airsoft

[humble token]

and finish wear is cool

that's a T1 clone

I'd suggest a T2 clone

[rugged salmon]

yeah ig im just mainly worried about it damaging the mount

[humble token]

nah, it'll probably be fine

[rugged salmon]

alr

also do you have any brands that i should look for for a t2 clone?

[humble token]

if you're really worried, use the paracord tip

[humble token]

only for real fire arms

[rugged salmon]

is that a brand?

[humble token]

the brands I know are like 100+

[rugged salmon]

ah alr

welp imma head out but thanks for the advice!

[humble token]

do this btw

inbetween your sling and the QD

and it's quieter and scratches shit less

[rugged salmon]

Yeah this is how I have mine setup

Actually some electrical tape around it should help

[honest meadow]

Get a Feyachi prtty bullet proof for 30

[crystal rover]

No they aren’t lmao

Just save up and get a Sig msr

[rugged salmon]

arent sigs like 125+?

[crystal rover]

The sig msr is like 88

It’s their budget option

[honest meadow]

ive had one for 3 yrs not broken just a couple scuffs and has held xero after falling on my gun and dropping the case with it inside a couple times

[crystal rover]

They are the same Chinese crap other repro companies make

Also they way they treat the people they sponsor is horrible, would never support someone like that

[honest meadow]

some people dont want to fork out for a budget rs optic

[crystal rover]

It’s only 40 dollars more and if you ever get a rs gun you already have a usable optic

Ontop of the the quality is like 4x better

[honest meadow]

UK moment

[crystal rover]

The dude who less feyachi shot is based in Texas lol

I have met him

It’s dead ass jsut Chinese crap

[honest meadow]

sunday gameday pics

[dry bloom]

k

[humble token]

if it's a RS red dot that's good, it's usually worth the money

usually cheaper dots that are worth buying cut features more than they cut quality

and then there's holosun

[elder anchor]

Vector optics maverick if you’re in the Uk

Holy warrior if you’re looking for quality repros

Just never the budget Chinese shit, even here

[limber flame]

vector optics is like
unironicaly good

[humble token]

unless holosun basically

[elder anchor]

It shouldn’t be the case but… it is.

[elder anchor]

Yh but that’s not necessarily budget Chinese shit when it comes to airsoft

[humble token]

not airsoft per say

but budget rs sights very much so

[kind sinew]

my ass aks-74u build

[elder anchor]

Yeah, but really that doesn’t need to be said

Budget RS optics are simply good optics in regards to airsoft

[lost dove]

current somewhat crappy rusfor kit

[fiery jungle]

The gun is bigger than you

[limber flame]

why bros helmet look like one of them rice farmer hats

just in digi flora

shits huge

[low umbra]

dust 2 ct model

[somber tree]

Got the same suppressor

[low umbra]

love that pistol grip

[river bison]

@elder anchor

Tang 6t lol

[elder anchor]

Lol

Airsoft

[river bison]

Crazy I know

I think it’s abit excessive on the shorty urgi

I should put this on the GBB

Also for airsoft vector optics is a god send

Sig msr red dots are also good

Lower end holosuns are good especially on GBB’s

[low umbra]

ty needed this info

need optics

really wanted to just bite the bullet and buy real steel holo

but my reasoning is only for the looks, but it's still an optic so needs to be usable aswell

[river bison]

Are you in the US?

[low umbra]

nope

already spent so much on other upgrades

[river bison]

If you want good repros go get holy warrior repros

I can guarantee you those damn things can handle a recoil up to a 5.56 as far as I’ve tested em personally

[low umbra]

how is the glass

i don't even want a real holo because of the holo

[river bison]

They are actually pretty good

[low umbra]

alr thanks

[elder anchor]

My vector optics maverick has packed it in so I might have to nab one lol

They are aimpoint print right?

[river bison]

What happened to it

[elder anchor]

As in mounting

[river bison]

Yeah

T1 style

[elder anchor]

Absolutely no idea

[river bison]

I put em on a unity riser

[elder anchor]

It’s just finally stopped

[elder anchor]

Oh sick

That’ll do perfectly then

[elder anchor]

damn I like it a lot more with the shorter foregrip

[river bison]

Initially it has the long grip because it was an EBB that needed a battery grip

Now it’s an HPA so I can afford to get rid of that grip

[elder anchor]

looks really damn good dude

you gonna put that pressure pad rail cover thing on it im presuming?

[river bison]

Nah I took it off

[slate leaf]

hpa

[lost dove]

Y e a h

[lost dove]

I Gotta concert my AKM into a 74 since I'm go lazy to buy one

[lost dove]

the 6b47 is huge on my head

[limber flame]

swap mag inshallah

[lost dove]

I'm gonna waste too much money putting fake zenitco on it

[limber flame]

[slate leaf]

Post kit

[gloomy sequoia]

some pics from my last game

[low umbra]

mikhail jordonov logo

[latent glacier]

Helmet is balistic

[limber flame]

he did lmao

scroll up

[fallow seal]

WZ.93 😋

[polar gate]

[inner wasp]

wall is home made :)))

so as the aluminum holders

[frozen raven]

Every aramid Russian helmet I’ve seen is always comically large for some reason

[lost dove]

I love it

[frozen raven]

Comically wide 6b7-1m

[lost dove]

I gotta buy a 6b71

[frozen raven]

I need to replace the harness in mine

[crystal rover]

Comically narrow head

[frozen raven]

I wear a US large size helmet💀

[crystal rover]

Big forehead

[frozen raven]

I have a very large dome

[limber flame]

why do you have the front sight on

with an absolute cowitness optic

krytac spr meta though

[inner wasp]

just for looks for now

when i play i take it off

[rapid wolf]

is there any way to lower the hammer/striker of my ef glock 19

[limber flame]

what do you mean

[rapid wolf]

i installed a slide without the gas nozzle in it and pulled the trigger and now i cant get the striker to go down and i cant remove the slide to put the one with the gas nozzle back on

[limber flame]

ah

gonna either have to find something to shim under or through the ejection port

gonna be awkward though

[rapid wolf]

the back of the slide is open so i can fit my fingers in there but i just cant get it to stay down

[limber flame]

wait a sec

idk if its entirely the same on VFC but id assume so

reset the trigger and knocker with the first little bit

then reset the hammer

[rapid wolf]

AHHHH THANK U

[limber flame]

the last one idk if it makes a difference or anything

[rapid wolf]

i didnt even know i had to push the thing on the right

i was just pushing the striker down over and over like a monkey and going "why isnt it working?"

