airsoft

[inner cedar]

So I should get .20 bbs of what brand and the lct bigger mag with the wheel on the bottom is best?

[honest meadow]

yea thats why i only run midcaps but for your use case yea id just get a hicap it'll be less hassle

[honest meadow]

in the US i hear elite force bb's are good quality

[inner cedar]

ok thanks

[muted bloom]

do you play inside or outside

[inner cedar]

inside

[muted bloom]

then just go with light ones

20

[inner cedar]

I could not find anything smaller than 20 that was good

[muted bloom]

since you dont have wind messing with the trajectories

[rapid wolf]

use .20 as a minimum

dont go lower than that

[muted bloom]

20 is the smallest

[inner cedar]

my lct midcap is messing up on me

[muted bloom]

pretend smaller than that does not exist

[inner cedar]

I bought a 500 rnder with the spinner on the bottom

[muted bloom]

cause anything smaller than 20 should not be used in anything other than springers that are cheaper than 10 bucks

it can and will fuck up your gun, same with cheap bbs in general, invest in quality, you wont regret

[rapid wolf]

brand for .2 bbs and above usually doesnt matter

[muted bloom]

G&G and Tippman bbs i have heard are good, i prefer BLS bbs myself

[rapid wolf]

theyre usually all the same

[muted bloom]

I mean, lancer does bbs and i would probably not feed my gun lancer anything

[rapid wolf]

ive used lancer bbs and they fed fine in a 416 and sr15

[muted bloom]

most bbs are the same but there's a few shitty brands you gotta look out for, there's also this brand called diablo, but it's only a finland thing

[rapid wolf]

id just avoid their guns like the plague

[muted bloom]

they are basically floor bb tier studf

BLS is my favorite brand with bbs in my experience, good price to quality ratio, i can fire accurately to high distances

[inner cedar]

I got some random orange .12 gram bbs that explode when they hit things

[rapid wolf]

dont use .12s lmao

[muted bloom]

yea, maybe don't use those

[rapid wolf]

no wonder ur mags dont feed

[muted bloom]

don't want that exploding inside your gearbox

[inner cedar]

.20 would work fine with midcap?

[rapid wolf]

yes

[inner cedar]

[rapid wolf]

lmao wdym

[inner cedar]

we'll see soon

[rapid wolf]

u use .12s and wonder why ur mags not feeding lol

[inner cedar]

yes I'm new

[muted bloom]

also the mag is LCT right?

[inner cedar]

yes lct lc-3 140

[muted bloom]

yea the springs in LCT mags kinda suck from what i have heard

i always use cyma mags but idk if they fit in all guns

they tend to be a bit loose fit on nearly everything, they wobble a bit but generally fit, and never have feeding issues

the spring is as strong as i really need, i can fire at a pretty insane firerate with no feeding issues and i generally play with 028 bbs

they are hella cheap too

is your gun LCT?

[inner cedar]

yes

[muted bloom]

i googled their compatibility with cyma mags and got a bit mixed results

some say it works, some say it does not

[slate leaf]

Heyy, guys someone uses whenever WE G39 GBBR series ?

Is it worth buying and reliable?

I mean i know its very popular gbbr, but never heard it is worth or not

[low umbra]

@slate leaf the mags need modificafion

and possibly some steel internal part for the gun itself

[slate leaf]

What kind of mod

[slate leaf]

some people swear by WE. I personally wouldn't touch WE

[alpine silo]

why would you get 39 for airsoft tho?

if you wish to carry it irl to scare ppl who may attack you thats not a very good idea

[crystal rover]

Pretty sure the we g39 is a g36

[alpine silo]

oh mb mb

haha thought it was a glock not an hk

although we gbb rifles are not good their trigger group is terrible and they dont have an npas

[old latch]

If you're looking for a G36 I've heard the AA R60 is pretty decent, especially for the price. 200 for the gun and 35 for a mag over here, plus it comes with two mags already

[slate leaf]

I mean, i poland WE is only right choice due to lack of parts

I know VFC or DE is way bettee but theres no any VFC or VFC parts in polish stores

I dont want to shipping one part from fcking asia

[slate leaf]

GBBR's are fun. They're just waayyy more realistic than AEG ones

Even sounding better

[alpine silo]

ik i was just confused since WE labeled the gun g39 as of glock39

but it is an hk replica

[slate leaf]

Oh, cause WE named G36 rifle "G39" hahah

[alpine silo]

yeah

i dont own a gbb rifle but i got a buddy in my squad who is a mad gbb lover

[slate leaf]

Sigma

[alpine silo]

so i do get to shoot them once in a while and they are very nice

[alpine silo]

thats his black friday purchase

cant wait to test it

[slate leaf]

<3

Omg PP2000 with sniper scope

Why bud dont mount some sort od cqb sights like EOTech or Aimpoint 😭

[undone crag]

where do u guys buy ur guns?

@ me when u reply bc i dont really check this server often

[low umbra]

i just google the gun that i wanna buy and check some links

[honest meadow]

the real one is supposed to be a urban dmr

[slate leaf]

Taiwangun/gunfire and polish stores

Mainly Taiwangun

[low umbra]

sick

[muted bloom]

cool, although the muzzle device is kinda funny

[inner cedar]

just got some .25g bbs and the LCT lc3 mag had no issues at all with feeding and the cheap fast loader was super easy to use

no misfeeds at all with the whole mag

shot every one

[honest meadow]

Nah i fuck with the dtk-2 but he does have it on wonky the two small holes are supposed to be straight up and down ontop and the side ports should be 90 degrees either side

[rugged salmon]

How/where do you guys usually put grenades on your kit?

[low umbra]

rear/side of belt

[rugged salmon]

Do you use pouches or nah (if you do what type)

[low umbra]

no just let em hang

but just any mag pouches would work

[warm steppe]

Holy ShIT

[slate leaf]

Finally someone post good looking and practical build

[cobalt pulsar]

How do people spraypaint their aks in atacs fg?

[vale sentinel]

I have a choice, buy an aeg PKM or a GBBR Ak which is used, and has rails, scope lct stock etc, both are the same price

For the PKM i can save up and buy a GBBR conversion kit in like a year or so

[cobalt pulsar]

Does ars arma ship to germany?

Greyshop prices are insane smh

[ionic bough]

We should give Airsoft guns to orphans and make em storm a prison

Shit would be devious

[cobalt pulsar]

Whats a good site for russian clothes

[honest meadow]

For mine i just used 4 paints and some cut up cardboard

I can show you what when i get home

[cobalt pulsar]

Nice piece

[inner cedar]

since I got the good BBs it's been perfect feeding no issues with the lct mag

.25g

[rugged salmon]

they taste better too

[rapid wolf]

tracer bbs taste extra good 😋

[inner cedar]

just looked up how that works and it's interesting

just flashes intensely for a second

[cobalt pulsar]

Which sites are good for russian clothing? Except for greyshop cause those prices could be considered as robbery

[rapid wolf]

yea if you can mount a mock suppressor on ur gun look into getting a mock suppressor with a tracer mount inside

cool for low light

[atomic estuary]

this ones a double bell kar98k. picked it up for a total of 230 dollars :))

[lethal lava]

Oh okay, now yeah that's reasonable

[inner cedar]

I just discovered tracer units

With my g3 should I go NATO or Russian suppressor style?

i see a pbs 4 and also hybrid 46 etc

oh and nt4

[cobalt pulsar]

Nay toe

[low umbra]

nato would fit more

pbs 4 only looks good on ak and even then it looks ugly

[inner cedar]

[cobalt pulsar]

Until what temp are combat shirts wearable?

