airsoft

[river bison]

So he can reflect

Lol

[elder anchor]

I bet they were doing some dumbass shit that caused them to tumble as well

[river bison]

Not wearing boots

[elder anchor]

Definitely wasn’t an honest accident

[river bison]

Is one

When you are trying to traverse uneven terrain you want good footwear

[elder anchor]

It’s like people want fucked ankles lol

And wet feet

I don’t get it

[river bison]

Doesn’t even have to be combat boots, as long as it’s not low cut shoes without ankle support

Fuck you can play in cowboy boots and timbs for all I care

[elder anchor]

They do it to themselves

People (airsofters) work in weird ways

[river bison]

I wanna play this week so bad but I’m working the whole weekend for best ranger competition

This sucks

[elder anchor]

I’ve not played in a fair few months now

[river bison]

I wanna put my scar sc to the test at the kill house

[elder anchor]

The scar looks like a fucking powerhouse

[river bison]

I’m guilty of overusing my fucking vector GBB

Because it’s so simple to use and it’s powerful even subjoules

That and I can’t resist the temptation of going full auto with a 2.5k round drum mag

[elder anchor]

Why wouldn’t you

[river bison]

I barely got to use my other SMG’s and my rifles because of the vector

The recoil and power is just hard to resist

[elder anchor]

Don’t you have the GBB scar H?

[frozen garden]

Airsoft nerds

[elder anchor]

Ew

Mike

[river bison]

@elder anchor I actually do

[elder anchor]

Have you used that much?

[elder anchor]

Not sure about that noise

[river bison]

No because it’s still cold

[elder anchor]

Gahdamn

[river bison]

The strike industries blast shield makes it louder

And redlines HPA systems always sound like a plunger when dry fired

[elder anchor]

Does sound like a plunger

Very intense valve noise

[river bison]

I guess it doesn’t help it doesn’t have the dust cover on and it’s indoors

[elder anchor]

I mean

Bottom line is it sounds better than an AEG

[river bison]

Lol it was an EBB

The recoil was awesome but it was heavier

I stripped out the recoil system so now it’s 25% lighter

[elder anchor]

Was it worth it?

[river bison]

For me yes

[elder anchor]

Fair

Would it even have been possible to keep the blowback function with HPA?

[river bison]

No

[honest meadow]

nah its connected to the piston aint it

[river bison]

Yeah it’s connected to the piston in this case the recoil system is above the GB

Lol for some reason discord doesn’t wanna upload pictures

Just chronoed this thing and oof I think I jacked it up too high at 1.7 joules

[elder anchor]

That would have been cool if it was possible

[quartz gorge]

Izurumi, you have a few hpa guns right?

If you do what engines can you recommend?

I want to convert a gun but I don't know what engine to pick. I'm thinking to buy a Gate Pulsar or a P* F2.

[river bison]

I have more than a few, what kind of gun are you planning to use

[quartz gorge]

Carbine

Vfc avalon samurai edge

[river bison]

F2 is good, I don’t have experience with the gate pulsar so I can’t say

Personally I would get a kythera or a redline if you aren’t planning on doing auto + sub joules

[quartz gorge]

I mainly play woodland so I'd like to have auto. The reason I ask about the pulsar is there is almost no info about the engine

[river bison]

F2 would require a battery as well

The pulsar is fairly new and it’s abit obscure atm

[quartz gorge]

Okay, thanks for the info

[quartz gorge]

I found a reddit post of a quick comparison of some hpa units.
The pulsar is also listed there.

https://www.reddit.com/r/airsoft/comments/10zrv57/hpa_engine_size_comparison_f2_pulsar_inferno/

[haughty drift]

pls tell me how do i get one

[limber flame]

with money

[smoky socket]

https://cdn.discordapp.com/attachments/484151915479826432/1095942240871919667/20230412_2049452.mp4

[little patrol]

ew youre wrong handed

[smoky socket]

Too bad cry about it.

Picked this up yesterday

[river bison]

I feel bad for not using this more, I literally just used some parts I had left over to build it and threw a kythera on it

I didn’t expect it to function super well especially when it came to range

@smoky socket are you an actual medic?

[smoky socket]

yes & no I have training but not officially a medic

[river bison]

Ah emt?

I can’t tell, a lot of people call themselves medic but it can either be an EMT/Paramedic/Combat medic etc

I fall in the latter category and Paramedic in terms of training

[smoky socket]

thnking about it. I know enough to stop someone from bleeding out.

the origins of my name is pretty funny tho, came from Team fortress 2 being a medic main * during christmas I made my profile festive and called myself fathermedic (father christmas/father saint nick) & the name kinda just stuck.

[river bison]

Oh gotcha

Damn I thought I met another one of my kind

Haha

I’m a combat medic lol so I get excited when I meet others especially when they play airsoft

[smoky socket]

I'm honestly considering joining the reserves here i ncanada and get that training

[river bison]

Go for it it translates well on the private sector

A lot of combat medics here come out of the military to be nurses/doctors/PA’s etc

[smoky socket]

I'm waiting on my work to give me my first aid course, but they keep stalling

[river bison]

Medical jobs are always good for stacking up that dough

[smoky socket]

mhm

[river bison]

For more airsoft shit

Haha

[smoky socket]

I'm not squimish when it comes to alot of things, only things that get to me are nails & eyes

[smoky socket]

yes

[river bison]

For me it’s intestines

So my first time seeing and dealing with an evisceration in person I had to suck it up haha

[smoky socket]

I've helped butcher deer moose ect, so punctured guts isn't too bad anymore

[honest meadow]

me to i hate shit like in horror movies when they peel the nails back or like a drill to the eye and stuff like that

always feels like its happening to9 me to

[smoky socket]

Insert dead space needle scene

Got all of it to fit in my case

[rapid wolf]

dead space needle dead space needle dead space needle dead space needle dead space needle

[honest meadow]

the voices get louder every day

[low umbra]

that's a cool case

[rapid wolf]

[smoky socket]

ty

[crystal rover]

I figured out what my next fit is gonna be

This shit with khaki pants

[limber flame]

aussie construction fit

[crystal rover]

FAT FAX

[limber flame]

L tbh

again

L

tbh

get yo bread up gamer

[crystal rover]

i mean a starter rifle in reality is like

150

[humble token]

and who says you need a rifle per say

could always just use a 2 liter bottle with an airhose and a nozzle

you see DIY guys run taht shit all the time as a meme

[limber flame]

im gonna guess

queensland?