[limber flame]

we've all been there im sure

[frozen raven]

me tryna fit a lancer tac optic on a B-18 rail

[rapid wolf]

[limber flame]

lancer moment

(theyre shit)

[frozen raven]

(That’s why I got it:) )

🥲

[limber flame]

💀

[rapid wolf]

[limber flame]

@elder anchor peak optic
new meta

thats a little silly

[frozen raven]

it auto censored sh!t for me

[limber flame]

lmao

[latent glacier]

VP 2016 Vz. 93

its czech not polish 😂

[fallow seal]

damn

same pattern

[latent glacier]

almost

[low umbra]

huh what is the blacklisted word(s)

[limber flame]

idk

[low umbra]

fuck?

manufacturing pov

[limber flame]

automod here is wack

[low umbra]

?????

[crystal rover]

Type till you find out what it is

[low umbra]

i typed over the whole sentence and it blocked it too hmm

i dont even understand

that bad from a

a manufacturing pov

[frozen raven]

NO SWEARING IN THE TARKOV SERVER

[low umbra]

fuck up that bad

i give up

[frozen raven]

💀

[crystal rover]

Did it to me too

[low umbra]

ok my curiosity brought me back i have an idea

i dont even understand how its possible to

so it defo has something to do with fuck

found it guys.. it's
to phuck

[crystal rover]

fuck

[low umbra]

with to in front

so specific..

[crystal rover]

Ye

[rugged salmon]

hey anyone know how dangerous it is to keep a lipo with the black plastic broken?

[slate leaf]

New whip

3d printed supressor and foregrip

[elder anchor]

Don’t spend too much on an optic, it might work

[crystal rover]

Why red

[elder anchor]

Omg same only mines cooler

[slate leaf]

Its pink lmao

The manliest color on the planet

[crystal rover]

That’s subjectively worse

[slate leaf]

What mags are those ive mever seen em

[slate leaf]

Tf its not

Think if i come around the corner and shoot you in the face all you see is a pink supressor

[elder anchor]

Bunch of people make em

Idk what they’re called irl

Got mine from battle axe

[slate leaf]

They look like m4 waffle mags

I imagine thats what they are based off of

Those are neat i might have to look into em

I just run pts epm1s

[crystal rover]

I would think they are nuts

[slate leaf]

Yet you would bave been shot in the face it would be funny to me

[crystal rover]

Your assuming that you

1. Get a shoot off first
2. Hit them in The face

[rugged salmon]

hey anyone know if accidentally breaking the black plastic around a lipo is dangerous?

[slate leaf]

Your assuming i wont

[slate leaf]

Yes absolutley

[rugged salmon]

or could i just patch it up with electrical tape

[crystal rover]

Put some electrical tape around it

[rugged salmon]

ye not a big break in it

[slate leaf]

If yku try and charge it you will possibly cause a lipo fire

If its not that bad you can use electrical tape but uf it was up to me id just buy a new one

[rugged salmon]

its just a small tear like this

the cells arent damaged

[slate leaf]

Use electrical and use the battery at your own risk

[rugged salmon]

just my "special" little brother that i left alone tried to fit it into one of our guns

[rugged salmon]

ight

thankfully i dont charge my batterys without keeping an eye on them

[slate leaf]

And might i add never use a charger that isnt smart stop capable

[rugged salmon]

also anyone got any battery recomendations for a ak? (it needs to be a 7.4)

[rugged salmon]

how much do those usually cost?

[slate leaf]

I paid 40 for mine

[rugged salmon]

alr

[slate leaf]

It has a led display that shows me how many volts are in the battery while its charging and starts beeping when its finished and its fast charging

Its the Titan smart charger

[rugged salmon]

do you think the chargers around 15 bucks are safe enough or should i just go for the 40

[slate leaf]

Ive had lipo fires with cheap chargere

Invest in more expensive chargers

[rugged salmon]

alr

[slate leaf]

You will thank yoyrself

[rugged salmon]

how bad are lipo fires usually?

[slate leaf]

Not horrible but they can cause damage if you dont catch it

[rugged salmon]

alr

[slate leaf]

And they smell horrible so youll know lmao

[rugged salmon]

lol

also do you know of any good lipos for aks? im havin a hard time finding one that will fit

[slate leaf]

Let me grab what i ues

Is your ak top wired or rear?

And deans or tameya?

[rugged salmon]

tameya and top wired i think

also is somthing like this a fire starter? https://www.amazon.com/SUPULSE-Battery-Charger-7-4-11-1V-Charger（B3V2）/dp/B099K8XFG6/ref=sr_1_6?crid=3AR2Y2DEUKU72&keywords=supulse+lipo+battery+charger&qid=1683831072&sprefix=supulse+lipo%2Caps%2C121&sr=8-6

[elder anchor]

stick batteries

nuprol are the standard

i dont think titan make batteries for AKs but i dont recommend titan at all anymore

[slate leaf]

Yes lmao

[rugged salmon]

alr lol

[slate leaf]

I use these little dudes, great batteries but they are deans

[rugged salmon]

oof r they 7.4?

[slate leaf]

yes

[rugged salmon]

alr

what brand r they?