[low umbra]

i've worn them in hot summers like 30-35 °C/85-95 °F

[cobalt pulsar]

I meant more into the colder temps

[low umbra]

ohh right

i reckon like under 10 °C/50 °F?

is when you'd wqnt to wear something warmer

coz they're meant for hot weather right

[honest meadow]

russiancoldcamo russianarmyshop

[low umbra]

russianarmyshop takes forever to ship tho

[honest meadow]

depends i run a combat shirt when i wear my defender 2 emerald cause that thing keeps you incredibly warm

if your using a chestrig or smth light weight then yea i'd get smth fleece or a jacket over the ubac

[low umbra]

yea i've never worn more than a combat shirt and rig

[honest meadow]

worth tho they have so much stuff

[low umbra]

true

[honest meadow]

plus a month or two wait isnt bad at all really

[low umbra]

i been waiting 4, still waiting

[honest meadow]

meh depends on how much and when you get it

[low umbra]

1 month doesn't really count coz they forfot about my order

[honest meadow]

it is hard gettng russian equipment out the country

[cobalt pulsar]

I wanna get a jacket but I can't find many atacs fg jackets

[low umbra]

i remember looking for an atacs fg jacket specifically too lol

[inner cedar]

Any recommendations for airsoft supressor tracer activator for a g3 14mm negative?

[inner cedar]

I'm thinking of "LCT Z Series ZDTK-4 Mock Suppressor w/ ACETECH AT2000R Tracer Unit"

[chrome osprey]

buy a real G3 with supressor

[inner cedar]

no, the cheap ones break easily

[cobalt pulsar]

Did u find one

[rapid wolf]

if u are in the us then id get this https://www.evike.com/products/94270/

although the mid size bundle is out of stock so if you want a black mid length one then youd have to buy the supp and tracer unit seperately

[inner cedar]

Anything special about that one?

[rapid wolf]

i just prefer it

and it has super easy access to ur tracer unit once inside so removing or putting it back in is very simple and fast

[brittle ravine]

https://www.evike.com/products/10267/ been looking to get this as a first aeg, is it a good deal? and if not, what are some good alernatives

[cold sleet]

Are GHK guns worth buying and are they good

[night kettle]

daniel defense makes some pretty decent ones aswell for like 250-350ish

[rapid wolf]

are the cyma daniel defense mk18s any good? ive owned two cyma plat guns in the past and both of their mosfets shit themselves as soon as i put an 11.1 in there

[low umbra]

acetech

the muzzle device itself where you put your tracer unit in don't rly matter

[low umbra]

cyma are ass except for their plats and aks

[honest meadow]

Cyma is bullet proof aslong as you dont get the sportline wdym

[muted bloom]

their MP5s are good too

[low umbra]

yeah from the platinum series

[cinder compass]

mosfet will melt itself but as long as you replace it with a Titan you should be alright

[honest meadow]

Any vfc based cyma is good

[muted bloom]

nah all of them are good

[honest meadow]

The tokyo marui clones are ass

[muted bloom]

there's no mp5 tm clones iirc

that only applies to AKs

[river bison]

It’s a good platform to build off of

Because of the decent externals

[nimble depot]

Gate Titan inside and maxx hopup

I have a mlok BCM vert grip mod 3 coming in

[muted bloom]

yeah it is kinda shit

why the red parts? looks awful

[nimble depot]

Not red

[muted bloom]

whatever color that is, my screen brightness is pretty low

it does not look great

is what i mean

[frozen raven]

Most positive absolute Martin comment

[muted bloom]

nah most stuff posted on this channel is great

im mainly vocal about stuff i don't like

such as red parts

[honest meadow]

Arp9’s are kinda overated plus the pdw stock useless as to get any decent battery inside you have to have it fully extended which defeats the purpose

[smoky thunder]

Can’t blame you, anodized parts look like cheap amazon trash 99% of the time

It’s like bad COD skins but irl

Very tacky, more often than not tasteless

(These comments aren’t addressed at any particular build, just my general opinion)

Olight on the top rail is top tier funny tho

[night kettle]

pretty sure the dd ones are 11 lipo ready

[night kettle]

lowkey not fucking with the titan, 130 for bluetooth not worth the price of 2 perun's

[cinder compass]

yea I mean if you’re cyma plat budget nothing is wrong with a perun

[night kettle]

slapped a gate into a polymer ddmk

[cinder compass]

like dressing up a pig

probably got it pretty light I imagine huh

[night kettle]

wdym

[cinder compass]

polymer body = light gun

[night kettle]

oh yeah it’s like

3 pounds

slapped a m16 stock on it

[cinder compass]

I had a old CA magpul gun from like 2010 I got down to 4

should’ve never sold it

hi capas are more my thing anyways though

[night kettle]

prepare yourself

[cinder compass]

won’t embed for me

[night kettle]

it’s got 13:1shs gears a real deal piston assembly some shitty amazon 35k torque motor and the gate

[cinder compass]

oh it just did lmao

I’ve seen worse

[night kettle]

just got a maxx trigger i still need to put in

probsbly gonna end up selling it on hopup

[cinder compass]

yea hopup is easy money most of the time

[night kettle]

thinking 400 for it plus some midcaps

needs to be shimmed again tho

[inner cedar]

@night kettle please send properly formatted jpgs so they embed

[night kettle]

huh

[cinder compass]

doesn’t sound horrible but camera doesn’t do anything justice

[frozen raven]

I can’t say I’m a fan of anodized brightly colored accents but i def wouldn’t have said it out loud 💀

[night kettle]

i’m on phone rn idk how 😭😭😭

blame discord this update sucks so much for mobile

[cinder compass]

last hi capa I built

[night kettle]

clean

[cinder compass]

I literally have none of this now lol

[night kettle]

just saw this

recorded on an iphone 6 B)

[cinder compass]

legit got the same voice as me crazy

[night kettle]

great minds think alike

lets make out

[cinder compass]

lol lemme dm you a clip it’s weirdly close

[night kettle]

alr

[night kettle]

flashlight obstructed by the muzzle 😭 (its fine but WHY)

[river bison]

It’s normal for most lights mounted on a suppressed weapon

[rapid wolf]

yeah my light hits my mock supp as well

[night kettle]

actually I cant rlly talk I dont even run a handguard

[rapid wolf]

?

