daring swift
I'm trying to update the module to elrs v3, and it just refuses to connect?
** Searching flight controllers **
** No FC found, find all ports **
Detected the following serial ports on this system:
COM4
esptool.py v4.2.1
Serial port COM4
Connecting...
.
.
.
.
.
.
.
.
Also i only have a flash button which is different from what ELRS docs say but idk i still only should need to press flash, right?
dull night
Show a picture of the module
daring swift
dull night
Unplug USB, open up the module, hold down the button labeled 32GO at the bottom left, plug in USB, flash again
daring swift
i removed 2 screws but it's not coming apart easily
oh there's two under the sticker
daring swift
Unplug USB, open up the module, hold down the button labeled 32GO at the bottom ...
i don't see that
dull night
Show a photo
daring swift
dull night
hold down the button on the front while plugging in USB
daring swift
can i let it go after
also not sure if the screen is supposed to light up after pluggin it in
sometimes it doesn't 💀
daring swift
nothing changed
idk let me try a laptop instead
wtf i think it's working on my macbook
not a satisfying solution but probably something to do with my windows
dull night
Where did you download the driver from?
dull night
Flashed successfully on the other computer?
daring swift
yes
ok interesting
in betaflight, i click bind receiver
and then i press bind on the radio (zorro) and the drone preview flips around
and then it doesn't connect anymore
also should it say status 333hz 0err in MDL > Setup
it says 333hz on the module screen as well
baudrate 400k
oh it's working
i set it to 250hz in ELRS script
dull night
That's not how you bind
What radio do you have?
Baud rate should probably be 1.87M
Unless it's an old FrSky radio
daring swift
Everything working?
i'll have to try later, but it seems for now, yes
thanks for the help
