Help with the bind | Drone Community | Page 1

fathom seal Jul 10, 2024, 2:42 PM

#

Can anyone help me? I am new to this area

winged folio Jul 11, 2024, 12:28 AM

#

you need to have Crossfire Transmitter module, and LUA script on the radio, for it to work with crossfire

fathom seal Jul 11, 2024, 12:42 AM

#

Ok thx

proud yarrow Jul 11, 2024, 6:13 AM

#

what module have you got in the radio, and what receiver is in the drone (specifically, not just a general type)? @fathom seal

#

send pics if you don't know

winged folio Jul 11, 2024, 7:50 AM

#

proud yarrow what module have you got in the radio, and what receiver is in the drone (specif...

I don’t think he’s got a module on the radio

proud yarrow Jul 11, 2024, 7:50 AM

#

winged folio I don’t think he’s got a module on the radio

fathom seal Jul 11, 2024, 11:26 AM

#

Crossfire

#

and in the drone taranis

proud yarrow Jul 11, 2024, 11:38 AM

#

fathom seal and in the drone taranis

what

fathom seal Jul 11, 2024, 11:39 AM

#

receiving is a taranis

#

sry but im new

#

in this area

#

I was able to bind the drone with the remote control. But it turns out that the throttle etc. are 100% all the time. Even on betaflight it turns out accelerated

proud yarrow Jul 11, 2024, 12:03 PM

#

Taranis is a brand of radio transmitters from frsky

fathom seal Jul 11, 2024, 12:05 PM

#

R9 Mini-OTA

proud yarrow Jul 11, 2024, 12:07 PM

#

R9 Mini is an R9 receiver, not a Crossfire receiver.

fathom seal Jul 11, 2024, 12:08 PM

#

anyway he connected with the drone

proud yarrow Jul 11, 2024, 12:08 PM

#

That's not possible if it's an R9 receiver.

fathom seal Jul 11, 2024, 12:08 PM

#

fathom seal

but now i have this problem

fathom seal Jul 11, 2024, 12:09 PM

#

fathom seal Crossfire

I don't know what to tell you. I am new to this area. I bought the drone used and it also gave me this module

#

He told me that it's okay

proud yarrow Jul 11, 2024, 12:10 PM

#

fathom seal

Nothing in this video is relevant to binding or radio to receiver communication.

If your drone has an R9 receiver, but you have a Crossfire transmitter, then it can't work together.

I asked you for a photo of the receiver so I could verify what it is.

Also, just because you bought some stuff together doesn't mean that it can work together.

fathom seal Jul 11, 2024, 12:13 PM

#

Sure now I'll send you the picture. What I tell you that the connection with the drone is there is that the radio remote control gives random output

#

It is difficult to show

#

proud yarrow Jul 11, 2024, 12:17 PM

#

...

fathom seal Jul 11, 2024, 12:22 PM

#

help me solve the fact that the remote control gives 100% on each stick

silk root Jul 11, 2024, 12:27 PM

#

fathom seal help me solve the fact that the remote control gives 100% on each stick

Please show this happening

#

Is that in Betaflight Configurator? Or on your radio's channel output monitor?

fathom seal Jul 11, 2024, 12:27 PM

#

my radio channel output monitor

fathom seal Jul 11, 2024, 12:28 PM

#

fathom seal

Here you can see that all outputs are accelerated

silk root Jul 11, 2024, 12:28 PM

#

fathom seal Here you can see that all outputs are accelerated

They aren't accelerated, they're stuck at 100% output. There is no movement at all when you move the sticks.

fathom seal Jul 11, 2024, 12:29 PM

#

exactly

silk root Jul 11, 2024, 12:29 PM

#

If you can't communicate the issue accurately, we're gonna have a hard time

#

Go through the process of calibrating the sticks on your radio

fathom seal Jul 11, 2024, 12:30 PM

#

It is difficult for a neophyte to explain. Moving the sticks always results in 100% outputs

#

proud yarrow Jul 11, 2024, 12:40 PM

#

Your hardware settings are empty, the radio configuration most likely got corrupted.

fathom seal Jul 11, 2024, 12:44 PM

#

ya i think. Any idea to resolve?

#

I tried to reset it to factory settings but I can't 😭

silk root Jul 11, 2024, 12:46 PM

#

Might as well just reflash it at this point, I would think that would load at least some of the default stuff

proud yarrow Jul 11, 2024, 12:46 PM

#

@fathom seal what firmware is the radio running?

fathom seal Jul 11, 2024, 12:47 PM

#

proud yarrow Jul 11, 2024, 12:47 PM

#

Do you have a SD card in the radio?

fathom seal Jul 11, 2024, 12:47 PM

#

yep

proud yarrow Jul 11, 2024, 12:47 PM

#

Would you mind if the radio UI changed a bit?

