#drone fell out of the sky
67 messages · Page 1 of 1 (latest)
I’m building a cinelog35 v2 from scratch because customs would stop it, upon first flight, it randomly fell out of the sky, anyone might be able to help?
Hard to tell when you give us literally 0 information
Sorry bro
A video would be more useful if it was dvr
I Don’t have any
I was just flying for the first time with this drone then suddenly it started to malfunction
Could it be because of wind?
Do you remember how it crashed? Did the motors stop spinning or did it rotate into the ground?
Should not affect it that much
No it started moving in the air like crazy then it stopped, then again, then it disarmed
It spazzed out in the sky
What should I check?
Did it turn off?
My friend had a problem with the xt60 on it
it just randomly turned off and spinned out
Were you flying it line of sight, or with goggles? An FPV drone is very hard to control in acro line of sight lol
do you have tele logs or something
whats the condition is broken what flight controller did you use
You've given us the equivalent of "My car randomly broke down, what happened?"
Without a lot more information, we can't help you.
What flight system did you use, Do you have a flight log? did you test fly it before this video? What point in the video did you lose control?
Are the props any lose
It happened to me a few times that the quad spun out because i didnt have the bolts properlyscrewd in
Especialy for new sets of props
There is thrust difference if its not secured properly
sorry for the late reply everyone, no I was flying with goggles
well because everything checked out, was flying fine until it spazzed out and fell out of the air, what do you want me to say everything was good until that happened
no lose props
Is it a new drone or old? BnF or Custom build? If BnF, what drone is it? If it's a custom, what are it's specs? What version of Betaflight is it running? Or is it running something else? Did you tune it yourself, or use a preset? What video system are you using? What radio are you using, and what control link protocol?
Shall I continue, or do you get the idea?
I think he got shocked
sorry, completely new drone, custom build but its the exact same as the geprc cinelog35 v2, but 4s motors, latest betaflight version, betaflight tunes, digital system with o3 air unit, radiomaster boxer paired with radiomaster rp1, ELRS
U run 4s batteries
yes
There we go... 👍
Fluke happi👍
From that info, I'd guess something not fastened down somewhere. Could be a loose motor, could be something flapping against the FC (wires, Rx, etc).
I did not touch any tunes but that is most likely not the issue right??
Anything loose will confuse the hell out of the Gyro/IMU and produce the behaviour described.
trust me everything is tight and stripped XD
Depends what the defaults are set to.
Can u send a pic pf ur fc?
ok give me one second
btw its my friends drone but Im refering to it as mine just to make communication easier
But do u jave it on u?
Great
idk whats wrong with his drone, it dosent seem to want to fly
it happens to all first builds
Hes doin something wong
Ill get back to you guys as soon as he sends a video
Np
Nevermind he fixed the issue
Nothing is working, not lights, nor sounds, what could be the issue?
I feel like it’s something extremely stupid
Could be broken