[slate leaf]

let me check

Matrix

[rugged salmon]

kk

[honest meadow]

i have this battery and it fits in the top cover and into the gas tube perfectly fine

[slate leaf]

yeah those work too

my buddy runs an ak as well and he uses one similar to that

[honest meadow]

yea tbh its just a rc car battery stretched out its made by VP

[honest meadow]

which is a rc car brand but they do different batterys for airsoft too

[slate leaf]

@rugged salmon this is the charger i use

32 bucks

[rugged salmon]

yeah my dad just got a cyma 105 so im just tryin to find one that fits in the dust cover

[rugged salmon]

oh thanks

[slate leaf]

yea def the one i sent or @honest meadow work great

[rugged salmon]

yeah if i end up findin some extra money ill prob invest in one of those

[honest meadow]

the battery i just posted fits in my E&L 105 so itll fit perfect

u could go for a larger one that has more juice cause it leaves around half the topcover open as empty space

[rugged salmon]

this is the one i ordered looks like itl fit

https://www.amazon.com/Evike-Airsoft-Performance-Battery-Configuration/dp/B091G3K6PQ/ref=sr_1_4?crid=2RZR42JR93CO1&keywords=matrix+lipo+battery+7.4&qid=1683831726&sprefix=%2Caps%2C92&sr=8-4

[honest meadow]

yea thatll be perfectly fine

majority of the time its not the length but how wide the battery is

[slate leaf]

yeah that will work great

[rugged salmon]

but yeah dude 105s r slick

found a good deal on a cyma

like 180-170

[honest meadow]

This is how my E&l looks rn

[slate leaf]

I had a E&L ak74n and it was the goat

[honest meadow]

yea just got a lipo for mine and it shoots real nice now and is very snappy compared to the sluggish 8.4 nimh i had to run before

[slate leaf]

lipos are a game changer for sure

[honest meadow]

ffs i forgot to talk my intel folder out of my docs case yesterday and now its not fir

[rapid wolf]

i lose 150k every time i go labs but its ok cuz i made 600k in 1 raid so that gives me the dopamine i needed to keep losing 150k each time i go labs

[rugged salmon]

oh dude thats sick

what handguard is that?

[honest meadow]

just a b-10m

u can pick one up from 5ku or lct prtty cheap

ima swap it soon for either a hex handguard or the 5ku vs-25

[rugged salmon]

sheesh dude 80 bucks for a handguard

i mean ig it sorta makes sense but thats like half the price of the actual gun itself lol

[limber flame]

thats piss cheap lmao

look at the actual ones price

[honest meadow]

yea probs gonna go for the vs-25 instead of the hex

[rugged salmon]

ik i meant its relatively expensive when you take the price of my ak into account

[limber flame]

erh
maybe

[rugged salmon]

also this is the build im goin for on my mk47

got a t1 clone comin in and some tan mags

[humble token]

peq clone as well?

[fallen gate]

AS VAL (lct)

[rugged salmon]

ye

[slate leaf]

Hows the ergonomics?

[latent glacier]

[fallen gate]

pretty good in cqb when you fold it but mags are shit because it's hard to remove

[humble token]

sounds like a skill issue

[fallen gate]

probably lmao

[limber flame]

they will get easier

LCT's have a tight magwell ive noticed

[river bison]

LCT’s have a magwell insert that helps

[limber flame]

not for their VSS's iirc

also this isnt an over insertion issue

more of
its stiff as fuck and will take time to ease up

so just do what i did fir about an hour

practice reloading

[gray python]

https://cdn.discordapp.com/attachments/923935194262679572/1086553137013346374/IMG_20220802_203836_935.jpg
rate my 416

[river bison]

What version is this

Is this the 1st gen VFC?

[crystal rover]

Weird ass 416

[limber flame]

"tarkov meta"

[gray python]

i bought one of parts and put it together so there is no version

receiver is enc body

[honest meadow]

Goofy/10

[gray python]

as ur ak?

[slate leaf]

Did you have to upgrade it at all

I hear lct gearboxes stock are doggy dogshit

Never had an lct but came close to pulling the trigger on a RPK

[fallen gate]

I posted old photos and today my LCT AS VAL trigger is broken idk if it's the gearbox but probably I need to repair it so yes it's dogshit xD

I also replaced the whole electric wires because an electric arc appeared (maybe because I used a 11.1v battery idk)

[honest meadow]

👍🏼

[low umbra]

tarkov build/10

[slate leaf]

Yeah thats what i thought

LCT just isnt good until you put another $400 into upgrades 😂

Thata why i didnt get the RPK

[honest meadow]

u asked for my opinion i dont see why ur getting a lil heated

[tribal tree]

Pretty stupid lol

[limber flame]

relatable

[low umbra]

bro i didn't know it was gonna be slow motion at first so that confused tf out of me

as if that was a some 3d render or sum

[slate leaf]

Crye avs???

This is my plate carrier

Shellback tactical rampage

They make a baller plate carrier man

If you get it all set up nice n neat to your preferences you will forget your wearing it

And the belt you can barley see is the haley strategic D3 belt

Also pretty neat

On the back of the plate carrier i just run a little assault pack and a rolled up american flag zip tied to the carrier

Usually ill run a radio on it too but this pic was at a local field so i dont run my radio there

Idk if any of you guys watch airsoft youtubers but that pic was with airsoft alphons at our local field

Really cool dude

[tribal tree]

This is a 3d render

[river bison]

Used it for work and chairsoft

FCPCV5

And my JPC 2.0

Damn thing is salty and has seen several overseas tours

A Ferro Slickster and a K19 2.0

[slate leaf]

You a veteran?

[river bison]

active duty still

[slate leaf]

Ah what branch?

[river bison]

army

[slate leaf]

Nice, im enlisting soon to the marines.

[river bison]

im assigned to the ranger school in Ft Moore (Benning) lol

[slate leaf]

Oh thats cool

Yeah i graduated high school last year and i decided to take a gap year and work and just hang out with family and friends so now its time to do what i want to do so im joining the marines in august, i just have to finish up at my job and then im a free man

Ive already talked to recruiters n shit so i know what i want to do and all that im excited man

[river bison]

I mean if you change your mind army is also open if you want to do cool guy shit

Be airborne, go to SF selection, SFAB (Advisor), etc

[dapper yarrow]

USEC operator bringing the wrong loadout to woods circa 2023

[slate leaf]

Tuff

[slate leaf]

Yeah i tried to do that but umm funny story. Marines invited me to a pooley pt sesh and offered to talk to me about stuff and its right next door to the army recruiting base and then i texted army recruiter and he ghosted me...

