Phantom 4 Pro Help

[red vault]

Hello, I have an issue with my Phantom 4 Pro, basically whenever I press forwards (in GPS mode and everything calibrated) it ofcourse starts flying forwards, however it is basically going also a bit to the left side, the same thing happens when going backwards aswell, however not to the sides. (No errors in app or anywhere else, like I said I re-calibrated everything and it just keeps happening, the only time it hasnt happened was when either going extremely slow and low to the ground or when in ATTI mode.) I also re-freshed the firmware on the drone and the issue still persists. Help/Advice would be greatly appreciated

[red vault]

Please ping me if you decide to say something here...

[wheat phoenix]

You calibrated IMU properly?

You calibrated controller gimbals ?

@red vault

[red vault]

yup

[red vault]

yup

the gimbal does a bit weird sound though

however works perfectly fine

[wheat phoenix]

Can you record vid ?

[red vault]

sure give me a sec

[red vault]

gotta take out my drone it will take me a min

[wheat phoenix]

Okey

[red vault]

@wheat phoenix does this, however will finish calibrating just fine

latest firmware update aswell and no errors in app during or before flight

[wheat phoenix]

Try to unscrew drone and check if something is not loose

Or unscrewed

[red vault]

where exactly?

[wheat phoenix]

Bottom

[red vault]

I just took apart the other Phantom 4 I have recently, so I know how to take it apart, however tell me like which exact part u want me to look at

[wheat phoenix]

And chceck if there’s short circuit

[red vault]

so u want me to basically take off even the top part?

so that I can unplug the gimbal? together with the antenna?

[wheat phoenix]

This part

[red vault]

the zinc part?

[wheat phoenix]

Yeah

[red vault]

only that?

let me see if I have the tools for that in this house

give me a min

[wheat phoenix]

To chceck inside

[wheat phoenix]

Check Fan , ESC , FC

And wires

[red vault]

I dont have the tools for that in this house, what would be the other step if thats fine?

[wheat phoenix]

You need to chceck inside

You need screwdriver

[red vault]

its a hexagon one, I dont have it in this house, but in my other one where the other P4 I have is

thats why I asked what would be the other step if inside is fine

[wheat phoenix]

Maybe borrow from a neighbor

[red vault]

• fan is fine, since the sound from the gimbal comes ONLY when calibrating, when I move it or "push" it into some other direction (when turned on ofcourse) it doesent happen

and idk I will check it, just saying would be odd to me if something was wrong inside

[wheat phoenix]

Because you can't check anything from the outside

[red vault]

yeah yeah I know

[wheat phoenix]

Okey

[red vault]

yeah I cannot check the inside right now, however I can proly today/tommorow, but tell me if everything is alright inside, what is the next step...?

@wheat phoenix , What would you say to look for more exactly, since the drone howers just fine and also flies basically flawlessly, other than those 2 directions...?

[wheat phoenix]

Gyro can be damaged

Or it’s unscrewed

[red vault]

I will check that, today imma go to my other house and open it, since I need the drone working ngl

also @wheat phoenix any suggestions for the DJI assistant not working for me in order to calibrate the vision sensors?

I tried re-installing however it does not work

everything else in the app works but the calibration

also had the issue on my other phantom, so I doubt its a drone issue

says this

but then trying 2nd time

works

and shows this, but not the calibration shit itself

[red vault]

nvm fixed this

[red vault]

@wheat phoenix

[red vault]

@wheat phoenix ?

[copper bear]

i think he gone

[wheat phoenix]

Everything looks okey to me