My Explorer lr 4 o3 wont lift off

[brazen valve]

Orrientation of the motors and then next to it is the flight test of the orrientation. i tried everything and nothing

Also my accelerometer orientation is correct when i tilt and roll, it does go on the right direction

[hardy axle]

it looks like your motor directions are correct, make sure youre using the Clockwise and counter clockwise props for the correct motors

[hardy axle]

but i think what you need to do is increase your startup power for the ESC

the flipping when starting looks kinda like the accelerometer or gyro arent calibratet right, open betaflight and check again if the tilt and roll are all correct

except for that, maybe the props or the startup power for the ESC

[fiery yarrow]

in the first clip literally all of your props are on wrong

[brazen valve]

i did check the accelerometer it is moving at the right orientation ,
i haven't mess with the props tho ill try that

[brazen valve]

yeah its a trial and error i was trying to rotate the motors around and switch the directions i did 4 trials and none of them worked

[brazen valve]

yes this is the original state of the motors but i had to mess around with it and see if it wants it to spin in a different way

on all the videos these are the rotations i tried

i know for a fact the first one on the left is the right rotation but like i said i had troubles having it fly so i rotated them and did some trial and error

[hardy axle]

well.. you need to just open betaflight or esc configurator and feel or see which way the motor spins without props on

then you reverse the direction or not

[brazen valve]

i have not mess with the props this started acting up when i flashed the new firmware, but when i was trying to load the back up CLI to the previous settings alot of red errors were coming up

it think i bricked it up 😦

[hardy axle]

depends on the errors

with new betaflight firmware some stuff got renamed or removed

[brazen valve]

when i tried clicking the reverse option my drone would not respond at all so i manually changed the rotation

[hardy axle]

in betaflight or esc-configurator?

[brazen valve]

thats a fair point yeah ill mess around with it more

betaflight

[hardy axle]

i wouldnt do that in betaflight

you have to reverse the motor direction in esc configurator

https://esc-configurator.com/

[brazen valve]

ow??? alright ill peep thank you very much

[hardy axle]

in betaflight keep the motor direction on normal how it was

if u need any help just ping me!

[fiery yarrow]

also extremly stupid idea to do all of this with props on

#❔help-quick-questions message