So i think i burnt that shot lmao

[river bison]

Lol theres more than one recruiter

After my time here in ranger school I’ll be doing recruiting myself

[slate leaf]

Yeah but im scared to go back in lmao

The marines are nicer too

[river bison]

I’m so burnt out from all the ranger stuff

[slate leaf]

Im going to do infantryman then they told me i could go to recon and i looked into that and it looks pretty badass. So id go from basic to soi to brc i believe

Something like that but im pretty set on it.

[river bison]

I mean best of luck to ya

[slate leaf]

Just have to finish up my contract in august then im free

[fiery jungle]

what oils should I use to oil my gas blowback pistol

[low umbra]

i thought this was the navy seals copypasta for a sec

[limber flame]

silicone grease

https://www.youtube.com/watch?v=p_4PWj-w9R8&t=319s

https://www.youtube.com/watch?v=5JPLe5R8-Ms

[fiery jungle]

thanks

[slate leaf]

No lmaooo

[slate leaf]

Silicon lube

Idk if this is any bad or not but ive used wd-40 a couple times

Its silicon based and works just fine

[limber flame]

not regular wd40

and for gas guns you dont use oils or liquidy lube

thata more for enclosed systems

you use grease because it stays in place

[fiery jungle]

What about bolt action guns? Can i use silicon oil?

[limber flame]

you shouldn't need to oil or greese bolt actions

unless its complete disassembly
even then its just a super tiny amount on the cylinder head rim

[fiery jungle]

Aight

Thx

[slate leaf]

bro got a meta tarkov build irl 💀

[slate leaf]

Held up by the corona

Thats epic

[night scarab]

idk why but i dont like jpcs

they're good ik but it just reminds me of extreme larpers

[river bison]

It’s synonymous to operator shit

[night scarab]

yeah

the caggers man

[river bison]

Personally use it for work because it’s effective

It’s comfy as hell

[night scarab]

yeah im sure they're nice

i bought a SPC recently and im just waiting on everything to arrive

had to buy the ferro pouches from like 6 different websites cause mc is sold out everywhere

[river bison]

It’s one of the few carriers I can stand to wear in this humid weather

[night scarab]

i have been told by multiple people that the SPC is either good for water dissipation or that its awful and pools sweat

i was considering an AVS too but its a bit bulky and i dont really wanna go through the effort of building one

[elder anchor]

You mean people with money?

[night scarab]

a livable amount of income when you live in a basement and pay no bills can feel like alot of money 💀

[elder anchor]

Most of the time people who dislike “operator Larp” just don’t have the same amount of shit to throw at the hobby

So they sit there with their E&L under folder, DPM webbing and pot helmet and pretend like the people who do have those kits simply have no taste

[river bison]

Or you mean people smart with their money or people who actually do cool guy shit primarily

[night scarab]

I feel like there's classier shit you could buy than a JPC and a 10.5 geissele

[elder anchor]

Nah

[elder anchor]

Post kit

10.5 geissele supreme

[night scarab]

Will do when the SPC arrives, but as of now the hexgrid is my prized possession

[elder anchor]

Out here shitting on JPCs when you have a 5.11 carrier

[night scarab]

You think I bought a 900 dollar tarkov carrier to wear

There's a reason the SPC is coming in

[elder anchor]

Hexgrid is cool in the same way the Hera arms M4 is cool

[night scarab]

Tempted to put together a tarkov cosplay with my wendy bump, hexgrid, and a hera furniture m4

[night scarab]

In the meantime I play the game of avoiding building an AR setup

No, the picture is not reversed, Yes, I am wrong handed

[elder anchor]

The MPX is pretty tight

Why the BCM grip on something that’s effectively got a pistol length barrel?

[night scarab]

Comfortable grip with the pressure pad

also why I have it reversed

[elder anchor]

Does your hand not sit a little close to your muzzle is what I mean

I back the BCM grip obviously, seen as I use one, but Gahdamn it just doesn’t sit right with me there

[limber flame]

(theyre not)

((both dogshit))

[elder anchor]

(((He gets it)))

[limber flame]

that setup is genuinely baller as fuck compared to the previous iteration

[night scarab]

Might get a larp can to be a bit more comfortable

But yeah it's pushing it

[limber flame]

goodbye A2 grip (POS)

and the light setup looks nicer

[elder anchor]

Agreed, this was only temporary

I still have mixed opinions on this

The latest version is the best it’s been for a while

[elder anchor]

Larp can>

[night scarab]

dripgrid with cerium

the tarkov larp is real

[limber flame]

mid grid

BEAR drip will always be better

hoodie > cerium

[elder anchor]

Hexgrid looks like something a techno gear fashion person would wear

[night scarab]

slavaboo

I built an AK and I fucking hate it

[elder anchor]

I’m gonna nab a cerium in 24k to add to my collection

[limber flame]

tech wear mfs using black amazon JPC's worn backwards to look "good"

[elder anchor]

Innit

People are strange

[limber flame]

no plates either lmao

[limber flame]

drip or drown gamer

and brother im floating

[night scarab]

The AK build in question I posted awhile back

Mfw taped pressure cause the mount is mlok

[limber flame]

tape lmao

[lost dove]

no wonder you hate it

[limber flame]

i just used ranger bands for mine

[night scarab]

Fun fact there's something inside the receiver that slides down when I angle it and it will not come out

[lost dove]

what brand

[elder anchor]

Good apart from the tape idk what’s going on there

[night scarab]

Even with the dust cover removed and thoroughly shook

[lost dove]

looks cheap

[night scarab]

LCT

It is a LCT krink

[lost dove]

Ohhhh

[night scarab]

I put zenitco parts on

[elder anchor]

The arc cerium doesn’t even come in 24k what an L

[night scarab]

The tolerances were shit as it is with AK's

[elder anchor]

Gonna have to nab a thorium instead

[night scarab]