[rugged salmon]

Hey if I want to make my aeg a dmr is there anything I should upgrade other than the obvious stuff (spring, piston teeth, barrel, hopup)

[rapid wolf]

semi lock maybe if it means ur allowed higher fps

[stark ice]

https://cdn.discordapp.com/attachments/1174869770148003850/1182216279394897920/Screenshot_20231207-080516_Discord.jpg?ex=6583e3b5&is=65716eb5&hm=42cc543b79bc9807c87aa5ee2e61e053c91a7e830f4f96d854fea8e6fcd5b7a5&

vog granades thing

[stark ice]

u might need to upgrade gears, motor and semi lock the rifle if the fields u play on require u to semi lock the rifle.
where i play at u need semi lock on any DMR that shoots over 2.0j so check rules on field u play at and see if u need to do it.

hopup rubber/bucking could be a great upgrade too

[low umbra]

this go hard as hell

[old latch]

He's right, this is big important, Joules do nothing if you can't hit shit at range

[rugged salmon]

Yeah for my field I don’t think I need to semi lock it but any way do you think most stock metal gears would be able to handle stronger springs?

[stark ice]

depends on the quality and brand

[rugged salmon]

Yeah like stock cyma gears

[stark ice]

and how many joules u want to have

[stark ice]

send me a link to ur replica

[rugged salmon]

Prob around 2 joules

[stark ice]

u probably gonna need new gears if the current ones and not good quality, also u would probably need a new motor if u currently have the stock one.

[rugged salmon]

It’s just a cheap cyma 105 that I have laying around that I thought would be funny to dmr here’s the model btw https://www.evike.com/products/32773/

[stark ice]

but if u have the budget, upgrade ALL of the internals.

[rugged salmon]

Yeah that’s what I expected lol

[rugged salmon]

Ye

[stark ice]

howmany joules u have rn with what bb's

[rugged salmon]

Oh idk it’s not my main gun

Actually lemmi check rq

Oh wait nvm don’t have it in the same room as me

[stark ice]

ak105 is a weird choice for a DMR

[rugged salmon]

Yeah lol ik

Just wanted a dmr and had an ak 105 laying around and figured I could make it work with enough internal gutting

It was my dads gun but he got something lighter

But yeah when I get the chance I’ll probably gut the internals

Probably would be cheaper than buying a whole new gun to dmr lol

[stark ice]

i had to replace almost all internals on my AK cuz they were shit quality

[rugged salmon]

Yeah lol surprisingly mine has been going pretty strong

Unlike my mk47 lol

[stark ice]

i bought ASG Ultimate Upgrade series parts and they last me for a long time now.

[rugged salmon]

Yeah I’ve heard good things about their parts

[stark ice]

they also go for decent price

[stark ice]

what mk47 u got

[rugged salmon]

Yeah aren’t their motors pretty popular

[rugged salmon]

The cyma plat

[stark ice]

a

heard bad things about them

[rugged salmon]

So basically a trouble gun

[stark ice]

i want to buy double eagle mk47

[rugged salmon]

Yeah other than the looks they’re kinda crap

[rugged salmon]

Ye it’s just they don’t have that same authentic mutant vibe

But any way the gearbox for the mk47 is pretty good well shimmed and stuff other than the mosfet which will crap on you six months in lol

My hand guard also fell off bc it was held in by a pin similar to one that might hold your muzzle on

[stark ice]

didnt hear bad stuff about the mosfet but i would probably buy a gate titan before the stock one would shit it self

[rugged salmon]

Thankfully we replaced the pin with a larger stainless steel one and it’s pretty sturdy now

[rugged salmon]

Oh yeah the mk47 mosfets r crap

I went with the gate aster and it works really well for it

Also the hopups aren’t the best but aren’t as bad as ppl say

All you have to do to fix the HopUp is put a small o ring behind the adjustment wheels screw

[stark ice]

i would probably upgrade hopup rubber and leave the hopup unit stock

[rugged salmon]

Eh even the hop rubber is still fine

Hops .25s well

I’m prob gonna start using .3s soon though

Just bc my hop will do better with heavier bbs

Over hops .25s easily so I shouldn’t have to replace it any time soon

[stark ice]

i play outdoor so i need it to hop .28's or .32's, depends on how many joules im gonna go for.

might go for 1.9j

with .32's

[rugged salmon]

Same but my field is set up to where engagements are usually mid range

Bro it’s so sad

[stark ice]

field i play at is mid to long range, sometimes close range.

my 1.2j AK cant shoot accurate on long range

[rugged salmon]

Florida had a bunch of fields but COVID shut a bunch down now we only have like 2-3 in our state lol

Closest one is 1h 30mins away

[stark ice]

damn

[rugged salmon]

Ye I think my mk47 shoots about 1.6j with .3s

Could have gone down to 1.5 now after some of the seals are worn

But man the sheer amount of times I have had to open that thing lol

Lemmi find a vid of it shootin rq

[stark ice]

when i got my AK i had to open it 1-2 times a week for few weeks, something always broke.

[rugged salmon]

Yeah that’s airsoft ig lol

[stark ice]

so i decided to replace most internals and it preforms like a dream on close range

[stark ice]

but i accidentally put a bit too long air nozzle so it sometimes dont feed and i didnt bother fixing it, but now i will get new air nozzle tomorrow so it should work well now.

[rugged salmon]

It’s prob due for a shim job and new grease but it still shoots pretty well

[rugged salmon]

Sounds fun lol

[stark ice]

if it works, dont fix it.

[rugged salmon]

Ye fr

Less screechy irl as well

Idk why it sounds like that on vid lol

[stark ice]

yeah really "fun" when im in 1v1 and i try to shoot someone but my gun dont feed.

[old latch]

Also don't use a high speed motor and torque up gears. Those motors draw much higher currents for no reason. Use a high torque motor and high speed gears. I use a 19k with 13:1 gears in my DMR and it sips power, doesn't get warm even after firing for a while. Torque up gears (above 18:1) have no reason to exist as far as I'm concerned

[rugged salmon]

Ok noted thanks!

[stark ice]

i was hiding from a sniper that tried to find me, i try to shoot and took me 4 trigger pulls to feed a bb

[rugged salmon]

lol

[stark ice]

cant wait to fix my ak tmr and actually be able to hit everyone i see

[rugged salmon]

Yeah bro onetime my aster got de tuned somehow and it would randomly shoot on its own while I was in a crowded connection trying to defend it lol

[stark ice]

bro i borrowed my friend's 0.9j M4 once and holy shit i was on a huge kill streak

[rugged salmon]

Ye best feeling when something finally works

[rugged salmon]

Ye aks have that drip but m4s are just arguably better

[stark ice]

well i only was able to go on a huge kill streak cuz gun was feeding all bb's

[rugged salmon]

Better ergo and SO much easier to work on

[rugged salmon]

Yeah fair enough

[stark ice]

i actually like ergo on my AK but its heavy af so i get tired really fast.