[crystal rover]

queensland sert

some mf showed up in construction shit

[limber flame]

thought so

queens is always a lil silly

[crystal rover]

normal they us amcu/auscam

but 1 mf

decide

fuck it we ball

so fuck it we ball new airsoft kit

i just need tan pc, and tan helmet to put it together

[crystal rover]

mid build

[limber flame]

tarkob drip when

[smoky socket]

buy a rubber knife and run around like a crazed maniac, honestly it's quiet fun and you can get some pretty funny moments sneaking up on peeps. Last week I flanked a team compressed mostly of rentals & knifed them all.

[humble token]

or like 30 bucks for a springer

[elder anchor]

Get some disposable income bitchass

[dry hound]

VSS Vintorez new meta?

[elder anchor]

What

[dry hound]

Its a vss but modified for speedsofting and larping

Like extra larping

[elder anchor]

That’s not a VSS

And you don’t know what larping is

[dry hound]

Well cause I dont larp

[elder anchor]

Lemme guess

You think Larp is cringe and stupid and you hate it

That speedsoft M4 is cringe and stupid and I hate it

[dry hound]

I dont really hate it I dont like people that give themselfes a rank and act like they know everything

[elder anchor]

And what do you think about people people who don’t assign themselves a rank and think they know everything but use real gear in an airsoft setting?

[dry hound]

If they use real armor and all of that not a problem at all,its kinda cool

Nothing really much to say

[elder anchor]

Very cool

Just remember

Larping is the opposite of speedsoft

[dry hound]

Ik

My dad owns a scorpion

Really cool

Its good for airsoft

Also my dads been playing airsoft since like the early 2000

[elder anchor]

He’ll have some nice shit I imagine

Never met someone other than izurumi who likes the scorpion

But he HPAed it so that doesn’t count

Everyone I’ve ever seen with one at my site had been displeased

[glacial drift]

Bros got the drop stock bare bones m4

[dry hound]

I have a story to tell about he shot a girl that thought she was in some action movie she was firing with an lmg on a humvee and she was wearing only glasses and like a helmet and my father shot her directly in the mouth and she fell down in the humvee like in the movies when a guy gets shot.A perfect story on why you should wear the correct protection.Also he was like 10 m away so he was allowed to fire his scorpion according to the games rules

Also he has more guns ak-103 scorpion,sr-25,m700 and more

[elder anchor]

Post guns

[dry hound]

Ill do when i get home

Cause my dad lives in another city

[dry hound]

I might be getting new gear

Cause free of Afghanistan and then they are sold for like 30 US dollars

150 for my currency

[dry hound]

We left it outside we forgot about it all winter

Systema m4 pretty cool

More stuff

[limber flame]

[astral pelican]

Kinda off topic but I've been really getting into airsoft lately. Buying all these armor/rigs and shit. I've been really into military history throughout my whole life, dad's in the military, but I'm already getting my degree in software development. Don't want to regret any decisions when I'm older

[honest meadow]

I mean as long as you buy good quality gear from known brands they won't depreciate am extreme amount for whenever you want to resell

[astral pelican]

No I meant more like I want to join the military but not sure if I should since I'm already on a good path in life

I don't give a shit about the cost of these things

[honest meadow]

just see how it goes with ur life and if u feel that u have a calling to join join

[honest meadow]

just gotta be prepared to be fucked over after u leave

and be in pain for the rest of your life

[low umbra]

no

that's what the military does they sell you this exact thought

it's never worth it never

[queen pendant]

Unless you are drafted don't join the military

[astral pelican]

Guess I'll stick to larping👍

[honest meadow]

Or if ur life is going down an extremely dark Path

I saw that

That's when the voices get to loud

[rapid wolf]

dead space needle dead space needle dead space needle dead space needle dead space needle

are there any good mk18 handguards i should be looking for

[honest meadow]

Madbull

[rapid wolf]

i want to get a 9.5in inner and outer barrel and handguard for a new gun

ty

https://www.evike.com/products/37050/

is this the right one

[dry hound]

Scorpion is fire

[elder anchor]

Have you ever been in the military

[queen pendant]

No but I have a lot of military friends and the biggest advice they give me is if you have to ask if you want to join the military then you shouldn't join the military

[elder anchor]

That’s what people who amount to nothing in the military will tell you

[honest meadow]

yea

u can get it in bronze too

[dry hound]

Cooking in military gear for no reason

Delecious

[honest meadow]

i too am a meat enjoyer

[dry hound]

Honestly really good

[honest meadow]

yea looks rlly good

[limber flame]

cooking in da osprey drip fo today

[low umbra]

that looks so good

[dry hound]

This is for my vest like protection on the arms

Also no plates so it dont look good

[dry hound]

From 40-50m ish away with a pistol

The shiny one

M1911

I might have got the name wrong

[honest meadow]

just get some cardboard

[dry hound]

Meh well sponges will work better

There are like 6cm ones i can buy like not the normal sponge its a bit different

[honest meadow]

nah a piece of wood

[dry hound]

Nah metal

Cut out metal so simple

[honest meadow]

i mean if u get some high density some then yea

[dry hound]

Heres something stupid

[honest meadow]

yea probs not the best idea incase ur fucking mag detonates

[dry hound]

My friend burned his han

Hand

Like extra gas

His whole arm burned but hes alright

Also because he reacted he fire 3 times more

Causing more gas to go out

I think i posted this one before

[dry hound]

Its like 9:46PM and i have been shooting this since like 6:00PM

The barrel is literally rotting on the inside

[honest meadow]

wtf

[dry hound]

Me and my father did a lil oopsie and left it all winter outside

But it shoots just fone

I mean we had to taks out the insides of the suppressor

[honest meadow]

how did u leave it outside tho?

