airsoft

[honest meadow]

different to all the multicam stuff you see mainly

[untold crater]

give up bear..

[honest meadow]

i used to do bear stuff but i've switched to trying to do impression kits now

but i as usual have like 4 on the go at the same time so none of them are fully complete

mainly just waiting on getting the right uniforms

[untold crater]

I only have 1 kit

[honest meadow]

my 76th vdv is the closest cause they did sometimes wear emr gorka's rarely tho i think there is maybe like 1 ref

[honest meadow]

thing is i have all these kits but i only do kits that i can reuse my guns

i only have 3

two ak's and a mp7 thats refusing to feed properly rn

[untold crater]

I only use my closet for airsoft now, haven't used it for anything else for as long as I can remember

[honest meadow]

alot of coathangers haha

[untold crater]

I had to borrow some

the ones I had were tiny

[untold crater]

that is WAY outside of my budget

I dont even have a sling

[honest meadow]

if u have a camera strap it can work one sec i'll show u my setup

[untold crater]

I only have a national guard neck badge thing

[honest meadow]

literally a cannon camera strap

[untold crater]

not long enough

[honest meadow]

would work as a single point on ur ak

[honest meadow]

yea i wouldnt trust a lanyard haha

but yea tbh for now just save like a mf

[rapid wolf]

coulda not bought a pistol and just gone with stuff for your plate carrier

just rifle is fine tbh

[honest meadow]

yea fr ngl the pistol is kinda un needed especially if ur tight for cash

i still dont have a pistol at all

just cause ik that i prolly wont use it

[sacred wedge]

u look like a afghan army dude

[proven pike]

so i got an lct gearbox in an e and l body, do i need the m4 nozzle or the ak nozzle for my wolverine gne to inferno

[honest meadow]

ak nozzle

[honest meadow]

really? i was going for more of BF3 engineer

[proven pike]

cheers, now ik how to fix it

[honest meadow]

i mean it is a E&L ak reciever right and not one of their m4's?

[proven pike]

yh

[honest meadow]

alr yea get the ak nozzle

[proven pike]

just on wolverines website it says m4 nozzle for lct

[honest meadow]

tbh if ur not sure how much are the nozzles?

cause i'd say get both then u can have one spare

[proven pike]

only 20 ish quid

[honest meadow]

means u could swap it into diff rifs too

[proven pike]

alreadt tried with m4 nozzle

[honest meadow]

ah well yea get the ak then

should work

[honest meadow]

if the m4 one didnt like u said

[umbral pilot]

Does anyone know if the wobbly magazines on specna arms AKs actually cause issues?

[old latch]

I can't speak to Specna AKs specifically but so long as it doesn't fall out it should be no problem.
You can also put some Velcro tape or the likes inside the mag well and they won't wobble anymore

[umbral pilot]

Oh okidok

Thank you

[honest meadow]

all ak's have wobbly magazines if using certain brands

the only mags ik not to wobble in my E&L are my E&L magazines

any other brands and they wobble but it has no effect

[umbral pilot]

I see

Why is it like that even? Something to do with technical specifics of how the replica is done?

[honest meadow]

diff companys mags have slightly different tolerences

[slate jay]

Made a copy of the dutch service rifle

The colt c7

[crystal rover]

I got new gun

Can’t send photo atm but when I get home

[crystal rover]

Cyma sr47 10”. Mag, muzzles and light were mine long before acquisition

[copper beacon]

Unga dunga

[hollow heart]

damn https://youtu.be/bbKf8pgHYxI?si=UoOZr-MTn5hvbH5p

[slate jay]

Just a regulier m16 nothing to over the top

[crystal rover]

Finally going to play again now that h have a working gun

[honest meadow]

pls get 7.62 mags

[crystal rover]

Nah

They are gonna be the mags I use for the 103 I am getting

[harsh spire]

The 103 is also a 7.62 gun

It’s just a AK-74m without the right mags

[umbral pilot]

This is so disgusting and I love it

[crystal rover]

Meant the 105

[smoky thunder]

5.45 AR is so cursed I love it

[crystal rover]

But honestly this may be like the back back gun now

so mag smag

Ar74 cooler

[grizzled whale]

mhm

[honest meadow]

m16 with modified akm magazines like in nam are cooler

[river bison]

@honest meadow

[proven ermine]

New mag when?

[river bison]

Lol the Islamic insurgents in the Philippines uses bannana mags for the M16

[honest meadow]

even better

[untold crater]

@honest meadow found the dust cover after all this time

there are 2 openings where it connects to the pin

one of them has been completely sheared off

i guess somebody broke it and tried to hide it

[honest meadow]

R.i.p just gonna have to run it scav style for now ig

[untold crater]

lol

i was actually thinking of having just a scav setup

that fuckin ak

civillian clothes and makeshift gear

[harsh spire]

I got a vfc scar H AEG

Any upgrade suggestions

[honest meadow]

Hope and pray the gearbox doesnt explode

Tbh i wouldnt change anything just change parts out if and when rhey break

[harsh spire]

Ive heard the only issue is the ring terminal

But ya if it booms I’ll throw in a cyma plat gearbox

[harsh spire]

And the ring terminal is kind of fixable you just drill a hole and wire it normally

Also only paid $250 compared to the $400 listing price on evike

I’ve got room in my budget for upgrades but not a lot I still want a elcan

[crystal rover]

maxx hopup

[harsh spire]

Also gonna buy the double bell vfc spec scar mags they are not good and only hold 80 rounds but they are also only $10 instead of fucking 30 so I can buy a bunch of em and if one or two goes bad later on down the line big whoop I’ll just buy another lol

[crystal rover]

they also way like 50grams

uh

mrek mlok rail

socom tacer

mosfet

gears, motor

bucking is a must

make it deans

thats what i would do

asl oa piston with metal teet

[harsh spire]

How much is that all gonna cost just an estimate

Also I’m not getting any external mods

I want to make a clone of knights scar H as he is my favorite boss from this game

[crystal rover]

ah i see

well where are you buying from?