[rugged salmon]

Yeah they have pretty bad weight distribution imo

Like my 105 is as heavy as my mk47 but the ak is just so much more front heavy so it feels a lot worse

[stark ice]

ngl my ak's weight distribution is good, its just really heavy cuz of all the metal.

[stark ice]

ak105 is probably way lighter than my ak

[rugged salmon]

Eh it’s like 6-7.5 lbs

[stark ice]

one reason im switching to mk47 is cuz of how heavy my ak is

but i still want the AK mag feeling

[rugged salmon]

Yeah

[stark ice]

mine is like 9.9lbs

[rugged salmon]

Idk why it’s upsideown

But that’s my current build

[stark ice]

nice

[rugged salmon]

Yeah this things shoots rly well after all the kinks r worked out

[stark ice]

my current build looks ass

looks like something from nuclear war

[rugged salmon]

Ye

Also man my dad just got a utr45 and that thing is smooth

[stark ice]

last pic i took of my ak https://cdn.discordapp.com/attachments/923935194262679572/1158746838950756475/20231003_144506.jpg?ex=651eb016&is=651d5e96&hm=8267772af36e6f47fd378517ce6d4e94bb25466eeca85237c7cb33b597869c29&

[rugged salmon]

Cheap and came with good internals

[stark ice]

and last good looking pic

[rugged salmon]

Oh yeah that looks sick

What lpvo is that?

[stark ice]

idk, bought it for 30$ on local markerplace.

but i dont have it anymore, sold it for 50$ xd

[rugged salmon]

lol sounds like a steal

Oh dang lol

[stark ice]

it was a steal, worked really well but useless for 1.2j ak

[rugged salmon]

Fr lol

[stark ice]

maybe will buy it back from my friend when i get 1.9j mk47

[rugged salmon]

Also man even with all the shortcomings of my gun all I have to say is atleast it’s not a kwa

Kwa SUCKS to work on

[stark ice]

yeah i heard a lot of bad things about kwa but never tried it before

[rugged salmon]

Yeah everything is proprietary

In some of their guns that have their stupid ver 2.5 gearboxes you cant even install mosfets

Without heavy modification

[stark ice]

never seen a 2.5ver gearbox

[rugged salmon]

Bro their tapper plates are also proprietary for literally no reason other than to have it proprietary

Took me forever to find the right part for my little brothers gun to change out the nozzle

[stark ice]

damn

[rugged salmon]

But ye it’s fixed now but his gun still sucks

Semi fire rate is terrible on his gun lol

[stark ice]

i think my fav gearbox to work on is ver 3, i only hate the trigger assebly on them tho.

always pisses me off when i try to put back the gearbox

[rugged salmon]

Yeah for me it’s the ver2 bc the springs r easy to deal with and m4’s generally have less parts to take off of the guns lol

But yeah listen to this

Wrong one my

[stark ice]

xd

[rugged salmon]

Mb*

Oops ig they’re all slowed down my again for bad audio lol

But anyway it does this weird half cycle thing if you pull it to fast

Oh here we go found it

[stark ice]

wtf

[rugged salmon]

But yeah I wanna throw up after listening to it

[rugged salmon]

It shoots a bit better than that now

But still it SUCKS

Never buy kwa

Unless gbbr I’ve heard ok things about those

But any way I gtg lol it’s like 4

[stark ice]

i hear only bad thing about their gbbr's

[rugged salmon]

Ok ye nvm then

lol

But any way good luck on your ak lol

[stark ice]

my friend was gonna buy MP7 gbbr cuz i bough one and he almost bought KWA

[rugged salmon]

I hate auto correct

[rugged salmon]

lol

[rapid wolf]

vfc mp7 is the best gbbr mp7 imo

[stark ice]

ye

i have tm mp7 and it works well

but all mags are leaking now so need to fix that

and its winter so cant use it rn cuz its cold af outside

[rapid wolf]

yeah cold weather sucks with gbbrs

i sold my gbbrs and went back to aeg cuz of the convenience

and im lazy

im kinda eyeing the apfg mcx rattler though

i want to take it back with me from asia

[stark ice]

yeah, i bought the mp7 at the wrong time so only got to use it 1 time

now i need to wait for spring

i might try to buy GHK gbbr ak for summer tho

[rapid wolf]

at least you can fiddle with it in your house while you wait for spring 😂

they are so satisfying

[stark ice]

ye, i randomly grab it and just play with it lol.

[rapid wolf]

i definitely did that with my gbbrs, just out of nowhere ill grab it and start playing with it

monkey brain like pulling charging handle and pressing bolt release

dopamine release

[stark ice]

lol

[smoky thunder]

1000%

The amount of times I do that in a day is autistic

[low umbra]

lmfao

so real

[low umbra]

if u got patience wait for vfc ak74m next year

ghk recently came out with their v3 which are an improvement from dogshit qc issues from v2

but idk, needs time to tell what's up with v3 too just like what happened with any other release

[stark ice]

i could wait

[low umbra]

it's worth it, full steel externals and internals, so far a lot of rs compatibility

all for the expected price of vfc's m4 gbbrs, which is like ~$550

like if this all still holds true upon release then we have been scammed by ghk for years

by we too

[stark ice]

i didnt hear a lot of bad stuff about the ghk

[low umbra]

also insane gas efficiency

really

pre 2019 ghks are good, but hard to find and very desired

anything after has various qc issues, often unfixable

that's why they came out with their v3 to fix these issues hopefully

[stark ice]

if there is a ghk ak here for sale it goes for insane price

[low umbra]

yea..

for every gbb ak you need to do your own upgrades before it's usable

except tokyo marui those are perfect out of the box

[stark ice]

ye but aren't u limited to green gas?

[low umbra]

yea anything higher is not recommended for any japanese replicas but you can use higher

[stark ice]

i only use green gas in my tm mp7

[low umbra]

not like you need any more than blue and green gas unless you live in sub zero climate

i've been using nothing but red gas in my tm mws and akx lol

even in summer

but for actual games i have to switch to blue/green because of fps limits

[stark ice]

its cold here really often

especially in winter

[low umbra]

freezing?

blue for summer, green for winter but very cold you might have to use red gas

[stark ice]

depends

[low umbra]

but if it gets too cold only co2 will work

[stark ice]

green works in the summer for me

[low umbra]

yea ofcourse

but the only reason to use higher psi is for cold

[stark ice]

also u cant buy blue gas here

[stark ice]

ye

[low umbra]

green is like standard anyway

i use blue for summer because again fps limit

[stark ice]

we dont have fps limits, just joule limit.

max joule u can have here is 4 but most common is between 0.9-1.9

we also got rules from what distance ur allowed to shoot with specific ammount of jouels

[low umbra]

damn 4

[violet patio]

Yo guys, im owning an gbbr for the first time and not gonna shoot it for a while since winter came. Should i empty the CO2 cartridge in it for winter storage?

