airsoft

[slate leaf]

SR25 Setup

[slate leaf]

W

[old latch]

Not worth, save yourself the trouble

If you use too much, it will coat your gearbox and get into places you don't want it to be, like the cylinder. You don't really need a lot of grease, a light coat on contact areas will do

[queen portal]

hawt

[elder anchor]

[honest meadow]

this is the airsoft chat not real steel

[sonic plover]

Don’t buy one as an upgrade

Get a Perun V2 hybrid

[elder anchor]

or just a titan.

[river bison]

Lol are you seriously showing off your poverty gatsticks in the airsoft channel?

[wheat isle]

yep its almost like the real thing

[limber flame]

that really doesn't look bad

nice

[rugged salmon]

Yeah I got it because my cyma mosfet broke and it’s all my local shop had that was affordable. Do you think it will get the job done?

[sonic plover]

It’ll be fine, but it’s not the best thing you coulda got.

Lose out on a lot of features over a Perun

[slate leaf]

Where’s the LPVO from

[limber flame]

vortex

[slate leaf]

500 dollars

At least it’s cheaper than a vudu

[limber flame]

welcome to the world of legitimate optics

theyre expensive

(you pay for what you get)

[slate leaf]

I know they are

[limber flame]

((90% of the time))

[river bison]

He was posting rl firearms lol

[slate leaf]

Ik

[river bison]

Also bro @limber flame that shit is a strike eagle that shit is cheap

[limber flame]

i couldnt tell which one it was

[limber flame]

still expensive for a lot of airsofters

more than most of their guns

[river bison]

I always hated strike eagles because compared to a Sig LPVO the glass and eye relief is worse for the price

[slate leaf]

I’ll just get a 300$ monstrum LPVO

[limber flame]

shame sig optics are only really available en masse and for cheap inside if the US

[river bison]

I use this 1-8 Sig LPVO and it barely cost me 500

[limber flame]

i wouldnt go with monstrum
theyre pretty shit

poor glass
bad eye relief

[river bison]

For airsofters the vector optics 1-6 is great

[limber flame]

fat chance it wont hold zero if knocked

[river bison]

I have like 6 of em for airsoft

They also hold zero believably enough

tried it on a 7.62x51 platform

[limber flame]

apparently the holy warrior vortex 1-6 is good

the fuckin uhh

cant remember the name

[limber flame]

the razor copy

[river bison]

The one on the tan 416

Is a vector 1-6

[limber flame]

how much that run ya

[river bison]

VICTOPTICS S6 1-6X24 30mm Monotube SFP 5 Levels Red & Green Illumination LPVO Edge-to-Edge Image Rifle Scope with Zero Reset & Turret Lock for Hunting Shooting Compact Airsoft Rifle Scope https://a.co/d/fTm9TrY

It’s only 120 bucks

But it holds up very well

Someone has a review on it where he had it on an AK

[sonic plover]

M18 runs this

[limber flame]

whomst?

[sonic plover]

Oh, you’re simple, I forgot

M1984

[limber flame]

ah yeah

[limber flame]

just a little inept

havent spent enough time in AI

i only use the gear chat tbh

[honest meadow]

u not mask of the sling loop on the stock haha?

[elder anchor]

L server

[elder anchor]

Good optic

[tribal tree]

@river bison yeah

[river bison]

Lol

[honest meadow]

nah why u alr got a bite outta the cheese

[wheat isle]

sshhh

[rugged salmon]

lol as long as it shoots better than stock im fine with it

[sonic plover]

Perun would shoot way better then an aster

You get precocking and a bunch of firing mode adjustments

Like binary trigger

[rugged salmon]

ye

[sonic plover]

But it’s fine anyway

Aster will be fine

[rugged salmon]

bro installing these are so hard without a dremmel lol

[sonic plover]

That’s because CYMA platinum gearboxes are ass

Anyway, make sure you buy a gate usb link

[rugged salmon]

fr

[sonic plover]

Lets you programme the aster

CYMA platinums are just ass guns

[rugged salmon]

only problem rn is trying to get the board hole to fit on a screw hole

[sonic plover]

Piston head will eventually kill itself and motor is ass

[rugged salmon]

ye im planning to upgrade all of those in the future anyway

just love the mk47 style

[candid mountain]

almost complete mock up of my favorite ak-74 to use in game just missing the pbs-4 suppressor

[river bison]

@elder anchor @limber flame I upgraded the M27/M38 DMR

[limber flame]

GYAT

only good HK rifle

(its still bad but looks cool)

[river bison]

I put the longboi SMR rail on it

[limber flame]

the SMR is so snazzy

[river bison]

Since it’s a DMR

[limber flame]

i love it

only good rail system for em

[river bison]

Here’s my A5

Lmao

It’s perfect since I got my AOR1 stuff for my seal build

Mmm fuck it I’m putting the MAWL-C1 on it

[drifting remnant]

mlok is the only rail system people should use

[river bison]

Funny enough SMR is Picatinny/MOE

The screw holes is for the rails or you can use MOE on the slots itself

[rugged salmon]

Hey anyone have any idea where this piece goes

On this

Been looking and I can’t remember where it fell off from

💀

[little saddle]

this looks fucking sick bro

[rugged salmon]

@river bison pls help :,))

[crystal rover]

goes behind you gears

its what pushes the selector plate

[rugged salmon]

ah that makes sense

it was only shooting full auto

do you have a video or anything to show me where to put it?

[crystal rover]

take you gears out

[rugged salmon]

alr one sec

[rugged salmon]

is it supposed to be where that black thing is?

[crystal rover]

no

trying ot find an image

[rugged salmon]

oh

[crystal rover]

it should sit behind the gear that makes contact with the piston

@rugged salmon

[rugged salmon]

ight tysm

[crystal rover]

also

i would def get a new tappet plate and nozzle

[rugged salmon]

howcome?