Had to hammer it for hours

[limber flame]

you know thats in the legit zenitco instructions lmao

hammer em into the receiver

[night scarab]

Truly despicable gun

[limber flame]

file and a hammer

[elder anchor]

AKs cost too much to make them bearable to look at

[limber flame]

the true RS and fake zenit experience

[elder anchor]

Krinks aren’t even special anymore

[limber flame]

real

krinks are mid

[night scarab]

I'm getting a TM MWS m4 and some nice Magpul Moe furniture soon

[limber flame]

(i want one but theyre too short)

me likey longer gats

[night scarab]

With a 14.5 Midwest handguard should go hard

[limber flame]

MOE mid lmao

[elder anchor]

Nahhh not the moe handguard please don’t do that to an MWS

[elder anchor]

Oh

[night scarab]

Don't worry

[limber flame]

only good magpul shi is the K2 grip and CTR stock

[night scarab]

Stock and grip moe

[night scarab]

Yes

[limber flame]

get a CTR stock

(better MOE)

and a K2 (better MOE)

[elder anchor]

I do wish I had the money to throw away for an MWS

The gun is stomachable

But the mags

[limber flame]

vfc BCM MCMR

mags arent stupid expensive

[night scarab]

Can't wait to violate ITAR and buy eotechs for airsoft guns

[limber flame]

and are for some reason
stupidly strong

[elder anchor]

I did look at that

[elder anchor]

The gun isn’t either I don’t think

[elder anchor]

Eotechs aren’t under ITAR are they?

[limber flame]

iirc its like 500

at most?

[night scarab]

Yep they are

[limber flame]

kinda, kinda not

[elder anchor]

More along 400 I think

[limber flame]

you can get them anywhere

[night scarab]

My ebay account got banned for trying to buy one

[elder anchor]

Either way loads of euros sell them

So doesn’t matter rlly

[night scarab]

They're up charged asf in Canada

[limber flame]

L

canada moment

[night scarab]

fr

[limber flame]

(deserved)

[night scarab]

What do we think abt this here

[limber flame]

CTR stock, K2 pistol grip and BCM MCMR rail

remember that the MWS is threaded for AEG spec rails

and the threads are longer

so you need a spacer

you cant put real rails on it

unless you fuck the threads up

[low umbra]

tm mws?

[night scarab]

Yeah

[night scarab]

Rip

Thought I saw some British guy doing it

[limber flame]

HAO makes solid repro rails that you can get AEG spec

[night scarab]

I already violated itar and bought the Midwest 💀

[limber flame]

are rails ITAR???

tf lmao

[night scarab]

Yep

[hushed yoke]

no they're not

[hushed yoke]

you need a new buffer

[elder anchor]

Just buy a WE then

[limber flame]

VFC>

can take RS rails and buffer tubes

[jade linden]

brand new 🤗

any modifications idea?

[elder anchor]

Internal modifications first

Always

New hop rubber new barrel is standard

New motor for optimal cyclic rate

Mosfet for protecting the gearbox and improving overal feel of shooting

Then prolly a short suppressor and some form of aim point repro, along with a flashlight

What I’ve said is basically the standard for modifications

[jade linden]

I like that.
I'll follow what you said and prioritize the internals first. Overall, the gun has a rather above-standard internal, but its trigger is mechanical.

[elder anchor]

ETUs come as standard/are heavily recommended with some mosfets

Gate titan/aster are great mosfets

Along with perun and the rest, which are slightly less trusted brands

Trusted is the wrong word, more like staple

[honest meadow]

i'd get a red dot asap to theyre a game changer

[jade linden]

I believe it will help, especially in positioning since it's short.
it is very accurate
I can hit a 20 cm gap in bricks within 25-27 meters of my window

[sour mango]

use it till it breaks

[jade linden]

it's gonna take a while

[honest meadow]

it does it gets ride of that heitation as u guestimate the first shot when not using a red dot

[jade linden]

red dot holosun* is good?

[honest meadow]

i love the mk4 rail man just hard to kinda hard to find in the uk

[jade linden]

i never see an before

[sour mango]

had to buy real steel one

[honest meadow]

yea holosun is good

[honest meadow]

yea the repro's are all out of stock

[sour mango]

aliexpress my guy

[honest meadow]

or aliexpress specials but thats mega sketch

[honest meadow]

in the uk it would be sus

[sour mango]

not really

[honest meadow]

i dont mind the rail i have on mine rn anyways so idrc

[jade linden]

200 dolars in one red dot. hell no

[sour mango]

its a real steel red dot

[jade linden]

yep

[scenic steppe]

wait until you see how expensive eotechs and acogs are

[sour mango]

I have Vortex Crossfire MK II red dot on my gbls

and it works perfectly

and lifetime warranty

[honest meadow]

hust get something like a vortex and then u have a life time warranty no matter what u do to it

[jade linden]

1000 dollars the most cheap in this page

I keep wondering if those from aliexpress are usable

[sour mango]

they are

[sour mango]

https://www.davescustomairsoft.co.uk/big-dragon-g-style-smr-mk4-rail-for-m4-aeg-9-5-and-13-black-grey-dark-earth

Dave from this website can get it for you easily

@jade lindeni wonder how much you spend on that aeg

[jade linden]

just enough. I saw some here on this site that you sent
take a look

https://www.davescustomairsoft.co.uk/weapon-accessories/red-dot-sights/holy-warrior-exps3-bk-de

https://www.davescustomairsoft.co.uk/weapon-accessories/red-dot-sights/holy-warrior-romeo-8t-style-red-dot-sight-black

[sour mango]

@jade lindenare you in uk?

[jade linden]

nawh. I'm from Brazil
that's why I cry when I see the dollar, every day of my damn life

[sour mango]

shipping would be expensive

you can find red dot sights on aliexpress

[jade linden]

I believe there must be something of quality there but I have friends who live in Europe and sometimes they send me some things

I'll continue searching

[elder anchor]

Why the fixed irons?

And why on gods green earth is the BCM grip the correct way around

[sour mango]

because i like the look of fixed irons?