[dry hound]

Shoots a little bit to the right but i ain't spending my time zeroing

[dry hound]

Idk just happened

[dry hound]

Cause when i change the barrel or i clean it will shoot completly in a another direction

[honest meadow]

yea

[dry hound]

Been shooting at the green gas

This img is like from 1-× hours ago

[honest meadow]

is the bottle full?????

[dry hound]

Nah

Its like almost emty

Also we burnt some wasp hives by turning the gas into liquid

And then lighting it on fire

Also

Might shoot from the rooftop

At a another target

If my dad allows me to get on the roof

I bee hearing stuff

Be

[dry hound]

The bottle is alright

Canister whatever you call it

Also because my brother isint the brightest in the head he shot my phone with the m700,it was in my pocket soo my camera is fucked

Like the 0.5 zoom

[honest meadow]

ye but does it have gas in it?

cause if so that was a prtty dumb idea incase it grenades itself in future or when u were hitting it

[dry hound]

It does cuh!!

It 43 wont pen tho

So we good and if it grenades it self it would look cool

[honest meadow]

just make sure to keep it cold all the time now cause the structure of the can is compromised

[honest meadow]

going to hospital with shrapnel wounds aint to fun tho

[dry hound]

I am like 20-25 m away

[honest meadow]

ik but from now on

[dry hound]

Or even 30 also i had worst reason i went to the hospital

[honest meadow]

it is more likely to grenade now

[dry hound]

Ong its gonna be like in tarkoc when the sharpnel goes all around the place

[honest meadow]

still just be rlly careful with it now just incase it does

[dry hound]

Okay

Thanks

All the bbs

Im running out of bbs

Almost 1000 gone

[lilac arrow]

thought about recording some Umarex Glock 17 footage and sending it here but I realized that it broke after two days of having it (for example slide didn't lock after the last bb) and then it even started to fall apart for no reason

lmao

[dry hound]

Prob it was cheap idk

[lilac arrow]

nope dude

[dry hound]

Most of my pistols are tokyo marui

[lilac arrow]

bro it was not cheap at all

I wasted my money

[dry hound]

Scammed!!

[lilac arrow]

it was like 200+ euro

I could buy around 6 Tarkovs with that money

[dry hound]

1984

[dry hound]

Damn

[crystal rover]

Wait, on the box did it say umarex of elite force

[lilac arrow]

Umarex

isn't it the same thing

[crystal rover]

Major oof

Yes but no

[lilac arrow]

what does that mean?

[crystal rover]

Elite force has better qc

And are most of the time cheaper

The whole ef/um thing is more or less part compatibility

[limber flame]

umarex and elite force are licence holders

[lilac arrow]

I couldn't find elite force offers in my country

[crystal rover]

Oof

[limber flame]

umarex licences KWA, VFC and i think one other

[lilac arrow]

and also has anyone got any idea why the slide lock could have broken?

[crystal rover]

Mag

[lilac arrow]

what about it?

[crystal rover]

it has a little numb the pushes up the bar on the last bb

if it gets flattened or breaks

[dry hound]

This was like 50dollars hella fun,exploded in my hand

[lilac arrow]

so I could have just bought a new mag but my friend instead decided to spray wd-40 to the insides of the pistol and then it started falling apart

[dry hound]

Also idk why my hand was so shaky

[crystal rover]

Oh, yeah that would explain it

[lilac arrow]

nothing to restore now

[crystal rover]

Never use wd-40 on a gun or replica

[lilac arrow]

I didn't really want to

[crystal rover]

That cost 50?

Wtf

[lilac arrow]

that sucks I should not have trusted him with that

[crystal rover]

Slap your friend some common sense

[dry hound]

80 i did the math wronf when i changed currency

Also like 11 pm still shooting the m700

Firee🔥🔥

[crystal rover]

I mean, how did it cost that much

Was it teh gun?

[dry hound]

Also charging my phone

[crystal rover]

Huh

[lilac arrow]

I guess that I won't even buy airsoft anymore because my friends will beg me to give the airsoft gun to them, then they'll shoot the hell out out of it, dry fire, it and they will break it again

or something will break after a few days again

[crystal rover]

Just don’t let someone tell you to do something u less they are knowledgeable

Consult discord

Or Reddit

I have had alot of things break

That never stopped me

[limber flame]

dont consult reddit
theyre fucking morons

[crystal rover]

Most of em ye

[stiff wadi]

anyone here done an AGM mg42 build before
looking for suggestions on upgrades

[dry hound]

I wanna get on the roof and start shootong but I dont wanna ask my dad

[dry hound]

Personally didnt also dont know anybody who has dl e a mg42 build

[lilac arrow]

But why does even wd-40 break stuff in the gun?

isn't it supposed to clean or something like that? I knew that I should not use it but never clearly knew why

[dry hound]

Not sure if you should use wd -40

[crystal rover]

Wd-40 is used to remove the rust from bolts to help remove them

[dry hound]

I got like some special stuff to clean the gjns

Guns

[crystal rover]

You want to use silicone oil

[limber flame]

the two things you should be using on gas airsoft guns is silicone oil and silicone/PTFE grease

[crystal rover]

Yes

[limber flame]

anything else has the chance of being a solvent

and damaging the gun

since most stuff for real guns is designed to clean them aswell

breaks up all the shit

[lilac arrow]

I'm just gonna put away some money for a new pistol. What brand is good?

and stuff won't break after two days from them

[crystal rover]

Tm, ef, aa, we tech

[limber flame]

we tech for their glocks

most of their other stuf is ehh at best

[dry hound]

Tokyo marui but they be expensive,well at least in my currency

[lilac arrow]

I had wanted to buy the Glock from them but it was not available in my country

so I decided to get the umarex one which is nearly 2 times more expensive

[stiff wadi]

WE 1911 are good
had mine for about 10 years now

[crystal rover]

Buy second hand then

[lilac arrow]

is green gas or co2 better?