[harsh spire]

Evike most likely

As I need several more pieces of gear from them before I go to milsim west this April

I will also be making a order from taiwangun as that is the only way to get the double bell scar mags

[crystal rover]

my friend will be there cna you bully him for me

also is it a v2.5 gb

[harsh spire]

No it’s a V2

Only difference is the nozzle

At least i think that’s the only difference it’s definitely a V2 tho with full v2 compatibility

[crystal rover]

hmmm

[harsh spire]

Trying to replicate this specific version of knights scar H

[crystal rover]

i see

what your kit gonna look like

[harsh spire]

Nothin like his

But it’s a JPC 2.0 in ranger green

With a mismatch color of pouches

[crystal rover]

any aor-2

[harsh spire]

Yes

Well not for the event

They won’t let me

At least I don’t think so

They may not care for pouches

Wich would be dope cause the AOR-2 pouches are pretty high quality

[crystal rover]

ok. there is one thing i would get that doesnt come from evike or twg, but smth to know first. are you building the gb or a tech

[harsh spire]

No just a rifleman

[crystal rover]

reread

[harsh spire]

Oh

A tech will be doing the upgrades

I’m no where near experienced enough

I can build out externals pretty good just not internals

Every time I try I break the gun

Well not break I just can’t put it back together

[crystal rover]

https://t238.net/products/etu-v2-0-for-v2-gearbox

[harsh spire]

If I’m gonna get a mosfet I’ll probably get a perun

[crystal rover]

these are better

[harsh spire]

No one has anything bad to say about them so far

[crystal rover]

t238 is comparable to gate, but cheaper

[harsh spire]

When it comes to high end mosfets I’ve found they are really high maintenance

[crystal rover]

it aint

[harsh spire]

The term good when it works gets thrown around a lot

In reference to the jefftron and gate stuff

[crystal rover]

https://t238.net/products/dtu-v1-7-for-v2-gearbox also this

gate performance, perun prices

[harsh spire]

Gate problems tho?

Like deciding it doesn’t want to work mid gunfight

[crystal rover]

no not gat problems

https://www.youtube.com/watch?v=DPUnL1qSSkU&pp=ygUEdDIzOA%3D%3D

the wire i believe that have fixed

@harsh spire how long is the nozzle on your gearbox

[harsh spire]

I don’t know I literally just bought the gun 4 hours ago

I would preferably like to have some upgrades more focused on the range though considering the distance of engagements at Milsim West

[crystal rover]

so hopup, bucking, and barrel

what weight bb you plan on using

[harsh spire]

.25

[crystal rover]

do you know which variant it is

cqb, carbine, or dmr

[harsh spire]

Cqb

[crystal rover]

looking at barrels, you got 2 options.
have a barrel thats to short
or
hav a barrel thats to long and get a tracer or a small supressor

[harsh spire]

I’m gonna be using the scar H style flash hider so I think I have maybe two or so extra inches of hidden barrel length

[crystal rover]

ok then

[noble wasp]

Does anyone know if this is an okay rifle?

Golden eagle mk16 m-lok

4790 nok is 450 usd

[crystal rover]

so pricy

but good gun'

[noble wasp]

Yeah its because its an local website so i dont need to pay extra for shipping, tax and customs so if i would purchase from other websites it would probably be more expensive

[crystal rover]

you would be suprised

but is it gas or aeg

[noble wasp]

Gas

Gbbr

[crystal rover]

first gun?

[noble wasp]

I have had a glock 19 gbb but it broke

so first rifle

[crystal rover]

i wouldnt get a gbbr

[noble wasp]

Because of the extra expenses?

[crystal rover]

yes, and just not worth

[noble wasp]

I thought about aeg but is it possible to get an aeg with some of the same realism?

[crystal rover]

trust me

getting a gbbr to start with cause realism aint worth it

cause unlike aegs and real guns

they break

alot

[noble wasp]

Yeah i can see that, my glock broke the firing pin just because i dry fired it

Ill take a look at some aeg rifles

[harsh spire]

ITS A FUCKING WE TECH AEG SCAR WTF

why do they make that

i need to get that hop up order canceled

[crystal rover]

HUH

@harsh spire we tech doesnt make a aey sar h

[noble wasp]

Phillbo762 i found this

[crystal rover]

good gun

[noble wasp]

Yeah i see alot of good reviews and youtube vids about it

[rapid wolf]

dont get golden eagle gbbrs lmao

pot metal

[noble wasp]

Alright ill buy an aeg instead

Does the Specna Arms - E06-H EDGE have alot of metal?

Not that its important for me but nice to know

[harsh spire]

Yes they do

Check evike

We tech scar H aeg

From the little I can find about it it’s not exactly a bad gun but mags are nearly impossible to get

The guy who sold it to me, didn’t show any of the logos or labels and the manual for the gun was obscured underneath the actual gun

[harsh spire]

The guy cancled the sale thank goodness

[river bison]

Lol what did you get this time

[harsh spire]

a fucking we tech scar H AEG

i didnt even know those existed

but the sale got cancled so we good

[river bison]

aeg?

[harsh spire]

yes

[crystal rover]

Only one I see is a scar-l aeg

[harsh spire]

https://www.evike.com/products/70415/

[crystal rover]

Weird

Wasn’t showing up for me

[harsh spire]

Anyways I found a guy selling a VFC SCAR H and as soon as I see the mags and confirm it’s a vfc im gonna scoop it up

[crystal rover]

Cool

[inland needle]

i use a slingshot for airsoft (real shit)

[river bison]

My SCAR H was so problematic

[tight grove]

Some photos from airsoft this weekend

[harsh spire]

What happened to it

[river bison]

It’s fine now but I was having so much feeding issues with it after I installed the maxx hopup

Turns out I had to set the dwell to a specific amount on my HPA engine

I had to put a heavy spring on it

And it’s basically an honest to god DMR considering it needs 120 psi

[harsh spire]

Oh so it wasn’t an issue with the gearbox

I forgot you don’t do AEG that often

[noble wasp]

are daniel-defense airsoft rifles good?

[harsh spire]

Depends who made it

[honest meadow]

ever anymore

he is a hpa fiend

[river bison]

Decent

Externals are great but the internals vary

I heard good things about the DD Cyma plat series

[proven pike]

hoser

[harsh spire]

Scuba Steve

[crystal rover]

no he just inst poor. unlike you

[night kettle]

actually licensed ones yeah, anything that looks like a ddmk but isn’t licensed is probably shit

[harsh spire]

Generally I would agree but the E&L MK18 is a fine machine

Aside from the screws rusting

[river bison]

Wtf is up with E&L’s and rusting lol

[river bison]

Yes I hose

[proven pike]

ikr

[river bison]

I’m happy to say this Cyma 105 is holding up

My only issue right now is finding a replacement charging handle rod/spring assembly

So it’s more compatible with dust cover

[honest meadow]

cause the steel isnt powder coated and people dont understand that they cant just leave it out after using it in humid environments or just leaving it out for ages otherwise it will rust as it is steel

[river bison]

I had this issue with my dust covers

[honest meadow]

ppl say lct is better externally because they dont rust but thats only cause they are powdercoated in black

[river bison]

I need to get a TA11

ACOG

To put on this M27

Or the M240

[harsh spire]

I don’t know people will defend E&L and for good reason but the rusting is bullshit

Give the guns better finishes like LCT and then I’ll buy them

[river bison]