[elder anchor]

Fair enough

Just wondering if there was a reason

[sour mango]

for example if my Vortex red dot gets shot out i have back up irons, and i prefer fixed sights as they take up less space then flip ups

On the longer upper I have magpul mbus sights in black

[sour mango]

and incase of BCM grip i have it that way because I find it more comfortable especially since my wrist is fucked from injury while back

[slate leaf]

Pic from recent event me and some guys went too

(I am pictured holding the bottom left corner of the flag with the ak)

[high rock]

what mag pouches do u have

my ak12 mags can barley fit in my m4 ones

even with ak pmags

[sour mango]

try sr25 mag pouches otherwise I have no idea, as I never run ak

[high rock]

what rifle do you run?

[sour mango]

m4, mp7, sa58

[high rock]

hmmm

very nice

[sour mango]

my main rifle costs pretty penny rn

[high rock]

same

esspecialy after i took a tumble at my field

[sour mango]

@high rock

[high rock]

?

whats up?

[sour mango]

the pic

[high rock]

ooo

i was looking into a magnified optic like that

i just have a magnifier but its kinda aids

is it worth?

[sour mango]

13.5 inch upper alone by itself and bolt carrier group is over 1k

[high rock]

my god

she is pretty

[sour mango]

its pretty much premium of airsoft

[high rock]

after this raid

ill send a picture

i just recently finsed my m4 for now. but there is still some changes needed

*finished

[limber flame]

HSGI TACO's and G-code scorpion's are generally solid picks for ak mags

can get repros pretty much anywhere

theyre all "good enough"

[high rock]

thanks

[limber flame]

cant exactly go wrong with cloth and bungee

[elder anchor]

The Unity mount has back up irons built in

[limber flame]

take the rear iron off

you can take the front out of the unity

use as traditional irons

just a bit further out

you get a near full sight radius

[elder anchor]

And just run a flip up frontiron backwards over the can

If you’re worried about space

Rear iron takes up no space anyway as it goes over the pic less space over the charging Handel but for the sake of your argument we will ignore that

The unity front iron combo is legit I can confirm

But fixed irons are not a bad aesthetic

Not a Dbal fan however

[limber flame]

DBAL only looks good on PDW's tbf

because its not absurdly wide

[elder anchor]

Depends which Dbal too

I’ve got a soft spot for certain holosun IR shit

And the Russian stuff can be kinda funky, I’m a good way tho

[limber flame]

perst 4 looks pretty good

[honest meadow]

use ak specific mag pouches or just get the fast mag pouches with the strechy plastic and shockcord combo and u will be fin

[sour mango]

i know but they are hard to see through

[honest meadow]

only in 13 inch

i like the dbal but that skelly grip on the 13.5 looks a bit goofy ngl

[elder anchor]

Agreed

Very good funky

[sour mango]

I'm already looking for different one, as it was the only one i had on hand

[elder anchor]

I just noticed

Where tf are your turret caps

[sour mango]

lost em last week 😄

[elder anchor]

Poor guy

Rip turret caps

[sour mango]

I'm replacing a scope anyways with vortex strike eagle

@elder anchor would love a Vortex Razor but those start at like 1500+

[elder anchor]

The razor gen 2 is one of the best out there

Certainly not airshod stuff

My LPVOs have done me wonders to say they’re vector optics

Vector optics prolly best performance/cost optics relative to airsoft

[honest meadow]

u might like these on a longer barrel gives a nice angle to ur wrist but idk if thats an issue u have with your wrist injury u said u have

[sour mango]

already looking into bcm foregirp, they're not expensive

[honest meadow]

ah nice

bcm's r real nice and look prtty cool if u cut them

[sour mango]

i could never do that x.x

[honest meadow]

like @elder anchor

[sour mango]

its handy enough how I can install real steel buffer, real steel rails, etc on my gbls

[honest meadow]

does the gbls have real spec threads?

for ur handguard and buffer toob?

[sour mango]

you can buy adapter to use real steel rails

but not sure tbh

[sour mango]

I know that it can accept quite a few real steel parts

Know of someone who has real steel buffer in his

[honest meadow]

if u buy that then ur good for handguards

[honest meadow]

ask him if he had to do anything to make it fit

[sour mango]

it fits right in

I have 20lbs spring that goes right in

[honest meadow]

but tbh i dont really see any benefit of putting a rs buffer tube on it but u do u

[sour mango]

I don't have it in, it just increases recoil impulse

[honest meadow]

then u should be good if u buy the same one but if that one fits then others most likely will

[sour mango]

I know that GBLS has high torque motor that I might invest into

faster cycling rate etc

@honest meadowhttps://www.longbowbb.co.uk/product-page/gbls-das-steel-bcg already have this bad boy inside

[honest meadow]

nice

( i have no knowledge on the gbls except for that it is cool )

[sour mango]

its like GBBR but electric

[honest meadow]

ik roughly how it works but that really it

[honest meadow]

ik that much but anything else idrk

havent rlly looked into it cause its like 1k

[sour mango]

gears are not even standard on it as far as I know

same with motor

I got mine for £660 with 10 mags like year and a half ago

[honest meadow]

yea seems like somthing where all the parts are exclusive

[sour mango]

I have tm ngrs m4 all upgraded that honestly now barely gets any use

[honest meadow]

cheap asf holy their value bundle is like 1400

[honest meadow]

ill take it off ur hands for 3 dabloons

ands its bronze ok 5 dabloons

[sour mango]

its cerakoted

[honest meadow]

i love bronze ar's theyre so sxy

[honest meadow]

even better

[sour mango]

Midnight Bronze, and bits like charging handle, fire selector, mag catch, bolt catch, iron sights, etc are cerakoted in black

all Trademarks are cerakoted in black

got hi capa to match it 😄

[honest meadow]

how much was it cus i want one now

like a budget sand viper

[sour mango]

got it in trade, then replaced all internals, including gearbox shell

[honest meadow]

damn nice

what did u exchange

[sour mango]

it has:
Gate Titan Advanced
Prommy gears
Prommy pistol/piston head
prommy cylinder head
MagicBox air nozzle
Prommy cylinder