[limber flame]

green gas

[round parcel]

Got my loadout ready for home field airsoft opener tomorrow!

[dry hound]

The type of vest my brother wants

[round parcel]

@dry hound Amazon!

[dry hound]

Thanksb

But aint buying it fr him☝️☝️☝️

[dry hound]

Bad idea to shoot st jight they got the neighbour's here

Also the policd might be soon

Its over

[quartz torrent]

Killa photoshoot

[dry hound]

Fire tribe type

amazing music 1 am

Its because its thanksgiving

[crystal rover]

Your at ballahack Airsoft

[dry hound]

My leg be feeling numb after i but gas on my thigh

Also almost 2 am

[low umbra]

[quartz torrent]

I am

[elder anchor]

Put some shit in your armour

[quartz torrent]

I stuffed it with cardboard lol

[dry hound]

Happy easter!

[stoic night]

Fit check

[dry hound]

Awooga booga gas freeze my hand

[stoic night]

Friend threw a grenade in my backyard

[lyric matrix]

whats peoples opinions with cat ears on helmets?

[dry hound]

Cool I guess

Time*

[humble token]

keymod

[glacial drift]

Dickmod

[normal zinc]

Weird question but is there a site where I can create a build of a certain gun?

don't know anything about airsoft but was looking to possoibly get a show peice gun

[marsh haven]

Slender hand

[old latch]

Cat ears = drip
Pink is best

[dry hound]

So true

[haughty fable]

anyone who has strong opinions on cat ears shouldn't be taken seriously

[lyric matrix]

Good to hear

[cerulean minnow]

Airsoft today was very fun :>

[lilac arrow]

What are the best airsoft brands? I'd like to buy a Glock but this time not from Umarex (slide stopped locking after one or two days)

Oh yeah I remember people saying WE Glock is good, is it though?

[elder anchor]

does "cringe" count?

[limber flame]

being deliberately cringe is based

[crystal rover]

If people say we tech is good

Trust them

[zealous blaze]

your dignity lowers point by point everytime yu get killed by one

[cerulean minnow]

cyma is good for starting

tokio marui is kinda reliable and common

Cyma ofcourse for primary gun, not secondary

[old latch]

They also annoy hyper heterosexual dudes which is always fun

[lilac arrow]

Alright

[lilac arrow]

Well it really seems like it's good but I can't find any place to buy it from. There's one but it's out of stock. I can only find Umarex Glocks and I'm not gonna get one again

[cerulean minnow]

I'm asuming you are from US?

cause i don't know many US brands

im from spain here so xd

[lilac arrow]

no

I'm from Europe

[elder anchor]

maybe

[elder anchor]

TM is premium and from what i hear very good

[lilac arrow]

can't find any

[honest meadow]

idk i normally test out how my gun would look with certain attachments by building it in tarky

[elder anchor]

tokyo marui

[honest meadow]

idk i think its prty cringe but u do u i aint gonna stop u

[lilac arrow]

found it

but they're all either gen 3 or 4, I'd prefer gen 5

[limber flame]

theyre making a gen 5

at some point

same with MOS slides

dont know when theyre gonna release but theyre making em

[limber flame]

definitely

[lilac arrow]

Well, I'd consider getting a Gen 4 but dang

people say they have plastic slides

[limber flame]

they do

but its not shitty plastic

makes em really snappy and they perform great in winter

[lilac arrow]

But is there even a difference between the generations of Glocks in airsoft?

[limber flame]

uhhh
kinda
not really

[lilac arrow]

they look a bit different, but do they perform any different?

[limber flame]

all i know is that the gen 3 TM glocks have an outdated cylinder and arent real spec (slightly wider)

barring the gen 3 glock 19

every one after that has the improved cylinder which increases felt recoil and reliability

generally the only differences are similar to irl

externals

improved triggers on gen 5's

different recoil springs

[lilac arrow]

How much fps though? Because I'd really enjoy being able to shoot through plastic bottles (my Umarex Glock 17 couldn't do that when it worked)

[limber flame]

a lot of gen 3 parts arent compatible with gen 4's though

[limber flame]

depends on where you are

generally TM glocks shoot around 300fps with .20 bb's

but thats due to japans laws

generally theyre going to be under field limits

which is kinda what you want tbf

just know that you dont want to be using red or black gas with TM pistols

you will blow up the slide

you shouldn't need to use red or black gas anyways

most gas guns should work in near freezing conditions when maintained correctly

https://www.youtube.com/watch?v=p_4PWj-w9R8&t=319s

https://www.youtube.com/watch?v=5JPLe5R8-Ms

[lilac arrow]

Then I guess I'll buy a TM Glock or a WE one depending which one will be available on some airsoft store in my country when I'll have the money

[limber flame]

WE glocks are solid

their gen 5's are good

just dont get a MOS version

[lilac arrow]

What's MOS?

[limber flame]

modular optic System

allows the mounting of red dots

kinda shitty on airsoft glocks due to the nature of how the BBU sits

they need a special one

expensive and uncommon

especially if they break (they do a lot)

[lilac arrow]

Lmao I can't find any sites that sell WE Glocks in my country, they're either out of stock or unavailable for some reason. I can only find these Umarex ones and I won't trust them again.

I found a few WE G19 gen.3/4 offers tho

[limber flame]

go for the gen 4 if you get the chance

[lilac arrow]

found one! Is it in any way worse than the 5th gen ?

[limber flame]

not really

the only difference is externals

thats it

[lilac arrow]

it's WEG19-GEN4

correct one I guess

[limber flame]

yeah that should be good
and the WE glocks are pretty much TM compatible

so if something breaks

its easy enough to get parts for

[stoic night]

Facts 😭

[elder anchor]

WE gen 4s are basically just budget friendly TMs with metal slides

without the performance aspect

[lilac arrow]

What does that mean?

[elder anchor]

TMs are better.

