital drone plan you can use
Suuuper affordable
with the N3 instead of the 3 its cheaper then goggles x + kit
So why not do that?
I dont love dji
I thought kits were cringe
its just the vtx, board, camera, and antennas
So it's just like how the 04 pro unit is a bunch of parts or how a stack is an ESC and flight controller
Yes
It’s literally the exact same type of thing as the 04
Hope it works out for you
At some point could any of yall look at the Spreadsheet? Everything highlighted in yellow is things that I'm not sure I got correct or from the right place
Also I'm curious what do y'all think of pilotsinstatute?
Pretty sure those lock nuts are too big
Strap is good
Blu tack is good
But it’s not adhesive like tape
GPS is good
To get your Part 107?
Yeah and in general
I think they have a test (really a form) to get your TRUST Certificate which you need to register with the FAA. Unless you’re looking to fly your drone commercially/make content for money, you shouldn’t need a 107.
Get the part 107 got it 👍
if you want to make money from flying quads
I like money
but you need to get your recreational license to fly for fun
yeah
I have my trust certificate
nice! then you need to go to https://faadronezone-access.faa.gov/#/ and pay the $5 to get your registration
Yeah but thats per drone if you have one no?
Does that mean swap it or is it alright?
Eventually
Gonna get the other licenses first
And HAM license really
Ham
It doesn’t really matter if you don’t bug anyone
Sounds tasty
So it does not necessarily have anything to do with drones?
I've never heard of this ham license
Ask in drone laws
Will do thanks
It sounds like the Ham license is not necessary why you going for it?
It’s technically neccisary
If you output over 25mw(that’s a good number, but not the exact one iirc) you need it
Wow I need to learn more about radios
Idk what outputing over 25mw means. Or why your would
I'm gonna research it
Ok so
Your vtx transmits video right?
The mw is the amount of power
25mw is gonna feel really low for you
Your radio can do 1W
Forgot what the 04 can go up to
Does power translate to latency, video quality?, or distance?
What does power give you?
one hopes
ahhhhh
If you yell less, it’s more muffled through walls and far away
So turning up the power is yelling louder
thank you for pulling out teeth for me now i get it
Lmfao
So yeah, latency, range, and penetration are what effects it
I run 800mw on my grinderino
which without Ham license is illegal.
im not seeing The W or mw the O4 pro unit can go to anywere
I googled it
where does it say the mw?
Set what?
output power
So we still don't know the output power of the o4. But if it is more than 25mw I'll want the HAM license
Its actually .45mw when you convert from dbm, idk how the 25mw thing started getting spread but its just completely wrong. That being said I don't have a ham lol
damn
why do you feel like a diffrent person
and we know the output power
It is more than 25mw, but 25mw isn't even the right number. Legally you need it but this is an fcc thing not an faa thing. Most people on here do not have a ham license
What is it?
Me?
beep
I'm still me as always I like humor so I'm giving this church thing a try
I suppose I'm less nervous to scare you guys away so I'm coming out of my shell more?
Different how?
idk how to explain it
nah
idk you were not this cautious about licenses before
i just put need in quotation marks and you were fine with it
I was always planning on the part 107 and I have the trust. Just like with everything I like to ask 1million questions to fully understand. If if annoying I can drop it or refer to the googles.
107? Or ham?
I want to do whatever is least likely to get me in trouble
so just dont annoy people
none of this will get you in trouble if you dont bother people
I am annoying people right now 🤣
if you get your ham, have your callsign(or whatevber the fuck they call it) something private
So part 107 is still A okay? And if I don't pester people I can forget the ham for now and just use the mw as high as I need.
I think we both have a misunderstanding
The HAM license is needed if you transmit under certain conditions, and the one you need it for is transmitting above a certain threshold
The thing is, that threshold is really low
Yes but I can just break that law if I don't bother people
Just use whatever mw you want, and get the license for the peace of mind if you need
Sounds good
I think the list is just about done
Just the waterproof stuffs and the big nuts
the safest thing is always just avoiding people in general. if you arent in a major city, the police are not roaming around looking for drones. they come when someone calls them and says WAH WAH WAH DRONE BOTHER ME WAH WAH WAH HES SPYING ON ME WAH WAH WAH you know? In my 8 years of flying ive never spoken to a cop about it.