Original tappet plate and tappet plate spring

Have Angry Gun recoil kit in it

and that recoil kit alone is rare and can't be bought anymore

[honest meadow]

nice

how much was all that

[sour mango]

got brushless motor in it too

gun alone without any accessories

like 900

[honest meadow]

fuck me alr i dont have that much thatll be for future me to build haha

snappy

[sour mango]

all you hear is piston hitting cylinder head, thats it

@honest meadowbit of custom hi capa

[honest meadow]

i like hi-capas but APS Stechkin my beloved

[sour mango]

i built that from ground up

not a single stock part in it

[sour mango]

my main pistol is tm fnx45

only changed hop rubber and hop nub

rest is stock

can easily hit 45m+

[honest meadow]

i really like those but the mags r rlly exspensive

[sour mango]

tell me about it 😄

[crystal rover]

I caved in and bought a dye mask

[frozen raven]

i pray they make an airsoft APS/APB one day

[arctic kayak]

French?@flat quail

[flat quail]

american but play on asian or west coast servers

@arctic kayak

live in japan @arctic kayak

[arctic kayak]

okey

[vague thunder]

GreatValueChad in his prime.

[limber flame]

lancer

magnified optic

tiny mag

quad stack in the stock

one point sling

[frozen raven]

Amazon basics “rifle scope”

[limber flame]

yup
its r/airsoft time

[sour mango]

no offence but talk about the struggle to look down the scope when you have lower face mask on

😄

[limber flame]

using lower 1/3 cowitness optics with a mask on already sucks

never mind that

thats below absolute cowitness lmao

atleast its not bridged ig

[sour mango]

and thats why I got decent scope mount that can be used with lower face mask etc

[honest meadow]

they are thats the vfc aps

[frozen raven]

👀

Why is this not a huge deal?

[honest meadow]

i dont think alot of ppl care about the aps ngl

especially with the reputation gbb makarovs have

[frozen raven]

Big sex

[honest meadow]

no release date or anything at least that i have found with my 2 whole google searches

[frozen raven]

The spokesman just said “next year”

At least in this vid

https://youtu.be/Zj_mruxnVEs

[slate jay]

Mikhail forgive me for i have ruined 3 more ak's

[slate leaf]

Looks good dude

Especially that 74u

Tac boi

[frozen raven]

hit it witht he LCT slim grip/motor

[slate jay]

full sized motor

[frozen raven]

: (

[slate jay]

found sum sketch ask website that sels rk pistolgrips

for full size motors

had to do some work to make em fit nicely tho

[frozen raven]

the LCT slim RK-3 is sold out : (

[slate jay]

https://www.ehobbyasia.com/products/asura-dynamics-rk-3-ak-pistol-grip-for-aeg
eHobbyAsia this fits on full sized motors

[frozen raven]

I can’t use the full size grips now, they feel so goofy

[slate jay]

small hands 🥹 ?

[limber flame]

[frozen raven]

No it’s that the airsoft AK grips are comically large

[slate jay]

to be fair i prefer it that way

[frozen raven]

Also I think they look silly

[slate jay]

silly little grip for a silly little guy

[frozen raven]

This is my E&L it has the slim grips

I have a bunch of tactical garbage for it that I don’t have on it right now

Trinkets

[slate jay]

good looking muzzel what brand

the cyma one sucks cheap potmetal garbage

[honest meadow]

5ku and lct make nice supressors

[frozen raven]

All the attachments are LCT tho they are a bit pricey

[honest meadow]

5ku is bassicly just cheaper and a bit shitter qual

[frozen raven]

Bruh that think weighs like 2 pounds alone

[honest meadow]

ik i have a lct putnik

[honest meadow]

and lemme tell u the putnik is chonky

[frozen raven]

Like why

Why must you fill it with solid metal

Why doesn’t it have a muzzle detent and why is it two separate pieces

[honest meadow]

atleast the tracer lines its self up prtty much in ur the putnik i have to use a screwdriver to make sure everything isd lined up cause i have filled the barrel to the hopup with bbs mashed together cause it was "baffle" striking the tracer

[frozen raven]

It doesn’t have a tracer💀

[honest meadow]

yea but if u put one in

the putnik i have a i just put a at-2000 in it

[frozen raven]

There’s no space for a tracer unit lol in mine just a crappy barrel extension

[honest meadow]

bruh ]

[frozen raven]

Big sad

[honest meadow]

its like my friend he got the a&k vector clone just for the looks and the suppressor it had covers a massive inner barrel and is solid steel or aluminium ir smth cause it weighs like half the gun

[slate jay]

dam yal need tracers just use a nvg ir lazer combo

[frozen raven]

Other E&L and the aks74 with the tactical shit on it

[honest meadow]

would if i could but i dont have a cool couple grand laying around

[slate jay]

that is a joke calm down

[frozen raven]

Got them TWI Molot stendos

[honest meadow]

im gonna get some in plum or a lct drum dont know which yet

[slate jay]

Fake lite gang

[frozen raven]

I had to remove thickness from the front lug with a file to get them to fit with my E&L

[honest meadow]

ik u have to do that

[frozen raven]

They are super thick for some reason

[honest meadow]

one thing i dont get tho is why my steel E&L molot mag has a plastic lip and locking lug on the mag like why not just make it metal too

[frozen raven]

What brand mag is that, haven’t been able to find smooth sided brown mags that fit E&Ls yet

[frozen raven]

Their mag design is weird

[slate jay]

idk bout this one but i mostly use lct midcaps

[frozen raven]

I’ve used mag mags before but they are weirdly small

[slate jay]

mine all fit flush

[frozen raven]

No like they are smaller

[slate jay]

hu wtf

[frozen raven]

They seem scaled down for some reason

I’ve been thinking about getting a WE makarov

[slate jay]

i have one

[frozen raven]

How is it?