[lilac arrow]

yeah but like they're around 150% the price

well they may be better indeed

[lilac arrow]

But in which way do they perform worse?

just wondering

[dry hound]

It fires really nice

[elder anchor]

TMs have better parts stock

the polymer slide also helps loads with performance

[limber flame]

worst part about TM's is the racking sound

[honest meadow]

if u care that much u can just get an aftermarket one

[limber flame]

yeah ik

aftermarket slides that aren't pot metal or steel are a little spensive though

[dry hound]

@honest meadow it still didnt explode

[honest meadow]

dude seriously if it still has gas in it stop fucking shooting it its a hospital trip that wont be fun

[dry hound]

Nuh uh

These things are made to resist.43 and .30 bbs

[limber flame]

theyre not made to resist anything

theyre made to contain the pressures of green gas

and constantly shooting it will weaken the can

[dry hound]

Also its like empty

[river bison]

I’m starting to lean more towards HPA tapped GBB’s these days

The GBB Vector spoiled me

I need to get a bigger tank

[limber flame]

get a dual tank

or yk

dont get a KWA

so you can actually use it without needing hpa

[dry hound]

Lost a real one😭😭😭

Also a little piece

[limber flame]

welp
it grenaded

so it had pressure

[dry hound]

I used a axe to cut it

Also 3 pieces

Come on

Should have been 2 cant be 3 that look cut

The second one!

New target to shoot until 4 am

[limber flame]

just get a coke can please

[dry hound]

Ran out of cuh

Also

I could get like 1.50 lei per beer

Or it was like 50 bani

Like really shit beer

[humble token]

why do you keep posting cringe

[honest meadow]

it says on his profile that hes from the balkans so every time he posts its at like 2-4 am where he is

[dry hound]

Nah cause

Yestarday

I stayed up until 4 am shooting and then i slept like my grandma till 2PM

And now its midnight

[humble token]

and also buy a bunch of gbb airsoft guns and just shoot cans in their yard

while driving around in toy cars

[rapid wolf]

what inner and outer barrel do u guys recommend for use with the 9.5in madbull mk18 handguard

this is going on a gbbr so idk if that makes any difference

[earnest fulcrum]

i need to know what a good ar platform rifle is and a good glock 17/34 clone is

https://www.evike.com/products/10265/

was looking at this

[honest meadow]

Yea cyma platinum R prtty good for the money

[earnest fulcrum]

what do you run? or what would you run, budget is 300 ish

probably 200 for the pistol

[honest meadow]

I just run a decent evolution airsoft lil shorty 7 inch for my indoor and I gotta say for the money it's really quite good

Pre wired to deans built in programabke mosfet that allows active breaking etc...

Only thing is the majority of their models are polymer body and metal handguards

[earnest fulcrum]

i assume that causes the metal to wear on the plastic

[honest meadow]

I mean there's a tiny lil wear on the reciever but as long as the handguard is on tight and doesn't wobble it'll be fine

But yea all I've rlly done is get a tracer handguard eps stock and max hopup and I have no complaints

[alpine arrow]

Bro had lost a bet. It was that or pay 200

[inner cedar]

@dry hound no memes please

[hybrid vapor]

💀

This is not looking good

[dry hound]

😔

[slate leaf]

Ayresoff

[honest meadow]

How's it not looking good

[hybrid vapor]

the battery has swelled and smoke has started to come out

[lilac arrow]

If I want a good Glock for a more budget price, is WE the best option or are there any other good ones?

[slate leaf]

WE are decent yeah

[low umbra]

goes hard

is this helmet from somewhere or just

just a helmet

[limber flame]

looks like it's from a movie

also tactec bad

[dry hound]

its from

[low umbra]

ah i see

[dry hound]

maze runner 3 also one of those guys in the photo is like a military consultant

[low umbra]

is the rest of the kit also part of it?

ohh that's cool

[dry hound]

also not my photo

[low umbra]

kits in the photo look better than the ones in the movie

[dry hound]

honestly they look a bit to small on them

i like the bigger vests

with deltoid upper protection

[lilac arrow]

Do you think I should care if it's gen 4 or 5

Cuz I kinda prefer 5 but can't find any yet I can find a lot of gen 4 and 3

[slate leaf]

Either or tbh

[lilac arrow]

So it doesn't really matter except the exterior?

And is Gen 5's exterior really better in any way?

[low umbra]

same, exactly

[lilac arrow]

Do you guys think it's worth waiting for some WE Glock Gen 5 or should I get Gen 4?

[elder anchor]

Lotta mid kits being posted atm

[elder anchor]

Gen 4 is pinnacle atm

Gen 5s exist but they have slightly worse parts compatibility

People have been reccomending WE gen 4s forever and a day at this point, excellent beginner pistols with compatibility with TM parts

[lilac arrow]

So gen 4s are the best we glocks?

I'm planning to get a WE G19 Gen 4 but I also se G19 Gen 3 and G17 Gen 4 and Gen 3 offers too

[gray python]

lmao

[elder anchor]

Least mid kit I’ve seen all year

[slate leaf]

What helmet is that? Highcut PASGT?

[limber flame]

looks like a cvc

maybe

[slate leaf]

Western helmets aren't my forte

The harder it is to move in, the better imo

Could I feel anything at all? No.