#

opentx is a dead project.

#

It's been superceded by EdgeTX

#

but they tweaked the UI a couple versions ago so it will look a little bit different

fathom seal Jul 11, 2024, 12:49 PM

#

its not a problem, if the remote control works for me

proud yarrow Jul 11, 2024, 12:50 PM

#

Do you have anything you want to keep on the radio? Any models you want to back up?

fathom seal Jul 11, 2024, 12:50 PM

#

Nono

#

I make them again

proud yarrow Jul 11, 2024, 12:50 PM

#

Do you have a PC with Chrome on it?

fathom seal Jul 11, 2024, 12:51 PM

#

sure

proud yarrow Jul 11, 2024, 12:51 PM

#

https://buddy.edgetx.org/

fathom seal Jul 11, 2024, 12:51 PM

#

proud yarrow Jul 11, 2024, 12:51 PM

#

latest version, pick your radio

#

#

then

fathom seal Jul 11, 2024, 12:52 PM

#

Do I have to go into bootloader mode?

proud yarrow Jul 11, 2024, 12:52 PM

#

unplug USB from radio

#

turn radio OFF

#

plug in USB (without turning it on)

fathom seal Jul 11, 2024, 12:52 PM

#

ok

proud yarrow Jul 11, 2024, 12:52 PM

#

then, in edgetx buddy, press Flash via USB

#

and go through the process

#

if it asks you to pick a device, look for STM32 BOOTLOADER or TX16S or RadioMAster

fathom seal Jul 11, 2024, 12:53 PM

#

proud yarrow Jul 11, 2024, 12:53 PM

#

did you plug the USB into your PC?

fathom seal Jul 11, 2024, 12:53 PM

#

yes

proud yarrow Jul 11, 2024, 12:54 PM

#

the data usb, not the charging USB?

fathom seal Jul 11, 2024, 12:54 PM

#

#

Yes

proud yarrow Jul 11, 2024, 12:54 PM

#

Curious

fathom seal Jul 11, 2024, 12:55 PM

#

fathom seal Do I have to go into bootloader mode?

?

proud yarrow Jul 11, 2024, 12:55 PM

#

These radios go into USB Flashing mode if you plug them in while powered OFF

#

typically at least 😅

#

hasn't failed me yet...

#

are you using a C-C or C-A cable?

fathom seal Jul 11, 2024, 12:56 PM

#

C-A

proud yarrow Jul 11, 2024, 12:56 PM

#

not that problem either ._.

#

do yo u hear the device plugged in sound when you plug it in?

fathom seal Jul 11, 2024, 12:57 PM

#

Bro wtf

#

Now work

proud yarrow Jul 11, 2024, 12:57 PM

#

lol

fathom seal Jul 11, 2024, 12:57 PM

#

proud yarrow Jul 11, 2024, 12:57 PM

#

lol yeah your radio is very confused and the firmware is probably borked

#

Let's just ditch the many years old opentx xD

fathom seal Jul 11, 2024, 12:57 PM

#

confused like me;)

proud yarrow Jul 11, 2024, 12:57 PM

#

https://impulserc.blob.core.windows.net/utilities/ImpulseRC_Driver_Fixer.exe

#

You can try to run this on your PC to fix the STM32 drivers, but that's usually not needed for radios nowadays

fathom seal Jul 11, 2024, 12:59 PM

#

#

Is correct?

proud yarrow Jul 11, 2024, 12:59 PM

#

huh, it's doing something

#

just a quick check - your drone's USB was NOT connected, right?

fathom seal Jul 11, 2024, 12:59 PM

#

proud yarrow Jul 11, 2024, 1:00 PM

#

fathom seal

ignore that, just close and relaunch chrome

fathom seal Jul 11, 2024, 1:00 PM

#

proud yarrow just a quick check - your drone's USB was NOT connected, right?

Is not connected

proud yarrow Jul 11, 2024, 1:00 PM

#

fathom seal Is not connected

ok

#

relaunch chrome, go to edgetx buddy agian and retry

fathom seal Jul 11, 2024, 1:00 PM

#

#

Now there is

#

#

proud yarrow Jul 11, 2024, 1:05 PM

#

Progress? 🙂

fathom seal Jul 11, 2024, 1:05 PM

#

finished

proud yarrow Jul 11, 2024, 1:06 PM

#

ok, unplug USB and power it up

fathom seal Jul 11, 2024, 1:07 PM

#

Now it’s perfect

#

thank you guys, you are welcome to italy

proud yarrow Jul 11, 2024, 1:07 PM

#

😄

#

What about the receiver, that works?

#

If it works, then it can't be an R9 receiver btw xD

#Help with the bind