[crystal rover]

ok i can list afew problems that i see with that gb

1. clear plastic isnt that good
2. plastic teeth on your piston
3. questionable gears

how i would fix
get a shs tappet plate, nozzle and metal tooth piston
and rocket 16:1 gears

other issues would be the compression, so cylinder, cylinder hear, and piston head. but thats not a big issue

[rugged salmon]

ye i wanna upgrage all of those eventually but prob not till these ones break

[crystal rover]

the piston will break

but the nozzle and tappet wont, i just recommend going to a better pair cause clear plastic is shit

[rugged salmon]

ye lol i mean for the current internals its shoots pretty well

around 320-340 with .3

[crystal rover]

yeah. new gears would increase speed, and the rest would jsut make you fps more consistent

[rugged salmon]

alr thanks ill prob look into it

[crystal rover]

👍

[rugged salmon]

Here rq where would I put it here bc I can’t seem to find a fit

[crystal rover]

yeah that mosfet looks to cover it up

so honesy

not sure

[rugged salmon]

I mean there weren’t any holes being covered up by the mosfet

[crystal rover]

oh

uhh

hmmm

look up a video on the gate aster install

and see what they do

[rugged salmon]

i have but ig ill try again

[rugged salmon]

ok i think i figured it out

so you dont need that part with the aster

i think i scratched up the part it scans for the selector

so it might just not bepicking up the selector plate

[crystal rover]

oof

[rugged salmon]

easy fix tho

cam with sticker that i can just place on it

[rugged salmon]

@crystal rover you prob dont care too much but i fixed it !!!!!!!

[crystal rover]

nice

i am over here yelling at my gun mentally

[rugged salmon]

lol

also it was the sticker

that fixed it :)))

[rugged salmon]

you can get binary on this one

[honest meadow]

what even is the suppressor u have on

[hidden cape]

tm mws

[low umbra]

fire

[elder anchor]

Ngl the usec kits are usually anorexic 14 year old but bro you have some drip and you’re stacked out your mind Jesus

[honest meadow]

be BEAR or be square

[chrome osprey]

Dude do you have your profile picture in bigger size? I wanna do a patch with it lmao

[rugged salmon]

Good :D?

[elder anchor]

No

Binary

Bad

[rugged salmon]

Lol

The trigger pull is very nice

[copper beacon]

@river bison im at benning

Been here for like a week

Reception sucks ass

[river bison]

Lol

Jesus fuck

[copper beacon]

I ship to basic itself this Friday

[river bison]

Good luck keep me updated @copper beacon

Keep your head down, do the push ups, and graduate

[copper beacon]

Lmao if you want to come see me check the reception dfac

Like tomorrow or later

Idk

[river bison]

I’m on leave lmao

[copper beacon]

Damn

[river bison]

We are all on summer block leave in ranger school

[copper beacon]

You gonna be back in August?

[river bison]

No next week

[copper beacon]

Im hitting the field after grad

Oh

Well ill keep you updated so maybe you can come watch me do pushups lmao

Well got to go, ran out of time

[river bison]

Good luck, fuck 30th AG

Enjoy the dfac

[lost dove]

fake Smersh time

[river bison]

That’s a lot better

[rigid trout]

Which brand is that?

[lost dove]

no clue bc I traded a suppressor for it
It's def fake though lmao

[rigid trout]

Nice lol

[rugged salmon]

Hey anyone know any methods to recompress this spring? If not do you think like Home Depot would have a good enough replacement?

[gloomy maple]

Yoo, it is possible to recompress with heating on a screwdriver but will never be the same. Maybe the replacement would work as expected

[rugged salmon]

Ye going to Home Depot tmrw to try to find a replacement

[rugged salmon]

Also do you think it would look good if I spray painted my charging handle coyote brown?

[gloomy maple]

Yeah why not

[low umbra]

i think then it would look better if more stuff was painted coyote brown

like pistol grip and/or handguard

[velvet pagoda]

It will wear very fast

I mean its airsoft i forgot so if its just to open the hop up idk

[low umbra]

worn looks cool tho

[lost dove]

It simply works
Waiting on my 122 and 117 though

[tribal wren]

Brown stock and handguard/rail panels would go hard

[rugged salmon]

Yeah also the charging handle for the most part doesn’t make too much contact with the sides

[rugged salmon]

Maybe not tan hand guard but kinda like a light bronze

Or a sass hand guard

Very hot

What’s the optic in the middle?

[sour mango]

replica of Trijicon srs

[honest meadow]

yea id say tan pistol grip, panels, stock, and suppressor or smth

[river bison]

I have one too

It’s damn nice

Also hello fellow FDE and URGI Enjoyer

[plucky scaffold]

where you buy your optics and grips from? and laser

[sour mango]

vortex red dots are real steel

other stuff local shops and airsoft forums

[lost dove]

they deadass sold my 6sh122 too somebody else and apologized that they didn't ship me it wtf T-T

[rapid wolf]

lol is that the sping for the charging handle

cuz i did the same thing to mine

[river bison]

Might be better off getting a new one from evike

[rapid wolf]

i hope they have replacement takedown pins too

my rear pin just falls out and doesnt stay in

[rugged salmon]

ye fixed it tho

[rugged salmon]

did you lose the bobby pin?

theres a bobby pin that held it in

nvm forgot the name of it but similar to a bobby pin

Don’t have one on me rn but here’s a rough sketch of what the culprit looks like

[rapid wolf]

there is no bobby pin for the takedown pins

tbh as long as the front pin stays in theres no problem and the gun will stay in 1 piece

[sour mango]

Don't be stupid there is no Bobby pin to hold front or rear body pins. A lot of body pins are locked into receiver and can't fall out unless it's some cheap aeg.

[rugged salmon]

nah it wasnt a bobby pin i just said that bc it was the only name i knew that resembled it

and i was just doing some upgrades on my mk47 and there was somthing similar to what i drew holding in the pin

[rugged salmon]

Homie you even have the gun?