[low umbra]

yea better to empty it but it doesn't rly mater

be sure to lube it up once u wanna use it again

[stark ice]

co2 in winter could work tho

[violet patio]

it works but its pretty much nerfed

[honest meadow]

yea i am getting one on saturday but mainly bc it is only £125 comes with 4 mags and a bolt with a npas installed and the cqb bolt

[rapid wolf]

125 for an mp7 gbbr with 4 mags is a steal

[river bison]

HPA tap it

I have 7 MP7 GBB mags and 2 drums lol

All HPA tap cuz fuck winter

[stark ice]

no

never gonna use hpa

[river bison]

Good luck winterizing

[stark ice]

im not gonna use it in winter

[river bison]

I hate the lack of aftermarket parts for the VFC MP7

Thats why I stuck with the KWA at least I managed to replace all the stock internals and winterized it

[honest meadow]

im getting a kwa mp7 on saturday like i said before how easy was it and where did you find parts for it?

justt cause i have had some ppl say its hard to find parts

[river bison]

Evike, JkArmy

They are easy because some of the parts are also used on the KWA Mp9

Also RA tech made some parts like the NPAS

[honest meadow]

yea the one im getting already has a npas installed on the regular bolt along with a cqb bolt

[river bison]

I used the CQB bolt because it wears out the gun less

Also safer fps/joules

The stock bolt makes it shoot too hot

[honest meadow]

the npas just adjusts the volume of gas that pushes the bb right?

[river bison]

Yeah

[honest meadow]

do you have to take the bolt out to adjust it or can you do it from the ejection port?

[river bison]

Gotta take the bolt out

[night kettle]

https://cdn.discordapp.com/attachments/1142226567972528148/1182161756219518986/IMG_3436.mov?ex=6583b0ee&is=65713bee&hm=2ff4e4aa11a0677c72d08a3b7d4e92e43e783538e93eb08e3d708a6f7da1cebc& friend got a jack

[low umbra]

lmfao

[rugged salmon]

lol 5.56 magpul on a 5.45 let’s go

[low umbra]

looks good

[smoky thunder]

Might be onto something with this one

[rugged salmon]

Ye lol extremely tight fit (had to disassemble it)

But eventually when I kit out my 105 and turn it into a cursed dmr imma prob do od green highlights with it (like green magpul and other stuff)

[rugged salmon]

How hard is it to tap gbbrs?

[warped vector]

Felt like posting about my first airsoft gun here

TM hicapa and completely stock! If anyone has tips on how to basically not beat the crap out of one please do tell i need every bit of info as a newbie

[crystal rover]

Don’t drop it

And run into things gun first

Don’t slam it against people like you would in gta

[rugged salmon]

Turn it into a dmr :))

[warped vector]

The two types of people

[ionic temple]

got myself some gear

[low umbra]

epic

what's that patch from

[gilded marten]

Google can’t even find it

[low umbra]

lmfao

[ionic temple]

paratrooper brigade

[low umbra]

thanks

[ionic temple]

np

[signal heath]

they can take a shit ton of abuse and rounds and still work excelently. Lubricate slide and trigger etc with silicone lube after every game.

[warped vector]

Gonna take a note of that, thanks much!! Any specifics or would just any oil do?

[signal heath]

silicone

must be silicone

petrolium based lubes will warp/harm the plastic

[rugged salmon]

would a little grease work as well?

[signal heath]

eh depends how thick, a proper grease is too viscous and gumms everything up

[rugged salmon]

ok got it thanks!

[signal heath]

for a hi capa you want a thin runny lube

i just buy treadmill oil on amazon or use superlube silicone grease

its light enough to use on pistols or really anything

i tech with superlube on all my aeg's

[drowsy quartz]

u planning on modding it out

theres a lot of after market stuff for hicapas

[warped vector]

Probably not now since i just got it

Any tips on what to get first?

[honest meadow]

New mp7

[low umbra]

this make me want an mp7

[river bison]

Worth

[frozen raven]

Super lube synthetic oils is great as well I use it on my GBBs it last a real long time

Plus they got have this lil man on them

Lil super lube guy

[thorn axle]

i feel bad for ur vacuum...

[drowsy quartz]

kinda depends what your looking for, cuz the fps is pretty low on the TM Hicapas oob

I put a better barrel bucking and hopup in mine as my first upgrades

but a new slide could also look sick ash

[stark ice]

The "Cursed-47"
Looks horrible on the outside (Looks alr from a distance), parts from few different ak's, had a lot of issues with it for few months. Replaced all internals with good ones.
Bought for 30$ and spent over 300$ on upgrades and parts.
https://cdn.discordapp.com/attachments/432933357744029706/1183184272312500338/20231210_001054.jpg?ex=65876939&is=6574f439&hm=8506b7bc617589f5a055e30cb1aacbc802fd45d458857392ca6bc7b7dd4a631a&

[stark ice]

mp7 gang 😎
https://cdn.discordapp.com/attachments/746452795036532760/1183191711036485652/20231207_100003.jpg?ex=65877026&is=6574fb26&hm=0617c2074a62b0ef77d2f0aa1fb1a793bf8111d6c146200b010a7694cca79a51&

need to fix my mags tho, 3 are leaking and 1 leaks one day and other day it works.

[signal heath]

i argue nothing is needed

bucking maybe, but i could hit ppl at 200 feet with mine

most accurate airsoft gun ive ever owned

the fps is bad but its irrelevant

[drowsy quartz]

fair point Im just saying what i did in mine

[signal heath]

ye would not reccomend slide tho

needs a new hammer spring, new hammer, and a bunch of other upgrades to account for extra weight when cycling the gun

wear and tear increases too

[drowsy quartz]

mine cycles perfectly fine using a metal slide

[signal heath]

you live in cold climate?

[drowsy quartz]

the bbu is stock in mine

[signal heath]

what gas u using

[drowsy quartz]

green gas and i dont really play in the winter

[signal heath]

there's the answer

[drowsy quartz]

but if the guy is indoors thats irrelevant anyway

[signal heath]

fair enough

i just would stick with stock. put well over 400k rounds in mine with no issue

[drowsy quartz]

hell yeah

ive heard of people having issues pretty fast using the TMs but those are always rare

[vale sentinel]

Should i get an A&K PKM-W or a arcturus PP19 with a mosfet and zenitco parts?

[low umbra]

pp19

[rugged salmon]

pkm drippy tho

hottest lmg

[low umbra]

i like pkp more

[rugged salmon]

ye but there arent rly any airsoft pkp

also that wood on the pkm is peak drip

[vale sentinel]

Pkm looks better than the pkp tbh

[smoky thunder]

Fair compromise: PKM with zenitco parts

[low umbra]

which?

[low umbra]

yes

[vale sentinel]

i ment pkp

[real hill]

are there any mods i should make to my Umarex S&W M&P9C i have coming in

[frozen raven]

Used my EMG (cyma) m16a2 today worked great but a hop up upgrade is in order it’s just inconsistent

[real hill]

how is i tinconsistent

like accuracy wise or

[frozen raven]

Like accuracy wise yah

[inner cedar]

My new baby is awesome. Weighs just over 9 pounds, almost 10.