I like them but rusting is one of those things I always have to worry about

I had an LCT but that shit was just heavy as fuck

Also the price

For what it is

[harsh spire]

I live in a place where it gets wet all year round so I can’t be dealing with the rusting shit

LCTs are amazing externally it leave a lot to be desired internally

But for externals they are literally the best you can get

Not just cause of the powder coating

[river bison]

I’m getting the 240 tomorrow

Finally

Goddamn takes 7 days from Cali

[night kettle]

i’ve only had two guns and one was a dd and my current one is a g&g cm

[river bison]

I’m worried about wiring my FCU to the drum mag because there’s literally no instructions

[harsh spire]

Based af hope it works out for you

[honest meadow]

i mean i think the powder coated black looks like ass in comparison to the blueing on E&L

[harsh spire]

Black powder coat doesn’t rust tho

[honest meadow]

i also prefer the fact that E&L can easily accept real spec handguards without the need to mangle them

[harsh spire]

I leave my AKs stock so it doesn’t both me with lct

But also lct has a ton of variety

[honest meadow]

also the fact that lct are the oem of the recievers for ghk speaks for itself

[honest meadow]

yea ig but the prices are a bit over the top

[harsh spire]

Lots of weird niche stuff no one else makes

[honest meadow]

and you could build a E&l to look the same for cheaper

[harsh spire]

$375 for a full steal 1:1 zastava M70 isn’t bad

[harsh spire]

E&L doesn’t make zastava or hk33s or hk G3s with lct there’s lots of variety not just with AKs

[honest meadow]

also from what i have seen personally lct's are a gamble when it comes to whether or not the hop up will be fucked from factory

[harsh spire]

I mean mine is fine My buddies is fine and everyone I’ve met has t had an issue either

[honest meadow]

yea E&L's goal is to make cool ak varients that look good and perform nicely

[harsh spire]

Well then Arcturus beat them

[honest meadow]

arcturus is for the more wacky stuff

[honest meadow]

they are under the same umbrella company

[harsh spire]

Arcturus AKs are the best performing AKs out of the box

[honest meadow]

arcturus is pure performance

still good externals

but nothing on E&L

[harsh spire]

Still no rust tho

I won’t buy E&L till they fix that

[honest meadow]

i mean idk i havent had any problem with rusting at all

[harsh spire]

They can fix it it seems the choose not to

[honest meadow]

just wipe my 105 down when i get home and leave the case cracked open for a couple days and its fine

idk it is no where near as big of a problem as people make it out as

people who complain are the ppl who dont do any basic preventative maintenance to their guns after a game day

[harsh spire]

Yeah I don’t do that and I don’t think I really should have to I’ve never done that with any of my guns and so far non of my guns have broke on me at least where it wasn’t the fault of bad tech work

[honest meadow]

yea but i mean like atleast just cleaning off the inner barrel

but it genuinely takes like 2 minutes max its not an inconvinience at all

[crystal dew]

Buy it

[stuck helm]

Are evolution gear replica holos better or worse than holly warrior

[harsh spire]

Better

Holy warrior has the ghost effect meaning you can see two reticles

[crystal rover]

First photo is fake, Airsofters don’t have girlfriends

[river bison]

You are either married or you are not

[crystal rover]

Yep

[stuck helm]

Do you know if the EG uh-1 replica is any good?

[harsh spire]

I don’t sorry

[crystal dew]

Womp womp

[crystal rover]

Fake

[jovial gorge]

kinda more of a S.T.A.L.K.E.R type kit but some people say i look kinda like Sherman

i need to buy i end stock for the gun but they are pircey and the rifle stocks are hard to source

[frozen raven]

e&L are lovely but they do suffer from rust but I’m not paying $400 for a painted container to hold a gearbox that is going to shred itself anyway they are just not worth the price point it’s better to get CYMA and upgrade your parts it will cost less and wear the same

[harsh spire]

I could throw my lct hk33 through a car Windshield and it would be fine externally lct can’t be beat

[frozen raven]

Btw I saw a second LCT AK shred itself

[harsh spire]

I’m not saying the internals are good cause they ain’t

But external wise again they can’t be beat

[frozen raven]

Personally im not going to pay almost half a grand for something that looks pretty but that I’ve seen tear itself apart the 2 times I’ve seen them

[harsh spire]

I will

Cause externals are what I care about I can always upgrade internally

Can’t fix shitty externals

[frozen raven]

All I’ve seen of them is that they share all the qualities of a Chinese bootleg Prada bag look pretty fall apart quickly

[harsh spire]

I have not seen that and most LCTs I’ve come across have been fine

Mine has been fine and it’s bone stock

Lemons exist with any brand I’ve seen a G&G combat machine catch on fire but that doesn’t mean those guns are bad.

[frozen raven]

I get that but like I can’t not take into account that 2/2 that my friends have gotten in the last year had this issue

[harsh spire]

Sure if you want to not buy lct that’s fine I’m not a salesman what I’m saying is that I have owned a few LCTs and my friends have owned several my buddys vdv re-enactment group runs lct exclusively and none of them have had issues

Not a single lct I’ve seen that has been at least mildly taken care of as in not abused has been fine

But no can ignore just how good they look

Also they are the only people making good hk33s

[frozen raven]

That is true

They are big drip

[harsh spire]

Also the sound they make when you hk slap it is just the best

And since it’s full steal you can hk slap it as much as you wants

[frozen raven]

“I can do the thing and nothing and nobody can stop me”

Baller

[barren kayak]

It isn't finished yet, I'm waiting for a zenitco style side rail and a rubber buttpad for the stock

[harsh spire]

@crystal rover @river bison I purchased another scar H the right one this time lol

[river bison]

@harsh spire @honest meadow

Time to get to work

[harsh spire]

Oh hell ya

How does it feel

Also nice Zenit brake lol

[river bison]

I haven’t shot it yet I’m in the middle of gutting it

[river bison]

Ikr

It’s temporary

[honest meadow]

Nice dtk-2 is kinda cursed but ig it fits

[barren kayak]

what about le dtk2 on my gun?

[crystal rover]

Nice

I should have a uh-1 repro and m600 repro coming in for my sr74

[harsh spire]

nice

[crystal rover]

Fr

[jovial gorge]

i mean aluh-auckbar or whatever

idk im American

[river bison]

@honest meadow @harsh spire

We’re getting somewhere

Just need to figure out how to wire the drum to the fcu

[tranquil plover]

Anyone have reccomendations for digital nods that don't suck complete dick lmao?

[crystal rover]

https://nightoperators.com/products/night-operators-pro

[harsh spire]

That things gonna be fuckin scary when it’s done lol

[river bison]

Lol I had to to resplice the wires

For the drum mag

[harsh spire]

@river bison are maxx hop ups good?