[rugged salmon]

^

[limber flame]

its a retaining pin for a takedown pin

[rugged salmon]

Yeah that’s what it’s called I forgot the name and just called it a Bobby pin bc it looked similar

Thx

[sour mango]

kid my aeg is probably 10 times the price of your pesky aeg

[rugged salmon]

BRO WHO CARES this isnt a gun measuring contest this is me trying to help someone who has the same gun as me

[sour mango]

Google DAS GBLS GDR15, GDR 15 upper receiver assembly and Das GBLS steel bolt carrier group

[rugged salmon]

bro i dont care about your gun

its completely irrelevant

[sour mango]

you're the one who asked if i have one so

[rugged salmon]

a cyma mk47

which you do not

[sour mango]

because I don't like ak hybrids or ak rifles?

Why would I own something I know would just sit in my closet with no use in sight

[rugged salmon]

bro where are you going with this im not insulting you for not having one its completely understandable im just saying dont call me stupid for talking about a gun that i have and have worked on and you dont have and probrably havent even touched

[rugged salmon]

im not saying you should have one im saying you bragging about your gun has nothing to do with this conversation

like bro you have a stroke or somthing?

no one is talking about your gun

[tribal tree]

@river bison I must become him....

[rugged salmon]

that a russain kit?

looks dope

[sour mango]

DAS GBLS GDR 15 with extra upper receiver and bolt carrier group
Tokyo Marui MK18 ngrs fully upgraded
Krytac Kriss Vector fully upgraded
VFC MP7A1 AEG fully upgraded
Classic Army SA58 fully upgraded
Cyma MP5 AEG, DSG build
WE P90 GBBR hpa tapped
TM NGRS Scar-L fully upgraded
TM FNX-45 Fully upgraded
Custom Hi-capa (built from ground up)
Custom built 1911
S&T Tar21 fully upgraded

i have pretty long list of rifles that i own

and yet that list gets bigger every few months

[rugged salmon]

bro shut up stop getting your ego buthurt over some kid trying to help someone els because hes more familiar with a gun than you

[sour mango]

I have touched more Cyma ak's then you seen

[rugged salmon]

ok and!?!?

[sour mango]

I'm not getting my ego hurt, youre just crying

[honest meadow]

why does it matter if your gun is more expensive he was just asking a question and told u that he forgot the name so came up with what he could remember

[rugged salmon]

BRO WHAT AM I CRYING ABOUT

[tribal tree]

Yo that's crazy

But you don't own

Cheese cracka

[rugged salmon]

your the one listing off names of guns you own because you were proven wrong so just get over it and move on with your day

[rugged salmon]

fr i was just trying to help someone and the part did resemble a bobby pin

which a bobby pin could be used to fix it

like dude theres some real man babys in this hobby

[rugged salmon]

also i never even asked him a question

he just hopped in here called me stupid and then got proven wrong

and then got butthurt that he was wrong so he started bragging about a gun that had nothing to do with the conversation

[frozen raven]

that optic is goofy AF

[tribal tree]

Eh

It's semi retro shit

Gives it a vibe

[river bison]

Pictures?

Also since we are flexing

[sour mango]

@river bison

this is my Das gbls with Geissele trademarks laser etched on bolt carrier group and lower receiver

my ngrs atm

[river bison]

My URGI’s are as clone correct as I can get them with the parts on hand.

I do own a real Super duty which is nice

SBR’d version

[sour mango]

can't really own assault rifles in Ireland so gbls is as close as I can get

Wanted 2 different setups for CQB and range so had to buy seperate upper receiver assembly and bolt carrier group to make that happen

[rugged salmon]

hey what brand are those rail covers?

[river bison]

One of the URGI’s is GBB

[river bison]

BCM

[sour mango]

I could not for life of my use a GBBR in Ireland

we only get like a month or 2 of good enough weather

otherwise its gloomy as fuck

and gas doesnt perform that well in colder weather

[river bison]

I’m in love with the URGI design and we started using them for work recently as well

[sour mango]

I'm looking into investing into MK16 urgi handguard, geissele trigger guard and mag catch

for my gbls

[river bison]

First exposure I had with it was when I was overseas, the ergonomics were so good when I got back stateside I dropped 2-3k on a real super duty

[sour mango]

Sadly I cannot get super duty myself so had to make one 😄

luckily my gbls lower receiver was blank

[river bison]

Right now I’m in the process of doing my Noveske N4 build

[sour mango]

but fun fact DAS GBLS accepts a lot of real steel parts so there's that

[river bison]

I’m just waiting for the exterior stuff to come in next week

I was gonna use the EMG APS body

[sour mango]

geissele mk8 handguard here costs close to £400 same with mk16

[river bison]

But the Cyma one came out

[sour mango]

if you do

yeet the gearbox out

[river bison]

I don’t do AEG’s

[sour mango]

APS is as good as vfc gearboxes

which tells a lot

[river bison]

I only HPA and GBB

I like VFC gearbox shells for HPA because it’s very compatible

[sour mango]

i got WE p90 gbbr made into hpa

p90 on 80psi rips

[river bison]

Every other gearbox I had to dremel shit

[sour mango]

maybe vfc's are good in usa

but in UK and eu

[sour mango]

a lot of the gearboxes are warped

[river bison]

Polarstar Jack on this MCX Rattler

[sour mango]

incompatible with some internals etc

i got mcx aswell

I did a little bit of a project and made gel blaster into AEG

with actual sig mcx handguard

[river bison]

I have two

And an MPX

[sour mango]

I have 3d printed mpx

😄

DSG build

55rps

[river bison]

GBB Vector as well

[sour mango]

@river bisonI nearly got Daytona sa58 recently

that was huge missed opportunity for me

[river bison]

Tokyo Marui MP7 with Bullgear HPA engine

[sour mango]

don't you find tm mp7a1 bit smaller then vfc

since as far as I know vfc one is more to spec in size

I held tm mp7a1 and it felt too small for me

[river bison]

