#Diatone mamba f405 mk2 after betaflight update to 4.4.2 not arming.

17 messages · Page 1 of 1 (latest)

covert spade
#

The esc does only 3 out of 5 init beeps(not detecting throttle)
I have swapped the connector cable from fc to esc. I have selected dshot 600.
i cant connect the esc to blheli 32 via usb

#

when arming the esc does the 3 first beeps again

rocky meteor
#

you flashed it with the right firmware for your board?

covert spade
#

i flashed betaflights suggestion (mambaf405us)

#

so i guess but im not 100% sure

rocky meteor
#

betaflight has autodetect function for flashing did u use that?

covert spade
#

yes

#

thats what i meant

rocky meteor
#

can you flash it again? see if it works

covert spade
#

already tried that several times

rocky meteor
#

jhoshoa bardwell just made a video about flashing your fc maybe try watch that

covert spade
rocky meteor
#

https://www.youtube.com/watch?v=LkBWRiEGKTI i think i watched this one but maybe that one also has ome info

YouTube
Joshua Bardwell
Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

Watch all the videos in this series at: https://www....

▶ Play video
covert spade
#

ok i will watch that

covert spade
#

it had to be FURYF4OSD but it detected mambaf405us

#

thank you for your help @rocky meteor