Hey guys, I decided to add xt30 to my mobula 7 to use with 2S batteries. What is the thinnest AWG wire I can use? Motors are GTS v3 14000kv. I think the connector i bought came with 16AWG wire which is hard to solder on to the board. Any help appriciated.
#mobula 7 XT30 thinnest wire
wind thunder
robust hollow
I would not use a 2s LiPo on a board/done designed for 1s. You could damage the board and the drone would not fly properly on that kv motors. So if you don’t want to damage anything and you want to fly 2s I would recommend something like the Mob 8 or Bassline so you don’t need new motors or a aio.
keen barn
I would not use a 2s LiPo on a board/done designed for 1s. You could damage the ...
mobula 7 has a 2s version