I didn’t mind it at all

[sour mango]

I found it fairly small for my hands

[river bison]

I have the KWA GBB one as well that’s fully upgraded

[sour mango]

I haven't seen any new airsoft rifles that I'd like apart from MDR

but it has too many Quality issues

[sour mango]

Bodies are wobbly, gearboxes are badly shimmed

[river bison]

I like how tiny it is

[sour mango]

my vfc mp7a1 is good in size for me and good for range

about 55-65 metres on 0.28s

[sour mango]

I've seen that video

what hop rubber you got

[river bison]

Purple soft nine ball

It’s the bullgear hopup in conjunction with the engine

[sour mango]

have you tried maple leaf ?

with their nub

[river bison]

Hell no not for this build

This shit goes far as shit

[sour mango]

they work really well

I used to use prommy purple but they went down in quality

so started using maple leaf buckings

and they work perfectly

[river bison]

This thing can go up to 100 meters and beyond with .30’s

[sour mango]

well its hpa

what do you expect

[river bison]

HPA has nothing to do with it

It’s the hopup and the bucking

[sour mango]

I wonder

do they test your mp7 with 0.3s?

[river bison]

It’s also a short barrel

[sour mango]

max fps here is 328 fps on 0.2s

[river bison]

It still shoots subjoules

[sour mango]

so even if you use 0.3s you cant go over 1 joule

my gbls sends 0.3s down 65-70m

[river bison]

I should shoot tracers at night so I can demonstrate better how far this shit shoots

[river bison]

We use TCA rules here. 1.5 joules is max for rifles no MED 2.0 for sniper rifles and DMR, 1.00 joules and below you can full auto

[sour mango]

its 1 joule across the board here

which is stupid

[river bison]

Lol that’s so lame

[sour mango]

I outrange any sniper i meet

so none of those fuckers can hit me and i cant retaliate

i got as much range as they do

[river bison]

I can’t get into bolt actions

[sour mango]

neither can I but they are nice to look at

[river bison]

The only one I like design-wise is the ares XM2010 but it has a lot of issues

I just snipe with this 416-style dmr

[sour mango]

funny enough i had L96 cant remember the brand

but it was shooting 760fps + on 0.2s

talk about pain

[river bison]

Lol fuck .20’s

[sour mango]

I know

[river bison]

It’s a good way to not hit anything in distance

[sour mango]

but imagine using it with like 0.4s

[dry hound]

airdrop airdrop!!!!!!!

[elder anchor]

you are honestly too stupid

[rugged salmon]

:,))

[elder anchor]

antanov?

[dry hound]

So true (idk who that is)

Im fucming brainrotting

[elder anchor]

i get massive antanov vibes from you

shame the legened has not returned

[dry hound]

Brain rotting

☝️☝️☝️

[elder anchor]

@supple granite gimme antanov flashback pic please bro

[dry hound]

And the coffee too!!!

[elder anchor]

fuck it we have antanov at home

[dry hound]

Also whats wrong with my cat he want to eat all day

Hes bulking or something

[supple granite]

Your wish is my command.

[elder anchor]

cheers homie

[dry hound]

The horros of modern warfare

[elder anchor]

its you

fr

[dry hound]

So true the chubby me

[elder anchor]

you cant fake it

admit your identity

[dry hound]

I DKNT KNOW WHO IS HE

[elder anchor]

you are him

[supple granite]

I saw an adult film called Call of Duty: Modern Whorefare 69

[elder anchor]

come back to us antanov

[dry hound]

Im not him

[elder anchor]

antanov would find that funny

[dry hound]

Actually gaslighting me i to thinking im him

[supple granite]

Antonov?

[elder anchor]

[supple granite]

Sup bro

[elder anchor]

cant believe hes back

[dry hound]

😭

Hey guys its me Antonov,we are so back!

This is so me rn!

We are so back!

[dry hound]

You gotta tell me more about him so that i can act like im him

[river bison]

Dudes literally part of the lore now

[dry hound]

So true

Hey guys how does my new face shield look¿

[limber flame]

antonov lore😭

[dry hound]

Hey guys new gaming set up please rate

This my new place❤️

https://media.discordapp.net/attachments/937980272270536735/976307844905308250/3240CF5F-F652-4B16-B3A6-ED4D5C830451.gif

[elder anchor]

Best part ab this server if everyone’s honest

[dry hound]

am i doing a great job at being the new antonov

[limber flame]

so true

antonov 2.0

welcome back king

[dry hound]

👍

We are so back!

☝️☝️☝️

[limber flame]

i still find it funny that he gets banned every time he comes back

because iirc hes under 13

[dry hound]

Great for him

Still need more about him

I want to be the second antonov

[elder anchor]

Lol he gets banned? Stg he keeps on leaving

[limber flame]

pretty sure its a bit of both

[dry hound]

Guys check out my new car! The number olate is 69!!!

[limber flame]

[dry hound]

Guys we are so back with my alt account number 69420!!!!!

more info about antonov

🙏🙏🙏

[elder anchor]

nah

[dry hound]

Also going to sleep cause its 11:33

[dry hound]

Im literally him

He's so me

[river bison]

Hmm I should use my evo3 more often

I forgot how ergonomic this little SMG is

Especially with the ATEK furniture

My wife usually uses this when she does decide to play airsoft sometimes

[honest meadow]

id like to get one but then id have to save for the wolverine hpa version cause fuck that battery compartment

[river bison]

I have the Wolverine HPA version

Rather this is the Wolverine version

[honest meadow]

nice only thing i dont like about the foregrip and magwell

i find that angled foregrips on smthing short rlly hurts my wrist after a while

[river bison]

It’s using the ATEK set

I love it personally

Handstops do not work well if you keep your stock collapsed

[honest meadow]

i like the handguard but not the rest of it rlly

[river bison]

I like the mag well because it makes it faster to reload

[honest meadow]

ye

[river bison]

The manual of arms for this thing is something I’m not used to

[elder anchor]

you need to break the MCX out more

[river bison]

So it helps

Which one lol

[elder anchor]

big boi

[river bison]

Lol I do

@elder anchor I just ordered a Cyma Noveske body

Noveske N4 body rather

[elder anchor]

that makes two people i know of building a noveske

[river bison]

https://www.evike.com/products/102357/

[elder anchor]

that the one you got?