[frozen raven]

hop just is meh it works most the time but it changes up

[frozen raven]

That’s sick

[inner cedar]

The mags work fine since I got the expensive bbs

never use .12 gram bbs

[real hill]

wrd

[inner cedar]

I got some .25 gram bbs and never had a malfunction since

The sound it makes when you charge it is intense.

all that metal sounds great

[real hill]

i use .25 aswell;

[frozen raven]

I use .25s they are about the lowest I’ll go in weight

The fit from today I also used my doodoo rusfor kit as well but didn’t get a pic

[real hill]

im converting a video to mp3 rq

imma send a vid of my airsoft gun

i love the decocking sound

i gotta clean my bed damn

but yea i dont got an optic for it

and im buying a M&P9C Tmrw which ill post here when i get it

[night kettle]

anyone got better camera suggestions, i’m currently settled on buying a gopro session but i’m open to better ideas

[real hill]

whats it gonna be mounted on?

[night kettle]

brain exploder mount on a DYE i4

[real hill]

i mean a go pro like what u think ur gon do is a good idea

go pros are nice

[night kettle]

just didnt know if there was cheaper ones

was thinking about a ROAM2

[real hill]

i love thoose

arent they hard to find

[night kettle]

hella on ebay rn

but they break pretty easily and I doubt for the price ppl have them listed for they work

[real hill]

cause if i remember contour dosent make them

[night kettle]

💔

[real hill]

idk i went on theyre website and they sell literally nothing last time i looked

[night kettle]

yeah

im getting a session cause theyre a lil lighter than a hero

[real hill]

theyre bit ub vyusbess

[night kettle]

huh

[real hill]

b

i speed type

theyre out of buisness

contour dosent exist anymore

[night kettle]

oh yeha

[smoky thunder]

I heard they’re pretty rugged, but where they lose to gopro is in the overall difference in audio/visual quality (especially in low-light conditions)

[night kettle]

Outside yes I meant the internals like you said arent as amazing (older camera makes sense) but the construction and lense are good

friends roam2

he lives for it

ur right about quality depedning on lighting

[signal heath]

what plate carrier to go with gorka 3, i have 150 usd

[real hill]

whats ur theme

[signal heath]

wagner so anything goes

[real hill]

alr

imma find 1

may i ask what u perfer

slim , bulky etc

[signal heath]

i know jack shit abt plate carriers but im very lean

needed to modify my amazon carrier to account for my skinny ass

[night kettle]

amazon anytihng #1

(i make minimum wage)

[real hill]

a jpc is slim

[night kettle]

😎

[real hill]

and a iotv is bulky

[signal heath]

i see

[real hill]

ur small so

[signal heath]

i hear ppl rave about jpc

why

[real hill]

cause cag

but because ur goin wagner

smthb like this

cause its like sorta knock off and russia so

[night kettle]

whats ur budget

[signal heath]

based price

[signal heath]

bruh 150 if even

condor is up my alley actually, may just yoink

[real hill]

theese are on the lower side

[real hill]

i got 1 too

imma get it rq

[signal heath]

this is wat i have atm

yea may just buy a condor rig

thanks for the suggestion, crye is out of budget lol

[real hill]

u can always do a knock off

[signal heath]

ye aliexpress

[real hill]

this is my kit minus the belt and uniform

i went for an all black look to cosplay

MY FAST BUNGIE CORDS]

bruhhh'

i alos have a bag

and a hat with coyote comtacs

also @signal heath buy dummy plates if it dosent come with any

mb for ping

also whats ur primary

i gotta do a zaslon kit

or i might do my own like umbra group style kit

imma try to do zaslon tho

[tepid furnace]

im working on a ghost cosplay for airsoft, what do yall think

[real hill]

me prsnly i dont like ghost

but thats a good mask

[tepid furnace]

thank you! i took 3 days 😭

[real hill]

you made it?

[tepid furnace]

yea

i downloaded a 3d file but customized it

[real hill]

3d print?

why is Evike so DAMN Slow

also

i need something similar to a TOR helmet

you think this would work

[tight egret]

https://www.ebay.com/itm/334057666180

[real hill]

thx

do u gotta link for a the cover

[real hill]

this

[tight egret]

https://www.ebay.com/itm/265190186915?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D257839%26meid%3D9c3118c5cc774979b1bbb2921448b536%26pid%3D101875%26rk%3D3%26rkt%3D4%26sd%3D334057666180%26itm%3D265190186915%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V2V4ItemNrtInQueryAndCassiniVisualRankerAndBertRecallWithVMEV3CPCAutoWithCassiniEmbRecall%26brand%3DBrand&_trksid=p4429486.c101875.m1851&amdata=cksum%3A2651901869159c3118c5cc774979b1bbb2921448b536|enc%3AAQAIAAABcHD%252FO%252BVoFoPPIoZ2g0kOZxWd85mWuIHekSp3qag7zFfwObZeQoitzE%252FDCfcejfO%252BzOLmzZmy11RrgWpA56KM9DpasK%252BGtGYwCFvgaK6ijP5AqShEUhT8f2oX6hvndJ3G0oWH8DD1DlBWseQltpxcSDW2Uu52NrseaxeINpsrDP6vx7ny%252BkPKauMa3yeSanWiimkYnd6mg0JARleWoT94E81gMxO7ywkeYHkhXUfwZhLkk58DKRCxGUF5XWFbSjWgjsqWOJ3H%252BDLvEkCmKdpSjSYVx%252Fu8RAqm7ffLUyeBoYFYFskl9KXAJQ%252FBs518DJRgP5%252F%252Bsb89BJtAEC%252BRqBAUX%252FS25wRPM5gBw2Kwxs9yFW8jDxisJIJEb%252FHzHnWpeq4bX89p2z%252B1Z9YxBWjQo64rj7iE2vnITy%252BjQ4vvDGxg%252FQkxDL7XtF1dw9lZ5ab7PZ6JrfXJL9woOR%252BnAKjxHAUz9IXWGxrbxXbAygoIPX7%252FJ32e|ampid%3APL_CLK|clp%3A4429486

[real hill]

imma have to look for one

cause i gotta do black

im gonna do a custom SOF unit

[real hill]

i hate evike smtimes

its so slow

[signal heath]

poopooo ak

[real hill]

damn

[real hill]

like my kit

?