And when you do talk to the cops they don’t really know the laws
I’d just get it from Amazon
That’s the link I got
Makes sense that other deal seemed to good to be true
So I can make my own
@stark flower
The heck is llama?
Hi llama don't forget to leave a pain reaction before you go
Also idk ¯_(ツ)_/¯ why you were beckoned
To the thread silly
Though I love the enthusiasm
i still cant believe they taught one of those how to fly a drone
Wait what
Lol
This thread took me an hour to read thru...
That's some pretty fast reading
Ty for creating this monstrosity of a thread
Ill make sure to leave a pain reaction on the way out
I just had a couple quick questions is all
Yeeeaah.... Im getting scared, what is a long question?
Would you like to join the church of The Meta to combat the Kirby takeover?
Ohh, in that case we are gonna be stuck here for a couple of days
Wait the build list is finished no?
Need to find proper spare nuts size so no
no they'll ask 30 more questions
claim it is finished
repeat
we are stuck here forever now
we can't ever leave
The 5k msg grind is reeeal
This seems like a targeted attack 👊
Since you're here I had a couple quick questions 😊
I sadly cant help with that as im incompetent at everything

To go pro or not to go pro?
What size nuts do I need
Is the Waterproofing stuff I found to good to be true
If I don't go pro is it to late to change frame shape?
Do you have this weird ham license?
What's your favorite color?
How the hell do I land?
I have cats how should I store and transport this stuffs?
The 30 question msg was just a joke....
Do Commercial Pilots ever make their own drones or is premade DJI like stuff the way to go?
Lmk when yall hit 4k msgs, i need smth to read in da train again
Go pro as in GoPro or 04
You need the o4 pro
anyone who needs something more special than how camera drones move generally end up with custom fpv drones commercially
especially if they need higher quality footage
Hovering is hard do you have any tips
The o4 lite is borderline unusable
Get good
Just hover over the ground and hit the disarm switch h
Lol I'm trying to ask 30 questions
Go pro
Will do
Do you think we can get to 5k messages?
I'm sure you could
What made you interested in drones and so knowledgeable?
videos of nitro planes
Fixed wings facinating
Is it true that quads can do everything fixed wings can but better?
Good morning friend ready to continue the endless grind
Was petting dogs
Emilia
Sounds nice
it's literally just silicone covering parts
So we found 422c from the Mg chemicals site, but it’s 12 ounces(compared to 55ml and way cheaper then on Amazon
Is there some catch or no
No the link I found
i don't know what you found
You won’t need to change anything with a gopro or without
Yeah I'm just wondering if I wanna potentially change the frame or not
the only reviews I can find are on eevblog and they're all bad, they've been around for a long time though
Go pro won't make it fly substantially worse?
So I suppose I should amazon it?
I mean you’ll feel it
Not substantially worse
See the price on that one makes more sense
12oz is so much
Of silicon coating
yeah i lost most of mine
You need like 10ml for each use
You lost it!?!
That seems like a pleasant thing to breathe
I mean it smells great
and like realistically the price on that testequity site can make sense
like they could be selling it normally
just can't find much info on the site
How long would that take to ship
I'll go with Emilia's link
Nuts
Size
Also when I was looking into the FOV of the O4 air pro deluxe gluten free unit it said fov 117.5
Can it go bigger or smaller than that?
4mm
No what
Fov
It’s 155
The DJI O4 Air Unit Series marks a new leap in video transmission performance, delivering a cutting-edge digital video transmission solution with higher resolution, lower latency, and extended range. Weighing just 8.2 grams, the DJI O4 Air Unit features a 1/2-inch image sensor capable of capturing 4K/60fps video, offering both portability and versatility. Taking it a step further, the DJI O4 Air Unit Pro boasts an enhanced imaging capability with a 1/1.3-inch image sensor, capable of recording 4K/120fps video. It also supports impressive features such as 10-bit D-Log M color mode and a *** 155° ultra-wide FOV***, [1] capturing the vast expanse of the world in unparalleled detail.
That first link has the same ratio and a decent price can I use this sexy link?
yes
Can fov be changed?