[river bison]

I had to have it since I have my SEAL set up

Yeah

It’s getting the HPA treatment

Ofc

[elder anchor]

didnt actually know SEALs were using noveskes now

[river bison]

I’m replacing that stock with the MFT minimalist

They do

It’s weird

[elder anchor]

i knew slade was involved with them heavily but not the teams themselves

[elder anchor]

there are better rifles out there...

[river bison]

So apparently normal teams still use the 416’s but devgru was seen mostly sporting the noveskes

[elder anchor]

very interesting

[elder anchor]

didnt think they were the right kind of rifles for that application

[elder anchor]

ngl tho the builds are tight

[river bison]

Lol it’s funny because in the seal team show they started carrying them too

I love that show just because of the accuracy

https://www.imfdb.org/wiki/SEAL_Team_-_Season_6#Noveske_Hybrid_Rifle

[elder anchor]

they kinda base their kits off whatever instagram trend is going on but they do it right so i dont mind it

its still cool to see

[river bison]

These fucking noveskes are minimalist and just super clean

It makes the 416 look so busy

Also it’s light as shit

I need to get a scalarworks mount now lol

Mmm fuck I have an extra GBRS Hydra mount

Duno what to use it on

Thinking about slapping it on the other MP7

But it has an SRS on it

[elder anchor]

put it on the noveske

[river bison]

Actually

That’s a good idea

As for the optic I was thinking a regular T1 will suffice

[elder anchor]

absolutely

saves you from getting a scalar works

[sour mango]

Just saw this one on a website

wtf

[river bison]

The fuckin mount I got though is the eotech one

I can make it work like the MP7 but it might look goofy

[elder anchor]

just put an eotech on it then

still kosher

[sour mango]

@river bisonyou know Sig MCX spear

Somone is 3d printing it and designing one

[river bison]

We have some in my unit

I’d love an airsoft version

[sour mango]

there is fella in one discord group designing and 3d printing it

[river bison]

We bring them out during ranger school graduations

Man that looks so brittle

[sour mango]

its carbon reinforced polymer

[river bison]

I want a full metal one

[sour mango]

metal would be hard to make

i have 3d printed sig mpx

and its not brittle at all

[river bison]

@elder anchor rip surefire rc2’s I guess Deadair sandmans are THE go to supressors now

[elder anchor]

shame they dont exist

[river bison]

PTS is releasing some

Soon

https://www.ptssyndicate.com/ecatalog-2022-dead-air

@elder anchor

Wanna know what I hate about PTS though? Motherfuckers never rerelease shit

Like I wanted their AAC Supressor for my MP7 and other guns but they don’t make em anymore

Also the MREX buttstock for the SCAR is sold out everywhere

[elder anchor]

they release shit and pretend like it isnt a real product and just a limited release

it pisses me off

and its all soooo expensive anyway

[elder anchor]

saw this

5KU make a sandman K for like £30

if RC2s dont restock in the Uk im prolly gonna nab that

[river bison]

Wtf really

[elder anchor]

https://www.sixmm.com/en-gb/products/5ku-sandman-k-airsoft-dummy-suppressor-silencerblk

[river bison]

Mm

Bruh ofc it’s oos

[elder anchor]

?

[limber flame]

out of stock

[elder anchor]

ah.

[elder anchor]

in stock from taiwan

https://www.wgcshop.com/products/5ku-315-t

[river bison]

Hmmm

[slate leaf]

you can do silly things to these to make them real (in minecraft obviously)

[limber flame]

or you can just buy a HAO supressor

(they actually have baffles and work really well on real guns)

ypu didn't hear that from me

[slate leaf]

in minecraft right?

[limber flame]

ofc ofc

in Minecraft

[slate leaf]

I would be flabbergasted if we were talking about real guns

i couldnt imagine that

[limber flame]

definitely

[slate leaf]

i aint trying to catch a felony

[limber flame]

wooh
felonies are scary

[slate leaf]

i love minecraft firearms!

[limber flame]

totally nothing happening here

[slate leaf]

people who do this in real life with real firearms are bad people

they scare me

[river bison]

HAO doesn’t make dead air sandman supressors

The main reason we are talking about it is it’s the go to suppressors now and trying to make a clone correct Noveske

It’s over taken surefire supressors

[rapid wolf]

oh thats prolly why my pin fell out then

[rugged salmon]

Ye lol if you can’t find the right clip you could prob bend a Bobby pin and make it work

[vocal gate]

@river bison where did you get your scar QD sling mounts?

[lost dove]

117 showed up

[river bison]

I’m trying to source South Korean camo

I’m kicking myself for not picking some up while I was in Korea

[lost dove]

Id also kick you

[river bison]

There’s some legal issues involved with getting your hands on those uniforms like that

I’ll probably just ask some of my KATUSA’s if they hold on to theirs

[lost dove]

Interesting

[smoky thunder]

Anyone know any working evike codes rn? I’m about to buy my first gun, shit’s pricy

[river bison]

Spring2023 still works

@smoky thunder

[smoky thunder]

Sweet, works out

Thanks man

[elder anchor]

Granite B?

Really not a fan

[river bison]

Yes

[smoky thunder]

They have some pretty neat stuff on evike

Think I’m gonna cash out for some nice furniture next paycheck

[elder anchor]

cant imagine condoning airsoft

that would be cringe

[lost dove]

me touching grass (I play too much Tarkov)

[rugged salmon]

what gun are you getting?