[signal heath]

💪🏿

is nice

[real hill]

stock or

any mods to it

[real hill]

the angled grip

hurts me

whered the stock go

bro evike is gonna kill me

its so slow

and my PC is fine

so idk

[signal heath]

angled grip is nice

can be placed close to mag and not bash into it when reloading

comfy too

[real hill]

i perfer a anglled like magpul or stubby

i hatted magpul angled but

i like em now

imma make an insurgence kit

imma go real insurgence and pick low to mid priced stuff

[rapid wolf]

where did u find that grip

[signal heath]

aliexpress 45 deg red dot mount

magpul rvg clone

25 bucks all done

[rapid wolf]

would one on amazon work too

just any 45deg red dot mount

[signal heath]

i paid 1.45$ on aliexpress for mine

[rapid wolf]

i’m not worried abt price

[signal heath]

sure idk anything would work

[rapid wolf]

cool

[real hill]

just dont buy the otpic on amazon

[hybrid estuary]

Thats ingenious

[rugged salmon]

Idk if it would fit the theme but the phantom gear wraith t3 is a very good budget rig (is drippy) and it’s pretty comfortable

https://www.evike.com/products/30923/

Pretty good for 80

I’ve had it for around 9-10 months now and so far no problems

[low umbra]

mags on side is crazy

[honest meadow]

?

not that crazy

[low umbra]

rather have it on sides of my belt

if on sides at all

[honest meadow]

yea but i stil have 1 mag on the front of my cumberbund aswell as the 4 on my Plate carrier and 3 on my warbelt

[low umbra]

front of the cumberbund is the nearest i'll go

anything past that is just uncomfortable both to just wear and to actually reload from

[honest meadow]

i mean yea i never reload from anywhere but my fast mag pouches on my belt

i just move my mags down to those pouches when i reload from them

[stark ice]

anyone knows if this could be good for the price? idk much about cyma. i also heard that their mosfets break fast https://www.taiwangun.com/assault-rifle-aeg/cm-650b-mosfet-edition-black-cyma-3

[low umbra]

sick gear setup

what camo is that

[honest meadow]

AOR-1

[wheat isle]

flannel shirt supremacy

[crystal rover]

General rule of thumb is that cyma is good, that’s one of their low end mosfets so just don’t use a battery higher than 9.4v

[stark ice]

i only use 7.4v lipo

i might replace mosfet one day tho

[crystal rover]

In that one you will

Some day

Or there is 2 other routes you could go

1. Cyma platinum
2. Get the no mosfet one and buy a t238 mosfet

[rugged salmon]

yeah its just an option there for the ppl that need it

[stark ice]

taiwangun only got mosfet edition

[rugged salmon]

yeah the mosfets do break fast and the hopup on mk47-sr47s need a little bit of modification but other than that theyre half deacent pretty good for the price tbh

[stark ice]

this is a different mk47 tho

not same as urs

[rugged salmon]

yeah ik but most of the internals are the same

[stark ice]

a

[rugged salmon]

not sure about the mosfet but other than that the rest should be the same if not similar

[stark ice]

idc if mosfet goes bad tho, it just needs to last a month or 2

[rugged salmon]

ye mine lasted me like 2-3 field days before it crapped the bed

[stark ice]

im gonna get the double eagle ek47, heard only good things about it.

[stark ice]

i can just send it for repair, it comes with 12 month warranty.

[rugged salmon]

oh w

[honest meadow]

if you are willing to pay for shipping back to taiwan gun and willing to wait for the weeks it takes

[stark ice]

it doesnt take weeks for me and idc about the shipping price.

o read it wrong

[honest meadow]

meh just me personally i wouldnt want to wait ages and pay for shipping that'll be the same price as just buying a better mosfet and getting it installed

[stark ice]

ye im willing to do that, i do have a backup aeg that works really good.

[stark ice]

i might buy titan mosfet

[rugged salmon]

yeah looking at the de ek47 it looks pretty god has rotary hopup so shouldnt rly run into any troubles with that unless youre using high caps

[rugged salmon]

asters are also good for cheaper

[stark ice]

only midcaps

[honest meadow]

i mean still will have the s-hop

[rugged salmon]

yeah the s shaped hop unit has trouble with feeding high caps so thats good

[stark ice]

he's talking about the different rifle

[rugged salmon]

yeah its fine with mid caps

the usual problem for sr-47 hopups is staying adjusted

[stark ice]

hop in the ek47 is a normal rotary hopup thats modified a bit

[rugged salmon]

yeah its still an s shape tho

just diff in feeding methods

[stark ice]

ye but its not horrible.

[rugged salmon]

than normal hops

[rugged salmon]

ye ik

[stark ice]

im gonna buy the sr47 1st and after a month or 2 i will get the ek47

[honest meadow]

why

[stark ice]

why not

[rugged salmon]

idk i would just save the money and use it for upgrades to the ek

[stark ice]

also my friend is gonna probably borrow my aeg a lot

[rugged salmon]

eh fair enough then

[stark ice]

ek doesn't need upgrades

[honest meadow]

yea just save and modify or get attachments or gear

[rugged salmon]

nah you can always upgrade a gun lol

[stark ice]

ye but i dont need to upgrade it if it works like i want it to work

[rugged salmon]

ye ig then

also sr-47s and generally cyma style mk-47s are project guns so youre gonna end up spending a bit more on it

[stark ice]

probably won't spend anything on it for a while

[honest meadow]

yea not the most reliable

[stark ice]

but ye i might upgrade all internals in the sr one day

[honest meadow]

what happened to the muzzlebrake

[harsh spire]

It’s there just was poorly installed by the previous owner

The ports are facing the wall in the photo

[honest meadow]

oh ahha thought the ports had just been chopped off for some reason and it was just a metal cylinder

[harsh spire]

Ya it’s unfortunate but the guns performance outshines any imperfections on the externals

Aside from my VFC 416 with the Avalon this gun has the best stock internals I’ve ever seen

[honest meadow]

surely you can just take it off and rotate it so the ports are horizontal like they should be

[honest meadow]

the acturus ak-12k isnt it?

[harsh spire]

Indeed

The mosfet version

[honest meadow]

yea arcturus are very very good for the money

[harsh spire]

Not the PE version so it doesn’t have 2 round

[honest meadow]

meh but would you ever use it no probably not

[harsh spire]

Definitely I’m having a hard time not running it it’s so much fun

[honest meadow]

yea i really like the ak-12 k look

sbr's are my soft spot tho tbf

[harsh spire]

Also just got my LCT drum fitted so I can use it with the Arcturus

That was a pain in the ass to make a long story short it involved a hack saw

[honest meadow]

yea they really dont like some brand of mags

[harsh spire]

Ya it hates my cyma mags to

[honest meadow]

my E&L this one has to have every mag filed unless its a E&L mag

[harsh spire]

It only seems to like Arcturus OEM mags and the LCT drum that I modded

[honest meadow]

yea both arcturus and E&L are under MOS Manufacture so i think its just a thing MOS have making their replicas picky on the mags

[harsh spire]

I don’t mind to much I have plenty of Arcturus mags

6 mid caps plus a hi cap I deactivated for display purposes

3 AK-12 and 3 74

[honest meadow]

yea i'm waiting on deciding a chest rig cause i have a sso pantsir, defender 2 emerald and a LBE setups but just want a chest rig i can swap between my ak and mp7

[harsh spire]

The ferro chest rig wide can except placards

[honest meadow]

yea but idk ferro and those american brands are kinda expensive in the UK

plus i dont really like those "hype beast influencer" typa brands

[harsh spire]

That’s fair

I’ve had ferro stuff before and I’m not a fan either

It’s just one of the few chest rigs I can think of that excepts placards

[river bison]