I want to give my scar as much range as I can

[crystal rover]

Yes

Cause it’s the only option you have

[river bison]

Yeah

Hahaha it’s alive!

[harsh spire]

Well then it’s a good thing they are good hopups lol

[upbeat tangle]

its like mp5 and then G3

[harsh spire]

It’s a 5.56 MP5 is about the easiest way to explain it to people

[upbeat tangle]

that foregrip part is exactly like on a G3

[tranquil plover]

Oh god, an hk33?

[harsh spire]

Yes

[harsh spire]

Yes they are made by the same company around the same time

[tranquil plover]

I've been considering a 53 myself

I want a shorter rifle/subgun/carbine ykwym but I also don't wanna get smg pouches yk

[barren kayak]

I wasted money to put a real eotech on my GBBR MP7

[honest meadow]

Not u on izu’s 240b

[barren kayak]

I know I was just wondering why I didn't get a compliment lol

[crystal rover]

That was a real waste

[cobalt pulsar]

Sight prolly cost more than the gun itself

[barren kayak]

the gun was like

300

the eotech was 600

lol

[barren kayak]

kinda was but atleast I get to brag about it

[crystal rover]

You can use it on a real gun if you ever get one

[gritty rampart]

yes they can be a little finicky to get working but once you do they shoot beams

[frail summit]

anyone actually using baofangs for team coms during games or do you just do it for coolsoft

not judging the latter

[harsh spire]

Baofangs can be tracked so I’ve never fucked with them

At games where I need comes I’ll just text my friends but most of the time where never farther then 20 feet away from each other

[honest meadow]

my friend brought some baofangs along to a game once that he had spare and it was pretty useful for those moments when u dont want to shout and give away your position or your just out of earshot for clear coms

[frail summit]

every radio can be tracked even military and law enforcement ones ones although those are enctryed but encryption only stop them listening to what you say not where you say it from

[harsh spire]

Baofangs are trackable rather easily from what I’ve been told where as it would take professionals to track something a bit more robust

[frail summit]

hmm yes but mostly because of the person using the radio not the radio its self but you can also use repeaters to fake ur location so if someone tracks you they find the repeater not your house

the the black line represents the range of your radio transmition

if you set the wattage to the bare minimum it reduces the risk of a "spy" hearing you transmition and being able to track you

some baofangs come with max transmition power by defult so you might be transmitioning you voice for 3km instead of 300m

and that's theroeticly 21.2 square kilometres where someone could be listing to you from whithout your intention

you can also get jammers but that's not advisable because you will get arrested lol

[frail summit]

also why are you worried about beinf tracked while playing airsoft?

[harsh spire]

At large scale events like Milsim west getting tracked can cause a lot of problems for your fireteam/platoon

Just don’t want to be the subject of a massive ambush

[frail summit]

they really go into that much detail in those milsims that fucking awesome tnh

[harsh spire]

Ya it’s cool

These events happen on properties thousands of acres large and getting tracked can bring down an entire assault/troop movement

I just don’t want it to be my fault lol

[frail summit]

well if thats the reason there are military radio protocols you can use to minimise it

[frail summit]

but tbh i think that just the guys who justified buying 800 dollar to themselfs trying to justify it to others

[harsh spire]

I don’t even know where to get those radios lol

As far as I’m aware all the ones on the market are stolen

[frail summit]

now days you can make drones that have scanners and directional radio tracking on them link it to a atak system and you have a map of all the radios it can pic up

cross refrance that with your teams known postions and then that that point you have irl wallhacks

well not really cus its not actually that simple at all

but kinds

kinda

[honest meadow]

why do you guys not spend 20k on ultra long range radios u can carry on ur person that "fell out of a truck"

[frail summit]

cus that screams im too over weight for the real military but i can use bb guns XD

[river bison]

It’s for people with fuck you money

[frail summit]

nah for real im just jelly

i wish i have fuck you money

[river bison]

@honest meadow I created a monster

This thing eats up BB’s like crazy

[honest meadow]

the 240?

[river bison]

Yup

[honest meadow]

sick

[river bison]

Fusion engine is overkill I need to tone down the ROF to a realistic level

[honest meadow]

whats it firing like rn

[river bison]

25

I also had to splice some wires

What’s funny was I reversed the polarity by accident and caused a jam on my drum

The good news for AEG folks is the gearbox is easy to work on

[river bison]

Lol that’s so cursed

A fuckin short dot on a 240

[frail summit]

thats snazzy

you seen the REAPR

[honest meadow]

The reapr looks bad ass need a airsoft version rn

[honest meadow]

That will most definitely hold zero trust

[river bison]

It should since it’s not a Daytona haha

I should DG it sometime this year

[river bison]

So tiny

[gritty rampart]

most dont i have talked to a number of people who have went to milsim west and most said that they rarely ever personally used a radio

[river bison]

For my team we used radios extensively

Then again my team and I are mostly active duty military so that’s what we’re used to

[river bison]

This thing will always be a CQB monster

[gritty rampart]

clean build

[gritty rampart]

thats cool im trying to get me and my friends to start using them but they keep breaking beofengs are Chinese pieces of crap

[loud palm]

@kind orbit

[river bison]

@honest meadow @harsh spire 2 more Romeo8T’s

I really love these

[harsh spire]

nice

good looking optics

[honest meadow]

yea tbh im interested in a Leupold lco with the goofy 6x magnifier idgaf if they're ass they look cool asf

[wet jay]

niceeeee

[slender salmon]

“Don’t peek that”
Me fr

[river bison]

Actually looks better with the Romeo

[slender salmon]

sick dude

[frozen raven]

Bro got the BOX

[proven pike]

Archwick?

[river bison]

No actually

It’s the arrow arms APC9k HPA’d

[proven pike]

Ah nice

I was going to gut one and chuck the internals into a custom pp91 kedr receiver

Cos I can't be fucked designing a whole gbbr system for a one off gun

[gloomy crypt]

vfc m27 with VCOG)

[gilded marten]

this gives me M2 with a scope vibes

[harsh spire]

Hot

I was trying to track one down for milsim west but ended up just going with a scar H instead although I still want to get a M27 some day

[river bison]

I’ve been neglecting mine lol

[misty flicker]

my man has the weapon rack hideout upgrade

[barren kayak]

How do I attach this to a triangle stock

It slides on but not securely

[harsh spire]

I believe there is some sort of Velcro strap

[frozen raven]

Velcro or leather strap it should friction fit as well

[river bison]

Jesus my M240 scared tf out of everyone today

My only issue is it consumes so much air

[harsh spire]

Lol nice it should

[river bison]

I might have to do a dual tank setup after all

[harsh spire]

That’s a thing

[barren kayak]

Can I use paracord?