[crystal rover]

I am chilling in staging

And a dog walks up and sits underneath me

[smoky thunder]

Cyma standard aks74u

[rugged salmon]

nice

dude i love cyma

[smoky thunder]

Yeah they sound real solid

It was actually pretty hard trying to decide on a specific gun

They got some cool ones

[rugged salmon]

yeah

i got two cymas a mk47 and a 105

mk47 was pretty good but needed some fixes and its mosfet broke after like 15,000 rounds

so far no complaints about the 105

[river bison]

https://www.evike.com/products/102357/ I ordered this but it won’t come until next week

The polarstar I ordered for it came earlier lmao

[smoky thunder]

I almost got a 105 too

Hopefully I don’t have many issues with my shit for a while either

I kinda wanted to do gas cause I figured it’d be easier to work with but everything’s telling me the opposite

[river bison]

@smoky thunder it’s easy and hard

There only hard thing about gas is sourcing the parts

But fixing it is easy

Mag availability is also a big issue

[smoky thunder]

Yeah, seems more mechanical which I like

Dude those mag prices are pretty rough alone

I was going to go we

They seem like they have enough of an aftermarket

[river bison]

We is cool since the mags are cheaper and I can get the drum mag easy

I’m prob gonna get an MTW soon

Since black variable has the HPA mag adapter

[hushed yoke]

theres already a airsoft 3d model

[crystal rover]

Nice vid, shit filter

[warm steppe]

Thx

[limber flame]

fun fact
your BUIS you put on are now naturally zeroed for 600 meters

in order for them to co-witness correctly you need a zenit B-33 and the B-19 upper handguard

because them rails are perfectly inline

[dark juniper]

does the 19x look real? i removed the orange tip with a shit ton of brute force

[rugged salmon]

Nah looks like a squirt gun

[limber flame]

mfs be 19 posting

[elder anchor]

mod L

[frozen raven]

Just waiting on my bootleg SRO to arrive

[frozen raven]

Goofy ah red dot mount

[sour mango]

you don't find it too low?

[frozen raven]

@sour mango No, co whiteness nicely

[sour mango]

when i wear any kind of lower mask i always found red dots to be way too low

[frozen raven]

I wear a mesh lower mask and I can use the irons on both my aks74 and 74u

Heres the face protection I use

Pretty basic

[rugged salmon]

idk hw people use mesh masks without the padding on the sides

[honest meadow]

tbh idk how ppl find either of them comfy i used to wear them but once i switched to a mesh mouth piece inside a balaclava never gonna go back

[rugged salmon]

ye i might switch to one of those once i get a helmet setup

how well do they stay in place?

[honest meadow]

aslong as the balaclava is decently tight fitting to ur face ittl be fine u just cant have the balaclava over ur nose cause it gets to loose

[rugged salmon]

interesting

but yeah i might just stick with the lower face pro that i have rn bc the balaclava might get too hot down here in florida

[honest meadow]

yea if ur gonna do a balaclava setup in florida id reccomend getting smth like the arteryx hot weather balaclava might be exspensive but its worth it to not overheat mid game

[frozen raven]

i have one but cant stand the fabric

[elder anchor]

just dont

👍

[sour mango]

bad idea lol

[river bison]

Got sac lenses on the contour

[copper beacon]

@river bison shipping to basic tomorrow

Weeeee

Ill see you at the field if i dont get my phone during basic on sundays

[frozen raven]

good luck, avoid sick call at all costs

and dont mention anything airsoft related, you will be clowned

[chrome stump]

after the Garand Thumb video where he got the (i think) japanese guy to come out and do drills with them after all the dry practice he'd done in Japan, including an impromptu perfect malfunction clear, you'd think it would be slightly more respected

[frozen raven]

Doesn’t matter DS’s will never let you live it down reality is of no concern to your superiors

[chrome stump]

true true, and they'll likely assume youve been doing it wrong the whole time and will want to beat scream that out of you

[frozen raven]

No they will just make fun of you for being a cringe larper air-softer (this is true)

Also airsoft in general is cringe being dressing up like soldiers and shooting each other with toy guns that cost enough to finance a week of groceries

I love this hobby very much

[river bison]

@frozen raven you say that and yet here in Benning/Moore we have senior NCO’s and officers who play airsoft

Rangers, SF

Everyone lol

It’s only cringe because people make it look or sound cringe

[frozen raven]

bro we had a guy get ripped a new one so large he went to CBHS

might be a fort sill problem tho

or just a 1/22 problem

[river bison]

Or... maybe he was just cringe and if he couldnt handle being ripped into he shouldnt be in the army

[tribal tree]

Yeah guys I airsoft 😎
(Gets smoked)

[frozen raven]

he was the most normal person lol

[river bison]

im an NCO lol, i play with joes in my unit

[frozen raven]

i was the weirdo collecting MRE TP for kicks

started doing it when we where all sick as fuck and leaking everywhere

This is what’s left

[elder anchor]

Just don’t get shot in the mouth

[elder anchor]

Which contour?

[river bison]

I forgot which roam series it is

Got it with 2 sac lenses and a arc rail mount

[elder anchor]

Stg all contour cameras look exactly the same

Pretty nice it came with an arc rail mount tho

[sour mango]

I have one of delta mike face pro's it's good

[elder anchor]

So do i and it’s not for me

I’m unfortunately a minimal face pro advocate

[sour mango]

Any reason for not liking them?

[elder anchor]

Makes breathing uncomfortable, irritates my face, difficult to position appropriately with headwear, just objectively worse than a balaclava imo. Protects your face sure but who needs teeth anyway

[sour mango]

I understand your points but last one 😄

[elder anchor]

Last one isn’t very serious I don’t think.

[smoky thunder]

Yeah, me and my guys are trying to figure out our face pro situations right now. Most of the options look goofy and uncomfortable

Figured I’d get a mouthguard for my teeth and just wear ballistic goggles and a balaclava

And just hope I don’t get my lip split otherwise lol

[low umbra]

that's what i do

[smoky thunder]

How’s playing with a mouthguard?