[limber flame]

redut gaming

[slate leaf]

You know it

Got a Lszh-2DTM on the way with the upgraded assault visor

[tribal tree]

Gentex sohah

Lol

[elder anchor]

wouldn't it be cool if you bought an optic for your AK

[tribal tree]

Pretty Much a converted tanker

[slate leaf]

I have two actuslly, but genuinely don't like using optics, I'm just more comfortable with irons for airshit

It's not like I'm shooting at shit past...60 metres

Besides, Russian Recce teams also seem to have an aversion for optics, it's always hobo kit from the early 00's

[limber flame]

(they cant afford it)

[slate leaf]

Regional FSB Moments

[rapid wolf]

^ still need help with this

gonna be putting on a gbb

[slate leaf]

I'd honestly take it to a local tech, they probably know better than us

[honest meadow]

Just look for gbb outer and inner barrels at 9.5 or 10"

[low umbra]

good rule of thumb yea

[river bison]

Lol fucking maxx hopups are always so finicky

It took me forever to find out why my SCAR H is having feeding issues with the new hopup

Basically needed a good tension spring because the hopup gets stuck and wedged

[elder anchor]

I’ve had a bad experience with my maxx hop

Gonna stay away from now on

[limber flame]

theyre definitely overrated

[rapid wolf]

alr cool

[honest meadow]

Sorry I can't help more just have no clue on what to look for when it comes to gbbs

[elder anchor]

One of the few things I’m gonna listen to neg airsoft on

[warm steppe]

RARE ARMS SR762

[low umbra]

fire edit

[hybrid vapor]

1/3 in progress

[honest meadow]

any kind off look u going for or just a blaster

[hybrid vapor]

i really wanted to doing it a dmr, but my i will finally play blaster with my team

[honest meadow]

yea im looking at a cyma sr-25 cause i really like the look of sr-25's and ima probably buy a second upper so i can run it indoors too with a shorty barrel

[hybrid vapor]

the cyma sr 25 is so fucking awesome, i tried it on a field and i would def buy it for a dmr

[rapid wolf]

allg, this is my first gbbr too so i’m having to look into more things as i’ve never tried swapping out the handguard on my aegs before

[honest meadow]

ya im pretty sure that bc its a gbb the handguard has to have different threads

[rapid wolf]

doesn’t help that the nearest evike to me is about an hour - 1hr15 away and i literally saw an airsoftgi salesman wholeheartedly recommend lancer tactical to a new buyer

but i guess i’ll have to make the trip to evike sometime

[honest meadow]

i mean theyre alr if u get lucky with the lottery but yea

[rapid wolf]

that’s the thing tho u playing slots with qc i heard

[honest meadow]

like i got lucky with my only ever lancer as it was my first but when i opened it up theyd put a fuckton of nasty grease

[rapid wolf]

my elite force glock 19 kinda came like that without the nasty part

was just regular grease that a regular paper towel solved easily

i also wanna get a threaded barrel for it and maybe somehow mount an rmr

so many things to buyyyyyy

[humble token]

just make sure you get the right upper when buying a second one

ar-10 platform is known to have several styles of uppers, and they aren't cross compatible

[honest meadow]

ik id buy a second cyma one

[humble token]

valid

[rapid wolf]

i wonder if they sell lowers too

actually nvm that would be a stupid idea i just went over it in my head

[humble token]

what, to have two separate lowers and two separate uppers?

[rapid wolf]

my dumbass was thinking of putting on the sr25 receiver onto my gbbr handguard and somehow getting my internals into there and i’m glad i stopped myself while thinking about it

genuine braindead moment

[humble token]

technically, if you DIY your own mechanism from scratch

you could have the gbb and aeg specific parts all in the upper

and make it so the trigger mechanism works for either

but that'd be a pain, lol

[limber flame]

what gbbr is it

because to my knowledge
GHK, VFC and Vipertech are RS spec so you can use real handguards with them

TM, WE and lower end manufacturers use AEG spec threads

but for the TM MWS you need to buy a spacer to use other handguards

[lilac arrow]

WE G19 Gen 4 or WE G19X Gen 5? They're the same price

[river bison]

Been thinking of grabbing a WE M4 and using the HPA drum mag someone gave me

[limber flame]

WE m4 bad

will tear itself apart

[river bison]

I was gonna replace the parts with some RA tech stuff

[cerulean minnow]

This is the definition of being the VIP in the gamemode, and being left behind by the escorts, only to be camped by the enemy every 20 seconds that your respawn counter finishes

[river bison]

Lol also speaking of KWA’s tearing itself apart the fucking Vector is indestructible

[cerulean minnow]

also, i find it funny AF

[river bison]

Also the MP7 after the fix

[humble token]

whoops

[dapper elk]

yall are corny speedsoft is life

[cerulean minnow]

not speedsoft

i'm not a cringy ass tryhard

[dapper elk]

your just not good posibly

[cerulean minnow]

i like actually enjoying

[dapper elk]

search up team cuppa army

[cerulean minnow]

just started airsoft 2 months ago man

can't expect me to be a pro that fast

not intend to do so, just having fun and sharing what i enjoy

[humble token]

very manly

[dapper elk]

search up team cuppa army

[void spindle]

grow some arms!

[humble token]

no

[dapper elk]

bro thinks he is him

[cerulean minnow]

that guy needs a chiropractor

[river bison]

Lol that ass is so stuck back it’s waiting for something

[cerulean minnow]

[dapper elk]

buddy thats speedQB

not speedsoft

[limber flame]

shut up

[humble token]

same difference, cringe

[dapper elk]

no its not buddy

[limber flame]

you spelt didn't wrong in yo bio

goofy

[cerulean minnow]

thing is, i don't care about speedsoft or speedqb

[dapper elk]

big man

[limber flame]

stop being a soy boy and shilling your playstyle

aint noone care

let mfs play how they want

[river bison]

Is punching allowed in speedqb?

[dapper elk]

sneako fan

[limber flame]

what

[cerulean minnow]

[dapper elk]

you said soy boy

[limber flame]

yeah

tf that gotta do with sneako?