[harsh spire]

I see no reason why not 🤷‍♂️

[barren kayak]

Ok

What do you think of the build btw?

[harsh spire]

Looks really clean

[honest meadow]

nice but the eotech is a bit far foward

[slim apex]

W.I.P ghillie

[frozen raven]

God forbid the man put it there because he like it that way

[cobalt pulsar]

I like how it look

[cobalt pulsar]

SECURE THE BUTTPAD!!!!

[glacial sparrow]

Get small tanks and stick em in the SAW pouches under your arms

Idk if anyone actually makes a tank that would fit in the SAW pouches tho tbh, it just sounds like it'd be a neat idea

[honest meadow]

The vfc saw box mag tank could work

[glacial sparrow]

How serendipitous, someone makes something for the express purpose of doing exactly the idea I had

[honest meadow]

Nah vfc make it for their gbb saw

Acc im not sure if it would work or not

I think its a hpa tank

It might be a green gas tank tho

[glacial sparrow]

Izu said air so I assumed he was talking about an HPA setup

[honest meadow]

Yea he is

[barren kayak]

im gonna very soon

paracord right?

[cobalt pulsar]

Usually they come with a special velcro strap

That goes trough them and lets you secure it

[barren kayak]

mine is airsoft and didnt come with one

[cobalt pulsar]

Weird

I got one and mine is airsoft aswell and it had it

[barren kayak]

is there anywhere I can buy the velcro strap separately?

did you get yours from LCT?

[cobalt pulsar]

No

[cobalt pulsar]

No idea

[crimson walrus]

I've been wanting a AKS-74U https://www.evike.com/products/48434/ dis good?

[glacial sparrow]

that looks like the cyma 045 so should be good

[crimson walrus]

Thanks for the help

[glacial sparrow]

👍

[harsh spire]

I have the 042

Solid rifle

Thank god I’ve never needed to work on it tho

[glacial sparrow]

Trade it for an 048

[harsh spire]

Hell nah

It was my first rifle and it’s ebb

Plus it’s outlasted VFCs krytacs and basically any other cyma I’ve owned

On this day my vfc and my other cyma back up rifle where both out of commission for one reason or another and this one kept going

[final rune]

Is there a good airsoft ak-12 yet?

That's not chinesium garbage

[harsh spire]

there are several and there have been for years lol

arcturus makes a great one (best internals) E&L makes one LCT makes one (best externals sub par internals) and i think G&G makes one for some reason

[final rune]

What about a GP-25 clone that would actually mount to a Saiga 103?

[harsh spire]

are you putting an airosft GL on a real gun?

why

[final rune]

for fun

[harsh spire]

but as long as it is a normal AK it should be fine

[final rune]

Because: "Engraving provides no tactical advantage what so ever." or something like that.

[crystal rover]

also arcturus

[harsh spire]

i said arcturus

[crystal rover]

i missed it mb

[harsh spire]

i have the arcturus one and it is to this day my workhorse rifle

[crystal rover]

my work horse rifle is currently my cyma sr74

cause its my only working gun

well actually not any more

i got my sr-25 back

[harsh spire]

the AK12 is just the most consistent gun i own its never given me any problems and its way lighter then my HK33

the HK33 is super fun but it gets old lugging it around all day -someone who ran LMGs for the past 2 years

[final rune]

you have a pic of your ak-12?

[harsh spire]

yes

[final rune]

[harsh spire]

its the K so its shorter more akin to a AK-105 in length

[harsh spire]

quickest pic i could find

[final rune]

np

[harsh spire]

that is an LCT drum i had to brutalize to get it to work

[final rune]

what's a full size ak-12 gunna run me?

[harsh spire]

$375 depending where you get it

[crystal rover]

atleast 2 dollars

[harsh spire]

are you in the US

[final rune]

ye

[harsh spire]

due tp its popularity its constantly out of stock

but evike might have it

full length is out of stock the K is not tho

[night kettle]

jack

[wheat isle]

did you rattlecan a 6094

hope thats a repro lol

[harsh spire]

Yes I did and it’s not repro

It was an air force issue one so it was in ABU

[wheat isle]

does the fabric harden or smell of paint

[harsh spire]

Nah

Def no smell and the fabric just feels like normal 1000D cordura

(It’s an old gen)

I don’t have that carrier anymore I friend bought it off me but a buddy know did the same set up and his is still fine

[quartz sparrow]

That looks sick

Is it a kit build?

[harsh spire]

wdym?

[quartz sparrow]

Is it one of those ak74 cosmetic kits

Idk what they're called in english lol

That come with the handguard and stock

[harsh spire]

its a actual AK12

[quartz sparrow]

Cool

[low umbra]

km-ak/ak-74m3

"obves"

[slate leaf]

Fuck using foam plates in airsoft, Running this while playing airsoft like a real man /s (I know it’s currently lacking pouches, those are in a box 2 feet to the right)

Also Esapi IV plates next lol, AR-500s are a tiny bit too heavy for my liking

[broken storm]

noice

[umbral pilot]

Airsofters having the urge to spend 800 dollars on ceramic/steel plates not realising how the unnecessary weight will just make them have an uncomfortable game

https://youtube.com/shorts/kkR2yqKeyPk?si=QASUWKjyrKaIFRuV

[umbral pilot]

I like how you have a whole bunch of different camouflage on your kit

It gives sort of a post-apocalyptic or stalker/scav vibe. I plan on doing something similar with my kit though I mainly use a plain green outfit with a green ruin camouflage hat

[lost dove]

I mix match from time to time but I did it that day because the higher it got the greener it was and the lower the darker

I love mix matching personally

[lost dove]

Danke

[slate leaf]

Should I bring my $3,000 thermal optic to the field next week? + a good plate carrier isn’t gonna make it terribly uncomfortable to play. I can wear that thing for 40 hours straight with minimal fatigue. If you want fast paced go play paintball.

awaiting eg’s response

[umbral pilot]

It is unnecessary armor that you'd realistically never use. You won't get hit by shrapnel or pistol rounds you will be hit with balls. Also are you implying that airsoft is slow-paced?

Like sure if you have that much money then go you and spend them on such equipment but I personally will never spend them on that unless I plan on becoming some kind of a PMC or security agent

[slate leaf]

I’m implying I have real world uses for the plate carrier excluding airsoft. Airsoft allows me to utilize the plate carrier in a (horribly) simulated combat scenario to determine if my plate carrier setup is adequate. It’s obviously a whole lot more than just airsoft that I use to determine if it works well for me, but it’s also just enjoyable larping around with thick ass plate carrier. I run 6 miles daily in the thing, it’s not like I’m a meal team 6 operator lmao

[slate leaf]

Also your right on the money with the PMC/Security part.

actual PMC plays tarkov wow

[umbral pilot]

Yeah that's fair by me. However there are some people who spend this amount of money on plates just so that they can drop on an airsoft field and act like some tacticool guy which is just baffling to me

But that's maybe because I'm not coming from a family that has such an immense income in order to afford that kind of stuff

[umbral pilot]

Oh damn so you are a PMC?