I definitely don’t miss needing one in my football days

[low umbra]

i first had like the cheapest one i could find

like a mesh one

and it broke from a few cqb shots, bbs and debris in my face

under balaclava

not fun.

so make sure to get a tough one, ppl even say don't get mesh at all but how are you gonna breathe

ig paintball mask or a whole head helmet

[smoky thunder]

Yeah that sounds really shitty

I was looking at those kinds too for a minimalist option but that sounds… suboptimal to say the least

When I say mouthguard I mean like this

This looked promising-ish til I read your testimony and now the description https://www.evike.com/products/58422/

[elder anchor]

The realistic chances of getting your teeth shot out are incredibly low. It happens, almost everyone knows someone, but it’s low enough to the point I’d exchange long term comfort for safety

You’ve got to be shot by something pretty powerful from pretty close, which here at least is rare

[smoky thunder]

Makes sense

I’m still a little concerned tho, it looks like most of the fields around me are cqb fields

[elder anchor]

Not being funny, just don’t get shot in the mouth

[elder anchor]

Fuck that

[smoky thunder]

Fuck a cqb field? Or the concern? Lol

[elder anchor]

CQB

Where you find the stereo typical airsofters

[smoky thunder]

That was my original take on it, then I realized I’d be playing cqc with kids

Ah

The outdoor fields I can find that aren’t paintball fields are all at least a couple hours away

Pain

[elder anchor]

Get all your buddies to chip in and just make a site lol

Pretty cheap

[smoky thunder]

Fr?

That might not be a bad idea…

[old latch]

Idk what look specifically you're going for but what works for me is a mesh balaclava. I wear a FAST helmet and ess nvg goggles with it as well as a headset. Thats lot of stuff on in my head but it's actually pretty comfy, never bothered me. Doesn't look particularly goofy either, maybe that's something for you

[frozen raven]

Anyone know where to get these outside of aliexpress?

Having payment issues on Ali rn

[smoky thunder]

Got a link? I’m interested

[river bison]

Amazon has some and evike

I put one in my surefire scout

And some of my LPVO’s

[frozen raven]

I looked for them on Amazon but couldn’t find one for an SRO

[limber flame]

just like
cut out a piece of polycarbonate lmao

[frozen raven]

Do that right now

[limber flame]

get it right and it should have a friction fit

[frozen raven]

This instant

you have polycarb laying around right?

[limber flame]

i dont have any

go to amazon

get sheet of poly carb

piss cheap

easy

then just like
dremel or file the correct size

[frozen raven]

That’s my plan of this one gets shot out but cutting it isn’t super simple

Last stuff I did cracked

[old latch]

https://evike-europe.com/604529.html
That is the one I have, there's plenty like it though

[elder anchor]

If you have land/know of an abandoned building it’s pretty simple

As long as the land is “interesting” then people will come

Especially if there are no fields nearby

Renting an abandoned building/facility is usually the best play, just H/S issues, which I mean are just a pain

But navigable

Means you can set shit up how you like and I’m ngl some sites make a killing it’s unreal

[crystal rover]

Or you build a field, charge ppl $35 for a 3 hr session, and pay your refs shit so you make bank

[lost dove]

my field charges $35
Now $37 with tax
All day admin but people still get there later in the day and have to pay $37 for barely any time

[crystal rover]

Lmao

[lost dove]

I paid admin and my gun didn't even work so I just sat there for 4-5h working on my gun and just went in without a gun for the last 2

[crystal rover]

Oof

[lost dove]

I was suffering
Gun works now but I need a new AK

[river bison]

Lol motherfuckers over charge

Our field in fort benning is free

The surrounding fields are 10 dollars with free HPA refills

The most expensive is team airsoft north of Atlanta and they charge 25 dollars with lunch/dinner included

[rugged salmon]

yeah theres only like two fields down here in florida that charge like 35 bucks per entry

[river bison]

That’s surprising

[rugged salmon]

your telling me

black tiger and cia

which cia is indoor

and like 3 hours away lol

but yeah covid and hurricanes shut down most of them down here

[elder anchor]

Airsoft in America is cheap as fuck Jesus

[river bison]

Yeah it’s supposed to be

[elder anchor]

I wish it was here

£30 for a day without membership

No lunch no nothing

[limber flame]

real

we used to have a lil burger truck here but some kids set it alight

as it was stored in a garage on site due to space limitations

[rugged salmon]

same here in florida lol

[frozen raven]

It’s 20 bucks a day with free HPA refills here

Also gives free tech support as well

And if your battery runs dry he will give you a rental vehicle be that you trade back in to get yours back

It’s a very good community vibe

[old latch]

I know the vfg looks like a Tarkov meta thing but it's actually what I found works best, the BCM I had on there before doesn't cut it

[low umbra]

looks rly cool

[river bison]

Agh god damnit UPS rescheduled my delivery for the Noveske

I was wanting to work on it this weekend too

[smoky thunder]

Bummer

My shit says it gets here tuesday

Pretty excited to check it out

[honest meadow]

only problem is that bipod man dont see any use outside of replication of a kit

[frozen raven]

Looks very cool

Weird lil Mac carbine

[honest meadow]

swear its an uzi

was just lookin at that haha

https://www.patrolbase.co.uk/double-bell-m203-40mm-under-barrel-9-grenade-launcher?pv=18666 im tempted

[frozen raven]

Mfw a double bell product is shit 🤯

[river bison]

Lol I’m guessing whoever your courier is is celebrating Juneteenth

[elder anchor]

Nevermind the VFG what’s going on with the grip

[river bison]

Mm more aor1 stuff

I wish it came earlier

[crystal rover]

I have a problem

I bought another mp9

For $20

[frozen raven]

damn

[muted bloom]

I don't like it, the handguard is ugly, the pistol grip is also ugly and the bipod is lame

[slate leaf]

Shi I fw it

💯

[frozen raven]

What gun/company

[old latch]

Too bad, I like it. Bipod comes in handy often enough to be worth the weight

[old latch]

There isn't really a point to the rubber thingy, the shape of the grip itself is pretty comfy though, I didn't like the angle of the stock Specna grip.