[slate jay]

they ok

dont expect any range tho

[frozen raven]

Lol

[slate jay]

barrle length is short

[frozen raven]

I was thinking about getting a WE TT33 or a mak

[frozen raven]

Little fella

[honest meadow]

Just got the drippy camelbak thermobak 3l from the guy selling a £50-80 piece of kit new for £16

[elder anchor]

quick social experiment

how many people actually out here doing shit like this

like, ever

[honest meadow]

would if i could but i live in the suburbs of a city so i would have to be out in the street or atleast in view of ppl so id probably get gunned down within 15 mins

[elder anchor]

nice little enclosed car park area is a blessing

neighbors are well aware of the RIFs

so im chilling with this shit

[honest meadow]

yea living in the countryside is nice for doing stuff like that

[elder anchor]

nah its just a little area in the "suburbs" thats closed off next to my house

its just finding places like that thats hard

[midnight field]

horse trailer to?

[honest meadow]

still thats lucky to find in the uk

[honest meadow]

?

[elder anchor]

absolutely

[slate jay]

yes but in my own house more like actual sqb doorways hallways fatal funnels

[frozen raven]

I would get wasted by the police lol

[slate jay]

or go to sum milsim event https://cdn.discordapp.com/attachments/605140076825018378/1105129034439991396/IMG-20230506-WA0005.jpg fun to

https://cdn.discordapp.com/attachments/605140076825018378/1105129033315909702/IMG_20230506_121335_942.jpg

[elder anchor]

house gets repetitive after a while

can only train the same angles so many times

[slate jay]

close a door new map

move the coutch

new map

placs opsticals

its about learning to move not knowing a places layout

lurn to 180 quickly whith a rifle that typa stuff

what feels more comfortable high ready or low ready is also a big thing people forget

[limber flame]

NY

[frozen raven]

Can’t find 11x14 dummy plates, might have to go for the Chinese “strike face” plate

[limber flame]

why would you get 11x14?

large?

[frozen raven]

I am a large lad

[limber flame]

i love how it will protect against M2, a whole AK and M80

like theyre gonna throw an ak at it

[frozen raven]

They have videos of the sweatshop they make these in 💀

There is like 300 of them on a pallet

[limber flame]

💀

[frozen raven]

Bruh

[crystal rover]

I would not trust that lol

[eternal surge]

the boys

[crystal rover]

I have a roast for each person there but imma save it

[eternal surge]

lemme hear it so i can tell em

[river bison]

BEHOLD

@elder anchor

[river bison]

Holy shit is that Sam Hyde

[crystal rover]

Pog

[frozen raven]

im sure that these are 100% legit and totally stop M2AP

[river bison]

Im kinda torn on the optic

Duno if I should use something else or what

[slate leaf]

What engine did you use ???

Ive been looking to make an hpa mp7

[slate leaf]

BEHOLD. MY INHERITANCE GONE

[river bison]

Bullgear HPA engine

https://bullgear.net/index.php?route=product/product&product_id=468

It has a built it tracer on it

I should get tracer bb’s lol

[slate leaf]

Dope

thanks

[slate leaf]

Don't get tracer bbs

[river bison]

?

[slate leaf]

Why not lmao

Nothing wrong with tracers if your indoor or play night games

[slate leaf]

That's why

Tracer bbs are only good good for super dark indoor games where everyone is using flashlights.

Or night games outdoors where the super hardcore boys are wearing nods

They look really cool and they're a neat novelty but they're kind of expensive and they always don't fly super straight.

The biggest factor is that tracers point both ways you're essentially putting a laser beam on yourself

By all means get them if there's something you're interested in or you wanna look cool but practicality wise there's not that great

[slate leaf]

that's a terrible argument as to why you shouldn't by tracers

[slate leaf]

You're a terrible argument

I'm just pointing out the facts of practicality. Obviously do whatever you want. Just a good idea to look at the whole package and not just the pros.

I run an m203 which is a big meme for the most part but I do it because I love it. That's the nature of this sport.

[river bison]

I like mixing tracers

Haha

Also

I play with nods as well

[crystal rover]

Imma build another m4, but imma make it a shell till I can drop a hpa engine in it

[crystal rover]

Pog

[slate leaf]

Nevermind bro is a gigga chad

[river bison]

Lmao you must be new here

[slate leaf]

New to this channel ye

[slate leaf]

You run an m203 hehehehaw

I have something for you if your into 3d printing

My buddy made the design give me 5 min and ill send it in this chat

https://www.printables.com/model/463077-airsoft-blunderbuss-m203-kit

blunderbussy

Lol I saw that on the subreddit

Here's the front of my mk18

I'm trying to figure out what optic I want

eotech

as the founding fathers intended

Eokek

Ideally I'll get a specter DR

But the gen 3 repos are so stupid expensive

[prisma rapids]

best m4 AEG at a good price? i shoot real steel but it’s getting expensive so airsoft is the next best thing. lmk

[slate leaf]

Back in my day it was a g&g wombat machine

No idea what it is now

[prisma rapids]

i was looking into matrix, or g&g. both at good price ranges and full metal. but i don’t want something that’s gonna shit on me when i go to use it

[slate leaf]

CYMA Platinum

hands down

Performance out of the box is the best it gets

the only down side is that you will have to get the mosfet replaced very soon after getting it

[rugged salmon]

eh my mosfet in my platinum mk47 has been doin fine so far ive had it for about 6-8 months now and have ran around 7-8k bbs through it

iprob just got lucky

[slate leaf]

You absolutley did

Ive seen cases where people have gotten them through a year but it varies ive also seen them get broken after 1-2 weeks

so its entirely up to the gun for when it wants to break

[prisma rapids]

how much would that be? or just upgrade from the start?

[rugged salmon]

lol yeah prob gotta get a new bucking tho my gun aint holdin up too wel at farther ranges

atleast not up to the standard

[slate leaf]

i dont remember let me go back and check

i think it was only like 70 bucks or something

and if you arent skilled enough to install it maybe another $20 to get someone to tech it for you

[prisma rapids]

yea i can prolly get someone to do it. i used to fw this chick n her dad owns a airsoft shop lmao

[slate leaf]

If you're looking for real steel training in airsoft form I'd just go ahead and get a Gbbr