[slate leaf]

Yea

[umbral pilot]

That's pretty cool

[slate leaf]

Totally still gonna Larp in airsoft tho haha

[umbral pilot]

I hope you won't get deployed to protect a random ahh oilfield in the middle of nowhere

[slate leaf]

Lmao thanks

More so container ships right now

[umbral pilot]

Well you already have a need for all that equipment so it makes sense to do that even though the hobby isn't really that realistic of a simulation

[umbral pilot]

That's kind of neat. It would be cool if I try getting a little tugboat someday and drive around the waters someday

[slate leaf]

Got an early 2000s Blackwater PMC kit I wear when I play airsoft, funny as fuck when people realize what the kit is. Also the training. When I first showed up at my local field a few dudes were wondering if I was Law Enforcement/Military lol.

[slate leaf]

Oh yeah, not a chance it’s very realistic

[umbral pilot]

Oh yeah it does kind of look like a law enforcement style outfit lol

Is Blackwater still around actually?

[slate leaf]

Yeah, under a different name now

Academi I believe

[umbral pilot]

I see

[slate leaf]

I don’t work for them tho, work for a much smaller defense contractor

[umbral pilot]

I wonder if I should try doing something like that as a plan B or C. Is "enlisting" hard or it depends on the contractor?

[slate leaf]

Depends on your prior service and/or skillset

Ex-Military is how most guys get into contracting

[umbral pilot]

I see

[slate leaf]

Here’s the AEG I’ve been using for a while, somewhat similar to my real one, lacking a flashlight, and a legitimate PEQ-15, along with a much cheaper scope and foregrip

$300 LPVO works just fine for airsoft though

[umbral pilot]

Looks pretty badass especially with the scope

[slate leaf]

Thx

[slate leaf]

Got a Vudu 1-8 on the real thing

Was questioning if I should get a Tango-6T

[night kettle]

n7?

[glacial sparrow]

Yesnt

Weighted plates are necessary

Real ballistics not so much

Plate carriers especially kitted out won't fit right with weightless plates

[honest meadow]

yea they switched names multiple times in hopes ppl would forgot the awful shit they did hasnt worked tho

[honest meadow]

Im on the far right

Met up with some of the boys

[gritty wyvern]

N7 milsim

[river bison]

Seeing new faces here

lol

[river bison]

A lot of dudes in my field do this with their work kit

Like it’s literally there and you get abit of training value from it

I do the same with the AVS and plates

I also try to make my replicas as close to an actual setup as possible

Then again my field is inside an actual military base and majority of the folks who play are military themselves including myself

[quartz sparrow]

Nice pair of ak12s

[honest meadow]

yea my mate on the lefts mags are twi molot 45 rounder that he made a hicap for his rpk and he has bakelite and black polymer real mags that are converted to airsoft mags

[river bison]

I had to zip tie the ammo bag on the mount to keep it from sagging

I hate the fact that bullgear M240 drums are always out of stock

[minor ingot]

I need that butt pad so I can get more recoil reduction and ergo =3

Some one bought all the dog legs

[noble wasp]

anyone know a cheap lvpo scope? or a 1-4x

or 1-6x

[river bison]

Victoptics 1-6X in Amazon

[noble wasp]

thanks

[glacial sparrow]

Yeah and you need weighted plates anyway

Not necessarily real ones but weighted ones are really important for the carrier to fit right with a combat load

[river bison]

Lol the awesome thing about the AVS is that it doesn’t sag

It has a harness system that provides structural support, also makes it more comfy to wear with weight

I can wear this thing for days

And I have

[honest meadow]

you pay for it tho haha

exspenny

[river bison]

Pay to play

Or be a ranger

Or SF

Lol

[honest meadow]

i'll stick with my pantsir for now

my mate has started running a crye cpc that his mate that left for the army left him to use/keep safe

looks a bit blursed for our rusfor kit but it is apparently comfy as

he's in the middle

[river bison]

What I don’t like about the CPC is it’s not scalable

With the AVS I can run it light

[honest meadow]

yea igwym

i mean for rusfor its perfect every kit is heavy maximum capacity kit

unless its a recon kit

[glacial sparrow]

harness based plate carriers be like

Crye SPC is borderline unusable without weighted plates

[hidden crown]

oh shiiii yall do airsoft

[glacial sparrow]

Yuh (I need to hem my pants so they fit ik)

[vague bluff]

W multicam

[glacial sparrow]

Everyone runs it for a reason imo

[vague bluff]

Most other options suck or are overdone.

[glacial sparrow]

I don't think it's so much that other options suck

Moreso that most people don't know how to make the other options good

Multicam is like the gold standard so it's easy to make a good MC kit if u do ur research

[harsh spire]

well fuck it looks like im gonna have to go into the gearbox to swap the springs on my scar H to make it feild legal

[glacial sparrow]

specna edge quick change spring my beloved

I take comfort knowing that if my specna ever chronos too hot I can fix it in 2 minutes

[vague bluff]

See, when I built my kit, I was taking inspiration from my DayZ character, which worked perfectly. Lemme find photos.

[harsh spire]

cyma QBS is best quick change imo but specna is good

[glacial sparrow]

Wouldn't know, never handled qbs

[harsh spire]

its nice the buffer just rotates out and you have instant access to the quick change

[glacial sparrow]

when i first started my kit i didnt know what the hell i was going for. i think i originally wanted to do a black and tan kit, realized that was stupid for a first kit, and then eventually started getting multicam

at some point i decided to only buy real/good gear and i am very glad that i made that decision lol

i only burned like $200 on shit gear before i resolved to only get good shit

[glacial sparrow]

(first kit for reference)

mid teen years were dark times

[vague bluff]

Le photos

[glacial sparrow]

honestly

surprisingly close recreation

[vague bluff]

It’s pretty easy considering it’s a survival game

[glacial sparrow]

i think i have the pistol your dayz character has irl

one sec

[vague bluff]

Loool

[glacial sparrow]

This it?