I have an FCPCV5 and a Slickster

Slickster is for conceal over the coat

I liked my FCPC

Used it for work

Moved back to crye because unit uses crye

JPC/AVS shit

I run the AVS rig for work these days

[harsh spire]

I had a slickster and it gave me nothing but trouble it started fraying after only a few Airsoft games

Sold it and got most of my money back tho

[river bison]

That’s weird lol my buddy used a Slickster and it’s been holding up

Been using it for a year and a half heavily too

For airshit and work

[harsh spire]

I’ve been through a few carries but my favorites have been the LBT 6094 and the AVS

[smoky thunder]

Man, I’m having a hard time deciding on a new rig too. I’ve narrowed it down to 3 but 1’s out of stock and the other 2 cost more

TT mk2 vs Helikon guardian vs UR Tactical enhanced combat chest rig

Decisions, decisions…

[honest meadow]

yea i'm looking at something modular tho tbf cause i want to be able to switch between smg inserts and then rifle inserts

[crystal rover]

Aglite pc on top

I plan on buying one when I got to a milsim eventually

[smoky thunder]

Only things I could think of (outside of building off a surplus TAPS or something) are the D3CRM and Mayflower Gen VI but I’m not sure what those would run for in europe

I’m sure Helikon makes something that works for that too tho

Maybe their TMR

[honest meadow]

tbh i think ima go for a chicom or a RECCE rig for the ak and trhen just a cheap knockoff Haley style rig for the mp7

[wintry silo]

The zog got to this one

[crystal rover]

Or just consider I know people who had them before the war

[vale sentinel]

Anybody know where i can get external PKM parts in Europe, (not real zenico, no money for that :(. )and especially the dummy round belt?

[wintry silo]

The zog is coming inside them

[muted bloom]

https://youtu.be/quREXSMPSHI?si=rUuj5sQh9uM6Y02m
PSA: Agilite K19 is not good

also they are made in vietnam from chinese materials

so honestly, you could get the same thing straight from china if you want that inconvenient plate carrier

[muted bloom]

can you close the pouches?

[muted bloom]

it's nice and all, AK drums are a vibe but im not particularly fond of that foregrip

how's the mosfet?

[harsh spire]

Yes

[muted bloom]

and inconvenient as in: a ton of weird design choices, the zipper admin pocket thing being horrible, plate carrier generally being uncomfortable to wear after like 15 minutes

[harsh spire]

The fore grip just feels good I wouldn’t put it on a AR though

[muted bloom]

the added "comfort" is nice for like the first 5 minutes

[crystal rover]

Yeah you can stfu, that’s a half assed review and I would rather trust the guys I know in person who use it as their main plate carrier and also the countless reviews from people who have actually used it in a conflict

[muted bloom]

what the hell dude

how?

[wintry silo]

It’s also Jew gear

[muted bloom]

go ahead then

remember that i told you

[wintry silo]

The zog came inside him

[muted bloom]

you should honestly just get crye with that money

[harsh spire]

Newer Alice mag pouches can fit 2 AK mags but the older ones can only fit one AK 12 mag

[muted bloom]

but it's your money, i can't control you

[muted bloom]

oh i see

i bought them like fourth hand so i have no idea how old they are

they dont fit 7.62 ak mags

is that like an alice belt or some weird chest rig

[harsh spire]

I don’t remember if the newer ones fit 762 mags they might but I don’t really know how they fit my G3 mags

[muted bloom]

looks dope

[harsh spire]

Yep it’s a custom-made Alice chest rig

If you have an Alice belt set up you can make it

[muted bloom]

can you send links or something

i have an alice belt

[harsh spire]

To my knowledge, no one else has done this

It’s an original idea

At least the way I did it

There was no custom work involved it’s comprised completely of stock Alice rig parts no sewing or anything

[muted bloom]

please, share your knowledge

im interested

[harsh spire]

I’ll DM you pics of the back of the chest rig that’s about as much as one would need to know on making it

Also, I don’t think it’s a requirement but you probably are gonna need the 1956 production straps

But if you set it up a certain way you should be good

[muted bloom]

all that availability is kinda rare here

i got my alice stuff out of sheer luck

[harsh spire]

UK?

[muted bloom]

im in finland after all

[harsh spire]

Ah

[subtle leaf]

wow thats horrible, they're only equivalent in quality to all of your airsoft guns lol

na but fr I've never seen quality issues on agilite

[crystal rover]

That’s because they don’t happen and it’s rare af

[subtle leaf]

and on top of that

[crystal rover]

My friend has been running his for 2 years and has had no issues

[subtle leaf]

knowing agilite, i bet if you told them they would profusely apologize and send you 2 more

[muted bloom]

why not just go with crye

[crystal rover]

Over priced Amazon pc? No thank you

[subtle leaf]

"why not just spend an extra 400 dollars for a sub par product"

[muted bloom]

you are trolling lmao

[crystal rover]

And you’re a Jew hater what’s your point?

[subtle leaf]

crye is overhyped

crye is literally hypebeast garbage

[wintry silo]

Cuz no one uses agilite

[muted bloom]

when did i say that

[wintry silo]

That’s ferro

[subtle leaf]

personally the 2 best plate carriers I've ever used were also among the cheapest

[muted bloom]

i just think agilite is a shitty company

[subtle leaf]

TREX arms AC-1 (uno), and 5.11 Tactec

[muted bloom]

i don't even use a plate carrier

[wintry silo]

Def trolling

[subtle leaf]

not trolling

[muted bloom]

yeah probably

i think it's bait

[subtle leaf]

Ill buy 4 or 5 tactecs before i buy a JPC

[wintry silo]

Skill issue

[muted bloom]

i'll buy a TMC knockoff JPC before i would buy a real one

[subtle leaf]

idk what TMC is but tbh I would also buy one off amazon before i get crye brand

[muted bloom]

TMC is like the best airsoft gear brand

[subtle leaf]

gear gets used and damaged (unless it doesnt if you know what I mean)

[wintry silo]

The zog could never relate to this

[subtle leaf]

im not special forces with a special forces budget

[muted bloom]

why laser cut

[subtle leaf]

looks cool, is there a reason not to?

[wintry silo]

Cuz I can afford it unlike you, poor

[muted bloom]

nah i just see laser cut as kinda pointless

it's an example of over-engineering kinda

[subtle leaf]

lol what

[wintry silo]

What is bro yapping abt

[subtle leaf]

laser cutting is cheaper to do than stitch traditional molle

[subtle leaf]

literally this

[muted bloom]

not as durable, and if you break it, it is a pain to repair

[subtle leaf]

also for the record, i dont use a plate carrier either (for airsoft)

[muted bloom]

the weight savings ultimately are not worth it imo

[wintry silo]

Easy get Gud and stop being fat

[subtle leaf]

i use smersh, the best chest rig ever designed

with fort defender 2 under it, and altyn lol

[muted bloom]

im not lmao

i go to gym nearly daily

[subtle leaf]

🧢