[humble token]

describes you pretty well so far

[limber flame]

what
because he said it once

[dapper elk]

at least i dont look like this lol

[limber flame]

doesn't make it his word bro

[limber flame]

show yourself then

[humble token]

let the twink pics dispense

[cerulean minnow]

i mean you're not wrong there xDD

[limber flame]

goofy ass stance

"mom said its my turn with the soy milk" lookin ass

[cerulean minnow]

bro is an npc

[dapper elk]

you where thinking long and hard on that one

[cerulean minnow]

he aint wrong tho

[humble token]

found another picture of them

[limber flame]

both playsyles are fine

but when ya shit on one

then youre just an ass

one isnt inherently better than the other

[humble token]

this is the good take

[limber flame]

"oh this is cring, thats cringe"

aint noone give a fuck but you

[humble token]

I think the attitude is cringe

[cerulean minnow]

See, i like the milsim style, but i adapt it to my needs and liking. i like the full on military equipment, but i rather not wear a helmet and wear a cap

[limber flame]

thats what im getting at

[humble token]

is what I will now prescribe to

[cerulean minnow]

as for uniform i haven't bought one yet

[humble token]

and I don't need an excuse to take the piss out of somebody

[dapper elk]

angry goofs

[limber flame]

theres a place for both playstyles
same with paintball

theres speedball
and magfed

generally 2 sides of the spectrum

same case for milsim and speedsoft

its an argument as old as time

[dapper elk]

milsim is corny

[limber flame]

you're corny

[humble token]

very

[limber flame]

being a fuckin complaining ass mf because someone plays different to you

with yo copy paste ass kit

[dapper elk]

why are you so mad?

.

[limber flame]

i aint mad
im right

[humble token]

you're in a tarkov discord

no, correction

you are in THE tarkov discord

[dapper elk]

thanks for telling me i did not know that

[humble token]

I noticed

[nocturne spindle]

🤣

[rapid wolf]

pts radian model 1

[limber flame]

ah
hm

do you know who the OEM is?

[rapid wolf]

kwa i think

[limber flame]

my condolences

[rapid wolf]

it’s based on lm4 i’m pretty sure

why’s that

[limber flame]

oh no

the LM4 is uh

just give me a minute

im gonna get you a list of the issues that LM4's like to have

[rapid wolf]

oki

[limber flame]

so hopefully you know what youre getting into

[elder anchor]

buddy

shut up

buddy

[lilac arrow]

Should I get a WE G19X Gen 5 or WE G19 Gen 4? They're for the same price

[limber flame]

gen 4 if you want parts compatibility

gen 5 if you want the newer model

(they have nicer triggers)

[lilac arrow]

I know they're bit newer but I'm more wondering about the G19 and G19x difference

[limber flame]

the 19x has a full size grip with a 19 length barrel

and slide

[lilac arrow]

Oh alright. Does it work well in your opinion?

Like the 19 barrel with 17 grip

[limber flame]

personally ive never tried it but i do prefer the full size grip

feels a lot better with gloves

the slide is less than inch of difference so its not that much of a difference

[lilac arrow]

Also what do you think about finger grooves in gen 4

Because my friend keeps telling me they're one of the biggest reasons to get a we g19 Gen 4 instead of we G19x Gen 5

[limber flame]

honestly dont mind em

generally finger grooves are ehhhh

because your finger positions change constantly

especially gloved vs ungloved

its all a matter of preference tbf

[lilac arrow]

I'm going to be ungloved I suppose most of the time

[lilac arrow]

But except the finger grooves and blank slide with we gens 5 there isn't any difference?

[limber flame]

probably some internal changes that im not entirely versed on

id probably look that stuff up

[lilac arrow]

I think I'm going with WE G19 Gen 4

G19x is cool but

The barrel and grip don't quite fit it my opinion

[limber flame]

yeah i get that

i feel like the proportions are a little off

[lilac arrow]

Yeah at first glance it seems fine but after looking bit more it's, kinda odd

[limber flame]

a handful of cases

[rapid wolf]

ive experienced problems with mags

dropped it and feed lips broke lol

heavy as a mfer

as for the stock replacement, id like to replace it with an moe carbine or ctr stock, but isnt necessary

would it be possible to somehow stick a milspec buffer tube onto there

and tbh im not looking to get max max max performance with it so i dont mind if it doesnt necessarily perform as well as smth like the mws

also maybe this is a specific problem to me but with the raptor charging handle that was included, the pins that hold in the wings like to move a bit, anything i can do to make em not move anymore

this is especially a problem with the right side as i have to readjust it every few pulls and the right side one maybe every 10 or so

[elder anchor]

post pic

[river bison]

I got replacements from black variable for that

Especially for my KWA vector

[rapid wolf]

ill check it out

[rapid wolf]

itll come out a bit and i have to set it back in

sometimes the one on the right goes down below the hole too

[limber flame]

no

[rapid wolf]

rip

[limber flame]

proprietary buffer toob moment

kwa try not to be shit challenge (impossible)

[rapid wolf]

[limber flame]

it sucks because theyre shilled so fucking hard by youtube

[rapid wolf]

i saw a lot of good reviews and thats why i picked it up

[elder anchor]

you can get it to work

once you figure it out it'll proly serve you good

but until then

it sucks you got scammed

[rapid wolf]

would it be possible to loctite the pins that hold the wings in

or would that not allow them to move back and forth and unlock

[rapid wolf]

im very stubborn at making things work so hopefully this will turn out like that too

[elder anchor]

yes

if they have threads

[rapid wolf]

ill have to shake one loose and see then

but afaik theyre just kinda there to hold them in place and not supposed to move at all

[elder anchor]

if you use actual loctite and not loctite paste then it should create enough friction to hold them

fuck loctite paste

plumber PTSD

[rapid wolf]

ill get some on amazon over the weekend

make sure that shit dont move ever again

[river bison]

@elder anchor man now I’m getting the urge to make another block II with the FSP

Lmao

[river bison]

Fine tuned my scar sc

Mostly consistent and the hopup is good to go and it’s accurate to 150 ft

For a short gun it’s not bad

[river bison]

Lol you really like ucp huh @cloud pasture

[cloud pasture]

2nd kit i ever made aha

First kit^

[river bison]

I hated UCP because of discoloration

Every UCP gear I used and owned in the army turned brown yellow over time from all the dirt

[cloud pasture]

Ended up getting rid of em both idk what kinda style i wanna do

[cloud pasture]

Ew

[river bison]

Go multicam, it’s economical

Or coyote tan

[cloud pasture]

Thought abt it but the feilds i play at are dark as fuck and it just makes sense to wear black

[river bison]

I need to post a picture one of these days of my kit

[cloud pasture]

I basically disappear 3 mins into a match

[river bison]

Just can’t be assed to wear it at home

[cloud pasture]

Fuck yea do it

[cloud pasture]

3 times a day bc why tf not 🤷🏽‍♂️😂

[river bison]

Older picture of me in kit from behind haha

[novel fractal]

Gotta love airshit

Im on the left

Thanks to the other guy in the photo for giving me his Monolith

With its Belt

[limber flame]

drip goes hard

[strong egret]

Za monolith

[novel fractal]

Exactly

All my homies love big plate carriers

[elder anchor]

Do it lol

Can never have enough block IIs

You painted your MCX yet?