[vague bluff]

Break-action in-game

But fire

[glacial sparrow]

Ah damn

looked really close

[vague bluff]

My favorite pistol in that game is the FNX-45, influenced a real-steel purchase. One sec

[glacial sparrow]

the scoped bolt action pistol is still possibly the weirdest firearm i own

the eye relief on it is arms length lmao

you have to hold it outstretched like you're in an 18th century duel

[vague bluff]

ATF’s ready to regulate that thing 😂

.45 with an adaptor for a .50 “universal” suppressor

✨👌🏻

[glacial sparrow]

The only can I own is a .338

I don't know if I'll keep it

Might sell it sooner or later and use the money on a 5.56 can instead

[vague bluff]

Pretty niche tbh

[glacial sparrow]

I just don't shoot scoped rifles a lot

[vague bluff]

Go for a .30 suppressor

[glacial sparrow]

And I only have a single .338 rifle

[vague bluff]

Shiiii

[vague bluff]

Snag one of these and run 5.56 and 7.62 through it

[glacial sparrow]

Whereas realistically I'll probably end up with several 5.56 guns

[vague bluff]

^^^

[glacial sparrow]

What lke the banish 30?

[vague bluff]

Didn’t have one in mind tbh

[glacial sparrow]

huh

Looks like you can effectively run anything 7.62 and smaller through a .30

neat

[vague bluff]

I’m more of an AK guy so I personally have a PBS-1 for my AKM.

[glacial sparrow]

hold up let me show you my AK

If you're an AK guy

[vague bluff]

Ouuu

[glacial sparrow]

Saiga import. Came with a rifle stock and never repainted it to match once we swapped it out for a rifle grip and stock

[vague bluff]

God that is sexy.

I have no pics of mine 😭

[glacial sparrow]

It's honestly a joy to shoot

Entirely due to the rubber buttpad

[vague bluff]

Didn’t see that at first.

[glacial sparrow]

Legit I feel the recoil from the AK less than I do with my AR

[vague bluff]

I can’t even think of an argument. 😂

[glacial sparrow]

Not that it really matters

AKs and ARs barely have recoil that actually affects anything

[vague bluff]

^^
My only complaint is that the handguard I would personally swap.

ZenitCo baybee

[glacial sparrow]

Yeah, I never plan to bother kitting that one out so meh

Working on my airsoft m4 rn primarily

New rail is on the way, along with a foregrip and sling adapter for it. Switching from peemod to Mlok

[vague bluff]

Not a Tarkov-based opinion either. I recently just started.

I’m working on a parts list for an M4 as it was my primary in DayZ

Then a FAL

[glacial sparrow]

The new rail is grey cause that color was half-off and I intended to repaint all the furniture anyway lmao

[vague bluff]

Yuhh

[glacial sparrow]

Gonna repaint all of the tan bits n bobs to be rang green

Ignore the shit weapon light

was a gift and i didnt want to be disrespecful by not even putting it on lmao

[vague bluff]

Yeahhhh was gonna say.

What’s that sight?

[glacial sparrow]

Also swapping the optic out for a real one as soon as I stop being lazy and make actual lens protectors

[glacial sparrow]

You don't wanna know

($12 chinese red dot)

[vague bluff]

Looks like a Kobra and an OKP-7 inbred 😭

[glacial sparrow]

I have a trijicon MRO lying around I'm gonna swap it out for

Since it's just airsoft I'm not concerned about the frankly grievous parallax on the MRO

[vague bluff]

Bro I need to suck it up and buy an RMR.

Two, really

I love canted sights 😭

[glacial sparrow]

I need a sugar mommy to get me an eotech with magnifier

[vague bluff]

Have the EoTech

An old Gen-2 551, but got it

[glacial sparrow]

I intend to put a streamlight HLX and a DBAL or AN-PEQ on this

[vague bluff]

I mess with Streamlight

PEQ would be slick

[glacial sparrow]

Also wanna swap the stock out for this one

[vague bluff]

Magpul?

[glacial sparrow]

repro magpul I think

I don't buy real stocks for airsoft guns just because of worries about battery space

[vague bluff]

Gonna say, I used this stock a TON in DayZ lool.

For airsoft I run either a full-stock AK or an MP7, battery space has barely been an issue

[glacial sparrow]

Once I can actually pick one I also wanna put a tiny curved handstop on the very front of the rail. Similar to the front of the rail of my real AR-15

[vague bluff]

That looks like a bayonet lug 👀

[glacial sparrow]

I've considered foregoing a foregrip entirely in favor of just C-clamping the rail

[glacial sparrow]

Nah. It's just that the front of the handguard curves down to double as a handstop

It's kinda obscured in that pic cause of the sling mount

[vague bluff]

Ah.

In that case Handstop or cut a foregrip in half at a 45-degree angle

[glacial sparrow]

It depends on how my attachments end up

the main reason I'd just start C-clamping instead of a foregrip is pressure switches

[vague bluff]

Not a fan, personally.

[glacial sparrow]

For airsoft, at least. I prefer C-clamp for real steel regardless

[vague bluff]

Valid, anytime I ran a light it was always above my left hand where my thumb rests.

[glacial sparrow]

Can you believe I used to shoot like this when I was like 8-10

Certainly a stance of all time

[vague bluff]

Instantly was about to call out the chicken wing.

Russian Manual of Arms baby

[glacial sparrow]

Dw it got better

Shortly after that pic I also realized I can weld with my chin instead of my whole cheek

So now I'm not breaking my fucking neck every time I shoulder

[vague bluff]

I have a unique issue.

I’m blind in my right eye and shoot right-handed.

[glacial sparrow]

LOL

holy shit that's unfortunate

[vague bluff]

Actually works perfectly for AKs specifically

[glacial sparrow]

Sounds like it's time to buy an ambidextrous mag release, bolt catch, and selector and hit the range

[glacial sparrow]

Brass doesn't headshot you every time you shoot?

[vague bluff]

How? I’m right-handed?

Using an EoTech I can weld with my right cheek and aim with the left eye

[glacial sparrow]

ah

I was assuming you shoulder switched

[vague bluff]

GOD NO

[glacial sparrow]

ambi shooters >>>

I fully intend to learn to shoot ambi sooner or later

[vague bluff]

I learned full-ambidexterity in baseball of all places

Start with pistols

[glacial sparrow]

I will learn ambi shooting by starting with M4 killhouse drills

This can only end well

[vague bluff]

😂😂

[glacial sparrow]

shit i stayed up too late because i took too long working out tonight

[vague bluff]

turns corner flagging every friendly in sight

[glacial sparrow]

low ready ftw

[vague bluff]

High ready even more ftw

[glacial sparrow]

Nah

See the reason I run low ready most of the time as opposed to high ready

It improves your odds, however slight, of getting shot not shattering your pelvis

Cause if you get shot and it fractures your pelvis, you'll just fucking fold

[vague bluff]

While true I got in the habit of high-ready for a reason.

