I need help with the Uart assignment
#Uart help
high tendon
I have a Caddx-Vista-Nebula-Pro
Diatone-MAMBA-F740-AIO-40A-6S-32bit-WIFI
@past raptor the Caddx-Vista-Nebula-Pro is on Uart 2 but is it a receiver or Konfuration
@solid latch can you help me pls
solid latch
How did you wire it up?
solid latch
So you have the SBUS signal from the air unit going to an RX1 pad, and the MSP interface to RX2/TX2
high tendon
i hope its not a probelm bc i used the sbus cable for my receiver
high tendon
So you have the SBUS signal from the air unit going to an RX1 pad, and the MSP i...
but yes i have
solid latch
i hope its not a probelm bc i used the sbus cable for my receiver
Do you want to use a separate radio system, or the DJI radio?
high tendon
Do you want to use a separate radio system, or the DJI radio?
Separate Radio
solid latch
Separate Radio
Then remove the sbus wire
high tendon
i allready used it for my receiver (for the separat radio)
high tendon
Then remove the sbus wire
i didnt connected it to the Caddx-Vista-Nebula
solid latch
i allready used it for my receiver (for the separat radio)
What receiver?
high tendon
ik its old but its a jeti rex3
now i get a Betaflight error "Chrome API Error: Failed to connect to the port"
high tendon
do oyu know were the problem is?
solid latch
now i get a Betaflight error "Chrome API Error: Failed to connect to the port"
screenshot of the configurator please
high tendon
i cant connect it the drone
its in german sorry
"Acces to Serial port denied/Failled"
solid latch
"Acces to Serial port denied/Failled"
well it would certainly help if you had a serial port selected in the first place
high tendon
witch one should i select?
solid latch
witch one should i select?
the one that appears when you plug the quad in
high tendon
Pluged it in and no connect sound and no port
solid latch
are you using a USB cable that can carry data?
high tendon
yes
like 15 minutes ago i connected it and it worked but after i unpluged it was broken#
and i gut the error
@solid latch do i have to connect the battery?
solid latch
<@367656454087245825> do i have to connect the battery?
no
solid latch
like 15 minutes ago i connected it and it worked but after i unpluged it was bro...
did you change anything?
high tendon
did you change anything?
i clicked some uarts but i dident safe anything
just unpluged it
solid latch
i clicked some uarts but i dident safe anything
that's the only thing you did?
high tendon
that's the only thing you did?
Yes
solid latch
what did you change?
high tendon
i think i turned on Serial Receiver on Uart2
only thing i can remeber
but as i said dident hit save and reboot
is there any way to flash the firmware?
high tendon
can you just try a different USB cable?
already tryed
same error
i will reinstall bateflight
nope still not working
i get another Stack on saturday i will try if that works
if yes i will send the other stack back to the reseller
i think that solves the problem
solid latch
i get another Stack on saturday i will try if that works
I don't think it's outright broken
high tendon
what could be the problem?
solid latch
can you get a pic of the FC lights when it's plugged in?
high tendon
Then this one
high tendon
Update i will send it back to the reseller
solid latch
Then this one
Sorry I was tired and didn't notice yesterday. Let me see
high tendon
Sorry I was tired and didn't notice yesterday. Let me see
idk okay
the mamba support Couldn't help me
solid latch
@high tendon
These should be the indicator lights under the second smaller board that's on top
high tendon
these light are on the Lower board and not even one is lighting up
i also got my thermal gun and i got up to 150,8 °F or 66 °C
high tendon
i want to buy a transmitter that works with the caddx vist air unit. I looked at the offical dji transmitter but they are out of stock everywhere are there any other Companys that make transmitter that work with the Caddx vista air unit? @solid latch
solid latch
these light are on the Lower board and not even one is lighting up
Not even with the battery in?
high tendon
Not even with the battery in?
no
solid latch
That's really weird
The soldering looks fine, I don't really think that would cause it either
solid latch
No other radio would work apart from the DJI stuff
I would STRONGLY recommend not using that radio system anyway
solid latch
okay how about FrSky
I wouldn't recommend FrSky either
Really nowadays I would only consider ELRS as an option going forward
high tendon
i think its illigal in germany
solid latch
i think its illigal in germany
no one will care (maybe except you)
high tendon
My dad will care
And when something happens my insurance will look at the drone and if something is illegal when won’t pay
solid latch
If you fly FPV without a spotter that also doesn't have a license you are already flying illegally anyway
You can either have a crappy experience by sticking to all the laws and have the fun taken out of the hobby... or you can take it less seriously and just get proper equipment
high tendon
i am building sub250 so i don´t need a spotter and i am already qualified for the licence but you´r right
Maybe I can persuade my father that I can buy it
i have a idea
when i crash i just swallow the Receiver
solid latch
I know I was just poking fun at their rather large receivers
high tendon
the thing is i cant find anything on what protocal is legal or not
solid latch
the thing is i cant find anything on what protocal is legal or not
I think if it was really that illegal, it wouldn't even be sold in germany
yet it is
high tendon
i think elrs is legal BUT what transmitter should i use
Multi-Protocol is ILLIGAL
so no radiomaster
solid latch
are ELRS LBT and ELRS the same?
yes, it's a changeable option in the configurator
solid latch
what elrs receiver would you recommend?
Anything from Foxeer, Happymodel, Namimno, Skystars, or Radiomaster
Also the BetaFPV SuperD, their other receivers are okay
high tendon
okay thx