Also isn't 155 insane?
Your the best ❤️
Also I have a question
How is your day going?
ciske de rat
@soft pecan
Yeah?
You Dutch?
nee
Average
Not really
I see
I was using 118 in the sim
I'll have to see what 155 looks like
Try 155
I think the sim stops at 137
I use velocidrone
Just order the stuff already
1700 is a lot of moneys 🫠
Remember back in the day a long long time ago far far away the budget was 1000 🤷
No its very reasonable
No I know
We were gonna stay under 1250
I get paid on 11th of March and that is when I will order
Its okay
I have the crush 🫠
Oh yeah
So we prolly shouldn’t include that in this total
(I’m trying to gaslight you into thinking it’s cheaper)
Lol thats the spirit
Remember this all holds its value well, and if you break the drone the rest still works fine
Just treat it well, and it’ll last awhile
Green means it is already bought
Ah
I'm not finding 4mm nuts
i am
I don't think they exist on pyro
this sounds like a problem that can be solved
But but pyro
The 11th isn't to late right? Thats pretty soon
Can just refine it while waiting
can easily be
weekend everyone is buying
but i dont have moneys
will we have to change parts or just more waiting
that bad.. 😭
Do i need a landing pad 👀 ?
a case to protect it 👀?
A third job to pay for all this 👀 ?
no
depends
probably
Figured
Do not worry about the GoPro yet. You already linked the size nuts that you needed like 2 days ago. No, you don't need to waterproof it at all. To be honest, I guess you can change the frame but then you have to make sure everything fits again. No, you don't need a ham license. My favorite color is blue. You land by flipping the disarm switch 18 ft. Above the ground and cats I don't know
Written courtesy of speech to text so if there are any grammatical errors I'll blame that
i was told 5mm is wrong
also blue is a great color
the video quality of the o4 air unit is so good im considering swapping the frame
M5 is the correct nut size, i have a bag of them in my hand as we speak
Its an 8mm driver though
An m5 nut takes an 8mm wrench
thats nuts man
ntroducing the perfect field tool that you will carry with you everywhere.
Combining the three most common tools into one tiny and extremely handle little trifecta. Two 8mm prop nut sockets on opposing ends of silky smooth and robust redesigned one-way bearing system enable for quick and smooth prop changes. The silver side is for loosening and black side tightening. These 8mm hex sockets are Accompanied by the most common of all FPV drone bolt sizes 2.5mm and 2mm hex drivers. This tool is all you’ll ever need in a pinch and will outlast your aircraft many times over.
this is the discription of the wrench
and these are the nuts
90% sure the motors have a 4mm shaft
You guys should do rock paper scissors to see who is right
@hallow oriole
chiggy was right
Who's chiggy?
thats going in the collection
anyway who is chiggy
OHHH CHIGGY
when did he ever speak here
ok hold on hold on
how the fuck do i put gummies in
IT SAYS 4MM
yes this is correct
and this is correct because an m5 nut uses an 8mm socket
THATS THE SHAFT SIZE
INSIDE the motor
a 5" prop has a 5mm hole
those motors have a 5mm outside shaft for the prop
oh bruh
i just measured one with calipers to make sure
yeah. he definitely was
what did chiggy say?
i dunno
yay one gummie in
just buy these and ignore the naysayers 😂 i have bought m5 nuts several times and they fit on my 2207 t motor motors and my 7" motors as well.
hush
90% sure...
Are you 90% sure about this Kirby heaven aswell?
DJI RC3 + Goggles 3
1st flight DJI NEO Manual Mode Here
https://www.youtube.com/watch?v=p7ahliHCYso
Should have just got the neo

why not?
Not worth the downsides for you
It basically shifts the props back so they aren’t in view while flying
But also makes the drone more unstable
Nvm deadalus explained it
but if i wanna film scenery and i dont want a prop in it go pro is better thanswapping frame?
BUT WHAT IF I ALSO WANNA DO SICK TRICKS?!
you can
and go fast?
yges
and will it give me excuses to ask you lots of questions?
Ill go with the deadcat

lol
Maybe we should start from the beginning 🙂
since the frame holds it all together

🔫