I just got a new mamba mk4 F722 stack and when I pluged the usb-c to USB on my computer nothing happened on betaflight. I tried Zadig and it did not appear on their either. I also tried ImpulseRC Driver Fixer and it wasn't able to fix the driver because it could not connect to them. And of course tried 3 different cables to make sure it wasn't that either. Anybody have any guesses to what I am doing wrong?
#Brand new flight controller won't work
open zenith
latent tulip
I just got a new mamba mk4 F722 stack and when I pluged the usb-c to USB on my c...
this will sound stupid, but
- use a USB-A to USB-C cable
- try to flip the USB-C connector over
open zenith
Nothing unfortunately. It was worth a shot I'm down to try anything at this point.
royal oxide
Does the COM port show up at least?
open zenith
No that's why it is so weird. I am fairly new to FPV but know that there is a boot mode is there any way I could use that?
royal oxide
Potentially, if the FC is even getting power
Do the LEDs on the board turn on when you plug it in?
modern pebble
Could be completely dead. Try different cables, use the same one you charge your phone with and plug it straight into the computer. If there's no signs of life I'd just get a replacement. It should for up immediately.
royal oxide
You've tried different cables... But have you tried different ports?