[glacial sparrow]

still alive and conscious and everything but your body cant support itself at all anymore so you just DROP

[glacial sparrow]

stacks?

high ready is good for moving in stacks yeah, and so you can break someone's fucking nose with your mag lmao

also it's (I feel) faster to shoulder from

[vague bluff]

Sitting at my desk everything that could go wrong WILL go wrong to my right. I have a Benelli M3 clone sitting beside my desk loaded with slugs I’m gonna dump through my door

Push out and immediately swing left

[glacial sparrow]

I'm just irrationally scared of a bullet fracturing my pelvis and dropping me while I'm awake to feel it

[vague bluff]

Can’t be me

[glacial sparrow]

Honestly

[vague bluff]

I’m barrel-striking you with a twelve-gauge

[glacial sparrow]

If I ever get shot and it breaks my pelvis and I just crumple

Just put one in my head at that point

[vague bluff]

Genuinely

Gonna be in so much pain and crippled for likely ever

[glacial sparrow]

would genuinely rather that than either the pelvis tourniquet things, or the old school method of, I shit you not, KNEELING INTO the shattered pelvis

[vague bluff]

NOPE

[glacial sparrow]

Before they made the belts that hold your pelvis together when fractured, standard practice for someone who had it fractured in combat was literally to kneel into it

[vague bluff]

My pronouns are “Immortal/Fuck You,” but good God would I ever want to die.

[glacial sparrow]

I think the idea was that kneeling into it would hold it kinda together and in place

[vague bluff]

I see the thinking

But NO

[glacial sparrow]

Yeah like, I have a pretty high pain tolerance, but if you did that to me I won't even lie I'll be screaming bloody fucking murder

just fucking old yeller me at that point

id rather be put down like a rabid dog than live through that shit

[vague bluff]

Instead of rabies and foam it’s ouchies and dome.

[glacial sparrow]

I've already told my buddies that if shit hits the fan and we're alive for the inevitable ww3 or american revolution 2 social boogaloo, if my pelvis gets fractured, just put me out of my misery

Especially cause it ain't like there'd be a hospital to take me to at that point

[vague bluff]

Not on any psycho schizo shit but I’d like to see it go down.

[glacial sparrow]

sounds like some psycho schizo shit ngl

[vague bluff]

😂 Worth

[glacial sparrow]

you literally sound crazy rn you should be medicated

gaslightling? what's that? you're making that word up

[vague bluff]

I suffer from living in a state where I can LEGALLY recreationally smoke LEGALLY and own a firearm.

I’m not even 21. 😂

[glacial sparrow]

I do both of those things and only 1 of them is legal kek

[vague bluff]

Good thing it’s ATF and not AMF

Cheers to a bowl

[glacial sparrow]

the other night I was 5 shots and 2 bowls in on an empty stomach before i threw up and went "fuck it im goin to bed"

[vague bluff]

Great ideas for the responsible gun owners 💯

[glacial sparrow]

i keep them all locked up dw smh

[vague bluff]

I lock up ammo and magazines because my guns are fidget toys

Use airsoft/dummy mags in compatible guns when I can

[glacial sparrow]

Oh my god literally

Sometimes I'll just sit there and unload, reload, chamber, unload, eject, my handgun ad nauseam

which is probably why that specific handgun has such a comfortable slide and slide catch

whereas the nice 1911 i had, had the stiffest fucking slide catch and slide ive ever felt

i struggled to release the slide catch with both hands on that fucking thing

[vague bluff]

I have some Hi-Capa’a that have buttery slides, felt

[glacial sparrow]

that gun was beautiful, and yet, i hated it bc of that

[vague bluff]

My FNX-45 I broke in nicely. Been practicing my concealed-carry draw for when I turn 21.

Can air-rack 🥹

[glacial sparrow]

1911 in question

(unloaded, it was only cocked because had been in the holster)

[vague bluff]

I hate Smith and Wesson but the pistol itself looks nice.

Love the grips

[glacial sparrow]

i dont have it anymore sadly

didnt make it away from the inheritance draw with that one

[vague bluff]

Ripp, also imagine not carrying in condition one with a 1911 😂

[glacial sparrow]

granted, the inheritance draw hasn't happened yet

dad just showed up and took that one

[vague bluff]

Big F

[glacial sparrow]

i dont even care ngl

i hated that fucking gun so much

it had one of the nicest trigger pulls ive ever felt but even with both hands pressing as hard as i could i could barely release the slide

desperately needed a shim

[vague bluff]

Or some lube.

[glacial sparrow]

i tried that

that model just had such tight fucking tolerances

a blessing and a curse

god i need to go to bed

Enjoyed talking to you man, gonna hit the hay now though :)

You play Helldivers 2 by any chance?

or any of these

[vague bluff]

And the stupidest warning on the slide

Sadly I don’t. Mostly just a Tarkov and Mortal Kombat bum.

[glacial sparrow]

Gotcha

[vague bluff]

Feel free to hit me up in DMs though, could always run some raids or talk more about the substances we enjoy.

Discord mod moment 💯

Have a good one.

[lost dove]

not so bean kit

[left mason]

Nice kit, but ratnik are better

[lost dove]

I love my Ratnik kit but I've got a spot in my heart for desert storm

[analog glacier]

Bros a little midget

[lost dove]

indeed

[barren kayak]

Finished my Spetsnaz AK105 build

[honest meadow]

please put the muzzle on straight

[barren kayak]

It is on straight

It's the angle that makes it weird

Other than that what do you think?

[honest meadow]

looks pretty good

would be elevated if you went full zenit

stock pistol grip foregrip

[slate leaf]

Guys does anyone here have knight mask irl? I made one but it looks kinda sucks i need so good scale if anyone could help me

[fickle geyser]

noice

[cobalt pulsar]

The guy on the left mogs

[rapid wolf]

been wanting an m4a1 for a while now, figured might as well get back into gbbrs so picked up a tm mws

just need to get a different pressure switch for the light and a metal nozzle return spring and should be good to go

mags are gonna be a pain in the ass to get though

[glacial sparrow]

m4 gbbr mags are easy to find

[rapid wolf]

mws mags are out of stock on evike which is really the only place i order from without having to go international shipping

[glacial sparrow]

you can find them on kyairsoft, jk army, mir tactical, and other places

[rapid wolf]

im in the us

which is why i said i mostly order from evike

ill either go 2nd hand or just bite the bullet and get it overseas

[novel fractal]

https://cdn.discordapp.com/attachments/749424452571496499/1219518056368443413/photo-output.png?ex=660b97b2&is=65f922b2&hm=5bc2fc3ea3a49bca63f134f3cb36f92a68525b7b36dcd60a9932510b0fd45e11&

2018 SOBR bulat kit with my new GHK

[long parrot]

why u look like a woman?

[lost dove]

the will of Allah.

[long parrot]

okay

u not woman?

[umbral pilot]

Scavving is my passion
Scavving is my life