[low umbra]

🔥

wallpaper worthy even

[river bison]

Nah I’m keeping it this color

[novel fractal]

Its my phone wallpaper lmao

[low umbra]

sick

[honest meadow]

multiglam it up

[lilac arrow]

Do you guys know how much it'd take for like a 800ml green gas to run out?

I really forgot

I'm thinking whether I should get 800ml WE Green Gas (more expensive) or 1000ml ProTech Green Gas (cheaper). Curious if it is any different, especially if I were to own a WE handgun.

[crystal rover]

Use propane

[limber flame]

europe

harder to get raw propane

generally swiss arms oil free is the go to

the brown ASG ultrair ones are solid

[lilac arrow]

Why tho? Isn't green gas propane + silicone oil?

[limber flame]

silicone oil in gas is massive fudd lore/myths with gas guns

it doesn't actually help

anything anyone says about seals is irrelevant since the material they make them out of now doesn't absorb silicone oil

so it makes zero difference

just gets oil in the parts that dont need it

such as
your nozzle, hopup and barrel

[lilac arrow]

Ohh, alright. But is that the case with WE Glocks tho?

[zealous blaze]

then what does the silicone do exactly? wanna know what i shove on my aap mags 😅

[lilac arrow]

making sure

[limber flame]

thats the case on all guns

[limber flame]

nothing

it just gunks up your gun

[lilac arrow]

Then what do you use to clean your airsoft guns?

[limber flame]

rubbing alcohol

[zealous blaze]

cleaning rod, microfiber cloth for the barrel, alchool and a kitchen paper towel

[lilac arrow]

When do I need to clean?

[zealous blaze]

i do it once every two matches, but it really depends on how dirtied it got from the match

[limber flame]

about 15 years ago the seals on gas mags used to use silicone O-rings which absorbed the oil and actually helped keep em stop drying up

but now they dont need any

[zealous blaze]

i been doing it in an abandoned work building every sunday and i dont really need to deep clean it, i just do the abrrel in case something got in there

[limber flame]

just keeping a bit of gas in your mags is fine

https://www.youtube.com/watch?v=p_4PWj-w9R8&t=319s

https://www.youtube.com/watch?v=5JPLe5R8-Ms

everything you ever need to know how to maintain your mags and clean your guns

i reccomend keeping these vids saved

[zealous blaze]

yeap it was what i saw when i got my mp7

[lilac arrow]

Well, I'm not going to go on any airsoft matches any time soon I suppose. I'd need more stuff so more money to spend, and stuff with my luck will probably break as well. I will just probably collect airsoft replicas and just shoot them to targets for fun.

[zealous blaze]

2nd hand tokyo marui mp7 my beloved

[lilac arrow]

In that case how much cleaning would be needed?

[limber flame]

generally cleaning is only if it gets dirty or gets used a lot

most of the time it doesn't really need it

[zealous blaze]

^

if it stays in a rack doing nothing you gotta clean it from dust

[limber flame]

i clean mine after rainy and muddy days

[zealous blaze]

thats abt it

[lilac arrow]

Yeah I'll avoid stuff like sand and dirt for sure.

[limber flame]

or if ive used it as a primary

but if it starts to get sluggish or inaccurate then give it a clean

[zealous blaze]

^

p much that

[limber flame]

especially if it sounds grainy when racking

[zealous blaze]

that and if its gbb careful with putting too much lube/grease

on my mp7 i dont put much, test the sliding parts, if its still not smooth i give another coat until i feel its good

[limber flame]

when applying it you only need a really fine coat

enough to where you can barely see it

stops it being a dirt magnet

[zealous blaze]

and dont be an idiot like me and check how you took it out, i somehow managed to get the internal parts put reversed and itwas stuck andi panicked until i realised i had to take it off safety

[limber flame]

i remember reassembling my p09 wrong and when i put the slide on
it went too far back

caused the chamber to drop into the magwell

[lilac arrow]

Could I buy a holster intended for a real Glock 19X if I'm getting a WE G19X? Or something from Umarex or WE (if they make any) would work better?

[zealous blaze]

oh yeah i gotta make my holster

thanks for reminding me of that

[limber flame]

generally you can find some cheap kydex holsters

can probably find a cheap and cheerful nuprol one on amazon or some shit

not kydex but not terrible

aslong as it retains to gun mostly

[zealous blaze]

also quick question, there any proper way to take out the grease/lube? i passed mine with a kitchen paper otwel

not sure if i missed something

[limber flame]

i just generally get a dry paper towel and fold the end to make it stiffer to wipe away all the excess

then i go over it with a cloth and rubbing alcohol

get rid of the rest

[zealous blaze]

i c

[lilac arrow]

Alright, so green gas without silicone oil is better?

[limber flame]

mhm

regular green gas does work but for longevity and ease of maintenance the dry stuff is better

can bulk order on a lot of websites aswell

[crystal rover]

Propane is usually a lot cheaper, also shoot at 10 psi higher

[limber flame]

not in europe

[crystal rover]

Oof

[limber flame]

almost all our propane has butane in it

thars why i recommended the swiss arms or ultrair stuff

[crystal rover]

You get triple the amount of gas for like 4 dollars less in the us

[limber flame]

yep

and people still complain

[crystal rover]

This is why we thank uncle sam

[zealous blaze]

oh yeah also another question, not gbb stuff, but you guys think 1000 lumens is usually enough to make someone hesitate from getting out of cover?

[limber flame]

generally yes

but lumens arent everything with lights

throw, spill and candela are also factors