[old latch]

Reality is my wimpy arms just get tired holding it and occasionally I just post up on a roof with it.

[muted bloom]

no way

[old latch]

I like how you just say no when I say why I run it. I'd take it off if I felt it's not worth it, I don't carry stuff I don't use. Though I might take it off eventually - it's not an essential part it my rifle, fair enough, but as of now I get enough use our of it

[sour mango]

Wish that airsoft companies innovated more and created some unique rifle not replica's from irl

[elder anchor]

Why

That defies the point of airsoft

Play paintball

[limber flame]

tey have tried

(they all were utter shit)

[river bison]

I’m gonna try and go to this event in sept

https://www.thirdcoastairsoft.com/seriousviking

It’s only 40 mins away

[knotty verge]

What’s y’all’s favorite gun for airsoft and why?

Also, just wanted to say this gun I bought is really good, already fell in love with it so feel free to give it a shot https://youtu.be/KpZTv4WIo-o

[frozen raven]

I’ve been looking for a all metal with markings m4 AEG

[river bison]

I have two of those

My favorite though

[knotty verge]

Nice!

[velvet pagoda]

Going to an airsoft store this week, give me a good list of brands to seek and brands to avoid

[river bison]

@velvet pagoda US?

[crystal rover]

Welp I have got myself stuck into more fucking gbb problems

[crystal rover]

Aps, aw customs, lancer tactical, valken

[river bison]

^avoid

[crystal rover]

Yes avoid

Look at cyma, elite force, vfc, Tokyo marui, we-tech

That from the top of my head atleast

Oh and kwa

[velvet pagoda]

Yes

[velvet pagoda]

Bro wdym

I have a valken

Its heat

[crystal rover]

They ain’t

They are proprietary af

[velvet pagoda]

Wdym like only use their mags

[crystal rover]

The internals

The body’s

They are shitty

Don’t use

[velvet pagoda]

Is that why they’re bad or do they fail

[crystal rover]

Both

[velvet pagoda]

Bc i heard only the gears fail if you dont fully pull trigger on semi

Its been very fun to shoot otherwise

I got it for $175 total with battery and charger and 1000 bbs

So i was like not bad

[crystal rover]

Of you pulling your trigger half way on semi and it’s full autoing. You should be questioning the quality of the gun

[velvet pagoda]

No im saying half pulling and it like starts grinding a bit

Not really affecting but apparently if you do it alot it wears down

[crystal rover]

Oh yeah, still an issue

[velvet pagoda]

I have been having fun with it

It was my first one

Ill let you know if it has issues

I only use airsoft for plinking so its not getting like dropped or tossed around

It shouldnt break for a long time

[crystal rover]

Fair enough

[limber flame]

avoid

their AEG's are pretty shite

and their gas guns if they work are mid at best

but they only make a few shiners

the rest are just shite

[knotty verge]

@4k Gen 3 lancer tacticals are good, I’ve had mine for 2+ years and hasn’t even shown any signs of wear and tear

[river bison]

@limber flame bye bye foldy boi

[sour mango]

i was tempted to do that to my mp7

[elder anchor]

have you put the hydra on any rifles yet?

[river bison]

Not yet

[frozen raven]

My 19 dollar aliexpress RMR arrived

Not bad

Thought I ordered an SRO but I check back and got the wrong option

[honest meadow]

Put some armoury numbers on my AK how's it look?

[frozen raven]

@honest meadow Decent I’ve never seen them that low on the mag before tho

[elder anchor]

Very slightly overdone but looks cool

[rapid wolf]

drop the link

[crystal rover]

This is the swap meet collection

[rapid wolf]

what are some good modernized ak-74us

im not really a fan of the wood and the triangle stock look

[elder anchor]

Triangle is the Shiz idk what you mean

(Rip Mike )

[knotty verge]

What’s the ergos on it??😂

[lost dove]

oil

[rapid wolf]

i dunno its not my style

also put them grippers away 😭

[elder anchor]

No toes no hoes

Simple as

[rapid wolf]

put those dogs away man

[elder anchor]

I could never

[rapid wolf]

i like this kind of stock

pdw stocks and folding stocks 😍

[elder anchor]

Buy an MCX then

[rapid wolf]

but i want an ak 74u

mcx is in consideration tho

i dont like how the battery is in the handguard tho on the mcx

[elder anchor]

There are pic stock adapters for 74us

[rapid wolf]

its kinda jank but i guess with no buffer tube thats the only place

[elder anchor]

You could have that stock if you’d like

[rapid wolf]

yea ill prolly have to look around more

[elder anchor]

5ku

[rapid wolf]

idk much abt airsoft aks

this will be first proper ak if i get one

https://www.evike.com/products/14944/

i do like the look of this tho

idk if the brand is any good

the psd model is also way more expensive than others but it’s got what i’m looking for

[elder anchor]

Arcturus is good

You won’t have any problems

Solid gun

[rapid wolf]

cool

it’s this vs the mcx or like any generic ak74u

[elder anchor]

You may have technical problems with the mcx

Because VFC

They flopped on the MCX Qc so hard

But 9/10 MCXs are perfectly fine, just very pricey

Modding a semi decent stock 74u will also be pricy

[sour mango]

Cyma could be good to mod

[elder anchor]

Cyma is fine to mod, along side other VFC model alternatives, furniture is simply expensive

[rapid wolf]

yea i think imma just go with getting an ak

mcx is cool but it’s another m4

[river bison]

Ehhh not really

[rapid wolf]

m4 - buffer tube*

[honest meadow]

Mcx has 10x swag points over the m4

[rapid wolf]

guys stop

idk what to get now